strato led drivers 35w, single output strato switch mode driver technology is designed to generate one constant current output from a wide range ac input. the size and performance of these products make them the ideal choice for led lighting applications. strato is designed for directly powering leds in commercial & industrial lighting applications. the product s extremely small form factor and high efficiency makes it suitable for integration into most light fixtures and standard electrical junction boxes. a hos t of integrated control features: ? simplify light fixture design ? ease safety approval cycles ? lower fixture complexity and cost features applications and benefits wide range inpu t: 120 , 240 , or 277 vac constant current output for powering leds directly high efficiency ~90% compact design adjustable output current settings dimmable with (0 - 10vdc) input temperature protection for leds convection cooled long life wide temperature range rohs compliant led module temp sensor ac input strat o led driver +dim - dim + led ts - led commercial wall dimmer (0 - 10vdc) source or variable resistor ~ strato s versatile control features: ? a te mperature sensor (ntc thermistor) protects the led from over - temperature. ? a 2 wire dimming input provides both output trimming, and 10 - 100% iout dimming function.
strato led drivers 35w, single output eu and row roal electr onics s.p.a via jesina 56/a 60022 castelfidardo (an) - italy tel:+39 071 721461 fax:+ 39 071 72146 480 north america roal electronics usa, inc. 701 main st., suite 405 stroudsburg, pa18360 phone: + 1 570 421 5750 fax: +1 570 421 5687 ds 1_strato35 cc plastic_rev10 - page. 2 / 5 www.roallivingenergy.com subject to change without notice performance requirements: meets the requirements of iec 62384; control gear for led mod ules table 1 absolute maximum driver ratings model number iout max pout max vout (m in ) vout (m ax ) vout no load max package dash # ma watts vdc vdc vdc rsld035 - 21 500 36.75 52.5 73.5 88 .2 rsld035 - 16 700 39.2 40.0 56.0 60.0 rsld035 - 15 700 36.8 37.5 52.5 60.0 rsld035 - 14 700 34.3 35.0 49.0 59.5 rsld035 - 13 700 31.9 32.5 45.5 54.6 rsld035 - 12 700 29.4 30.0 42.0 50.0 rsld035 - 11 700 27 27.5 38.5 46.2 rsld035 - 10 700 24.5 25.0 35.0 4 2.0 rsld035 - 0 9 1000 31.5 22.5 31.5 37.8 rsld035 - 9a 700 22.1 22.5 31.5 37.8 rsld035 - 0 8 1150 32.2 20.0 28.0 33.6 rsld035 - 0 7 1400 34.3 17.5 24.5 29.4 *rsld035 - 7a 720 17.6 17.5 24.5 29.4 rsld035 - 6a 1240 25 14.5 20.1 24.2 rsld035 - 0 6 1400 29.4 15.0 21.0 25.0 rsld035 - 0 5 1750 30.6 12.5 17.5 21.0 rsld035 - 0 4 1750 24.5 10.0 14.0 16.0 *rsld035 - 4a 1300 18.2 10.0 14.0 16.0 *rsld035 - 0 3 1750 18.4 7.5 10.5 12.6 * certain models have lower output set points for compatibility with specific led modules a nd arrays. as a result, these units will exhibit lower efficiency and lower power factor than specified herein. refer to strato application note #3, output voltage range f or proper device selection . input and output specification output voltage: 7.5 to 73.5 vdc see table 1 for details output current: 0. 5 0 to 1.75 amps see table 1 for details output current regulation: +/ - 3% of max rating ripple current: <4 5 % (p - p) of maximum output current output over - voltage, over - current and short - circuit protection (hiccup), and over - temperature protection with auto recovery input voltage: 120 / 240 / 277 vac nominal 47 - 63 hz frequency range efficiency: 90% typical * isolation: meets ul60950 - 1 reinforced/double insulation , nec (class 2) en60598 - 1 class ii input power factor: > 0 .90 * input harmonics: meets en61000 - 3 - 2, - 3 * * @ vin nominal and >80% load for model s >20w and >90% for models <20w
strato led drivers 35w, single output eu and row roal electr onics s.p.a via jesina 56/a 60022 castelfidardo (an) - italy tel:+39 071 721461 fax:+ 39 071 72146 480 north america roal electronics usa, inc. 701 main st., suite 405 stroudsburg, pa18360 phone: + 1 570 421 5750 fax: +1 570 421 5687 ds 1_strato35 cc plastic_rev10 - page. 3 / 5 www.roallivingenergy.com subject to change without notice output controls: two dedicated inputs provide co ntrol and safety features. dim : a dimming input can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (1 to 10vdc), or a variable resistor when using the recommended number of leds. the input permits 100% to 80% trimming and 100% to 10% dimming. this permits active control of the driver and may be used for trimming and dimming purposes. see roal strato application note 1 for details on functionality and compatibility with standard industry pra ctices. ts : the temperature input may be connected to a 100k ntc thermistor. the thermistor should be located on the led assembly to monitor its temperature. if the temperature exceeds a predetermined set point, the output current of the module is automat ically reduced to regulate the temperature of the led at a safe level. see roal strato application note 1 for details. packaging options: partially encapsulated with abