View STP270N8F7_8107810.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. october 2013 docid024006 rev 3 1/21 21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 n-channel 80 v, 0.0017 typ., 180 a, stripfet? vii deepgate power mosfets in h 2 pak-2, h 2 pak-6 and to-220 packages datasheet ? production data figure 1. internal schematic diagram features ? ultra low on-resistance ? 100% avalanche tested applications ? switching applications description these devices are n-channel power mosfets developed using the 7 th generation of stripfet? deepgate? technology, with a new gate structure. the resulting power mosfet exhibits the lowest r ds(on) in all packages. !-v $4!" ' 3 $4!" ' 3 ( 0!+ ( 0!+ 4/ 1 2 3 tab 1 2 3 tab h 2 pak-2 to-220 h 2 pak-6 1 tab 7 order codes v ds r ds(on) max i d sth270n8f7-2 80 v 0.0021 180 a sth270n8f7-6 STP270N8F7 0.0025 table 1. device summary order codes marking package packaging sth270n8f7-2 270n8f7 h 2 pak-2 tape and reel sth270n8f7-6 h 2 pak-6 STP270N8F7 to-220 tube www.st.com
contents sth270n8f7-2, sth270n8f7-6, STP270N8F7 2/21 docid024006 rev 3 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 packaging information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
docid024006 rev 3 3/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 electrical ratings 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v ds drain-source voltage 80 v v gs gate-source voltage 20 v i d (1) 1. limited by package drain current (continuous) 180 a i d (1) drain current (continuous) at t c = 100 c 180 a i dm (2) 2. pulse width limited by safe operating area drain current (pulsed) 720 a p tot (3) 3. this value is rated according to r thj-c total dissipation at t c = 25 c 315 w e as (4) 4. starting t j = 25c, i d = 65 a, v dd = 50 v single pulse avalanche energy 1.16 j t j operating junction temperature -55 to 175 c t stg storage temperature c table 3. thermal resistance symbol parameter value unit h 2 pak-2, h 2 pak-6 to-220 r thj-case thermal resistance junction-case 0.48 c/w r thj-pcb (1) 1. when mounted on fr-4 board of 1 inch 2 , 2oz cu thermal resistance junction-pcb 35 c/w r thj-amb thermal resistance junction-ambient max 62.5 c/w
electrical characteristics sth270n8f7-2, sth270n8f7-6, STP270N8F7 4/21 docid024006 rev 3 2 electrical characteristics (t case =25 c unless otherwise specified) table 4. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage (v gs = 0) i d = 250 a 80 v i dss zero gate voltage drain current (v gs = 0) v ds = 80 v v ds = 80 v; t c =125 c 10 100 a a i gss gate body leakage current (v ds = 0) v gs = +20 v 100 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 2 4 v r ds(on) static drain-source on- resistance for h 2 pak-2, h 2 pak-6: v gs = 10 v, i d = 90 a 0.0017 0.0021 for to-220: v gs = 10 v, i d = 90 a 0.0021 0.0025 table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds =50 v, f=1 mhz, v gs =0 - 13600 - pf c oss output capacitance - 2050 - pf c rss reverse transfer capacitance -236 - pf q g total gate charge v dd =40 v, i d = 180 a v gs =10 v figure 19 -193 - nc q gs gate-source charge - 96 - nc q gd gate-drain charge - 46 - nc table 6. switching times symbol parameter test conditions min. typ. max. unit t d(on) turn-on delay time v dd =40 v, i d = 90 a, r g =4.7 , v gs = 10 v figure 18 -56-ns t r rise time - 180 - ns t d(off) turn-off delay time - 98 - ns t f fall time - 42 - ns
docid024006 rev 3 5/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 electrical characteristics table 7. source drain diode symbol parameter test conditions min typ. max unit i sd source-drain current - 180 a i sdm (1) 1. pulse width limited by safe operating area source-drain current (pulsed) - 720 a v sd (2) 2. pulsed: pulse duration=300s, duty cycle 1.5% forward on voltage i sd = 90 a, v gs =0 - 1.2 v t rr reverse recovery time i sd = 180 a, di/dt = 100 a/s, v dd =64 v, t j =150 c -78 ns q rr reverse recovery charge - 182 nc i rrm reverse recovery current - 4.7 a
electrical characteristics (curves) sth270n8f7-2, sth270n8f7-6, STP270N8F7 6/21 docid024006 rev 3 3 electrical characteristics (curves) figure 2. safe operating area for h 2 pak-2 and h 2 pak-6 figure 3. safe operating area for to-220 i d 10 1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 1ms 10ms 0.1 tj=175c tc=25c single pulse 100 100s am15670v1 i d 10 1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 1ms 10ms 0.1 tj=175c tc=25c single pulse 100 100s am15671v1 figure 4. thermal impedance figure 5. gate charge vs gate-source voltage k 10 t p (s) -4 10 -3 10 -2 0.1 10 -5 0.01 am15684v1 single pulse d =0.5 0.05 0.02 0.01 0.2 0.1 v gs 6 4 2 0 0 50 q g (nc) (v) 150 8 100 10 v dd =40v i d =180a 12 200 am15683v1 figure 6. output characteristics for to-220 figure 7. transfer characteristics for to-220 i d 150 100 50 0 0 4 v ds (v) (a) 2 6 200 250 6v 7v v gs =8, 9, 10v 300 5v 8 350 am15673v1 i d 150 100 50 0 0 4 v gs (v) 8 (a) 2 6 200 250 300 350 1 3 5 7 9 v ds =2v am15709v1
docid024006 rev 3 7/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 electrical characteristics (curves) figure 8. output characteristics for h 2 pak-2 and h 2 pak-6 figure 9. transfer characteristics for h 2 pak-2 and h 2 pak-6 i d 150 100 50 0 0 4 v ds (v) (a) 2 6 200 250 6v 7v v gs =8, 9, 10v 300 5v 8 350 am15672v1 i d 150 100 50 0 0 4 v gs (v) 8 (a) 2 6 200 250 300 350 1 3 5 7 9 v ds =2v am15682v1 figure 10. normalized b vdss vs temperature figure 11. static drain-source on-resistance for h 2 pak-2 and h 2 pa k -6 figure 12. static drain-source on-resistance for to-220 figure 13. capacitance variations bv dss -75 t j (c) (norm) -50 0 -25 0.96 0.98 1 1.02 1.04 i d =1 ma 25 50 75 100 125 150 am15681v1 r ds(on) 1.72 1.70 1.68 1.66 0 40 i d (a) (m ) 20 60 1.74 140 80 100 120 160 180 v gs =10v am15674v1 r ds(on) 2.15 2.10 2.05 2.00 0 40 i d (a) (m ) 20 60 2.20 140 80 100 120 160 180 v gs =10v am15675v1 c 6000 4000 2000 0 0 20 v ds (v) (pf) 10 30 ciss coss crss 40 50 60 8000 10000 12000 14000 16000 am15676v1
electrical characteristics (curves) sth270n8f7-2, sth270n8f7-6, STP270N8F7 8/21 docid024006 rev 3 figure 14. source-drain diode forward characteristics figure 15. normalized gate threshold voltage vs temperature figure 16. normalized on-resistance vs temperature for h 2 pak-2 and h 2 pak-6 figure 17. normalized on-resistance vs temperature for to-220 v sd 0 40 i sd (a) (v) 20 100 60 80 0.5 0.6 0.7 0.8 0.9 1 t j =-50c t j =150c t j =25c 120 140 160 am15680v1 v gs(th) 0.7 0.6 0.5 0.4 -75 t j (c) (norm) -50 0.8 75 -25 125 i d =250a 0 25 50 100 150 0.9 1 1.1 1.2 am15677v1 r ds(on) 1.2 1 0.8 0.6 t j (c) (norm) 1.4 0.4 -75 -50 75 -25 125 0 25 50 100 i d =90 a v gs =10 v 150 1.6 1.8 2 am15678v1 r ds(on) 1.2 1 0.8 0.6 t j (c) (norm) 1.4 0.4 -75 -50 75 -25 125 0 25 50 100 i d =90 a v gs =10 v 150 1.6 1.8 am15679v1
docid024006 rev 3 9/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 test circuits 4 test circuits figure 18. switching times test circuit for resistive load figure 19. gate charge test circuit figure 20. test circuit for inductive load switching and diode recovery times figure 21. unclamped inductive load test circuit figure 22. unclamped inductive waveform figure 23. switching time waveform am01468v1 v gs p w v d r g r l d.u.t. 2200 f 3.3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =const 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fast diode d s l=100 h f 3.3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3.3 f v dd am01472v1 v (br)d ss v dd v dd v d i dm i d am0147 3 v1 v d s t on td on td off t off t f t r 90 % 10 % 10 % 0 0 90 % 90 % 10 % v g s
package mechanical data sth270n8f7-2, sth270n8f7-6, STP270N8F7 10/21 docid024006 rev 3 5 package mechanical data table 8. h2pak-2 mechanical data dim. mm min. typ. max. a4.30 - 4.80 a1 0.03 0.20 c1.17 1.37 e4.98 5.18 e0.50 0.90 f0.78 0.85 h 10.00 10.40 h1 7.40 7.80 l 15.30 15.80 l1 1.27 1.40 l2 4.93 5.23 l3 6.85 7.25 l4 1.5 1.7 m2.6 2.9 r0.20 0.60 v0 8
docid024006 rev 3 11/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 package mechanical data figure 24. h2pak-2 drawing 8 159712_c
package mechanical data sth270n8f7-2, sth270n8f7-6, STP270N8F7 12/21 docid024006 rev 3 figure 25. h2pak-2 recommended footprint (in mm) 8 159712_c
docid024006 rev 3 13/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 package mechanical data table 9. h2pak-6 mechanical data dim. mm min. typ. max. a4.30 - 4.80 a1 0.03 0.20 c1.17 1.37 e2.34 2.74 e1 4.88 5.28 e2 7.42 7.82 e0.45 0.60 f0.50 0.70 h 10.00 10.40 h1 7.40 7.80 l 14.75 15.25 l1 1.27 1.40 l2 4.35 4.95 l3 6.85 7.25 l4 1.5 1.75 m1.90 2.50 r0.20 0.60 v0 8
package mechanical data sth270n8f7-2, sth270n8f7-6, STP270N8F7 14/21 docid024006 rev 3 figure 26. h2pak-6 drawing 8 15969 3 _rev_f
docid024006 rev 3 15/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 package mechanical data figure 27. h2pak-6 recommended footprint (dimensions are in mm) footprint_rev_f
package mechanical data sth270n8f7-2, sth270n8f7-6, STP270N8F7 16/21 docid024006 rev 3 table 10. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95
docid024006 rev 3 17/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 package mechanical data figure 28. to-220 type a drawing ?type!?2ev?4
packaging information sth270n8f7-2, sth270n8f7-6, STP270N8F7 18/21 docid024006 rev 3 6 packaging information table 11. h2pak-2 and h2pak-6 tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
docid024006 rev 3 19/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 packaging information figure 29. tape figure 30. reel p1 a0 d1 p0 f w e d b0 k0 t u s er direction of feed p2 10 pitche s c u m u l a tive toler a nce on t a pe +/- 0.2 mm u s er direction of feed r bending r a di us top cover t a pe am0 88 52v2 a d b f u ll r a di us g me asu red a t h ub c n reel dimen s ion s 40mm min. acce ss hole at s lot loc a tion t t a pe s lot in core for t a pe s t a rt 25 mm min. width am0 88 51v2
revision history sth270n8f7-2, sth270n8f7-6, STP270N8F7 20/21 docid024006 rev 3 7 revision history table 12. document revision history date revision changes 03-dec-2012 1 first release. 09-apr-2013 2 ? modified: r ds(on) max values on features table, i dss , i gss values on table 4 , r ds(on) value for h 2 pak-2, the entire typical values on table 5 and 6 , v sd test conditions and max values, t rr , q rr , i rrm typical values on table 7 ? inserted: section 3: electrical characteristics (curves) ? document status promoted to preliminary data to production data ? added: h 2 pak-6 package ? minor text changes 11-oct-2013 3 ? modified: c rss typical value in table 5 ? updated: section 5: package mechanical data ? updated: figure 18 , 19 , 20 and 21 ? minor text changes
docid024006 rev 3 21/21 sth270n8f7-2, sth270n8f7-6, STP270N8F7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STP270N8F7

	To Download STP270N8F7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .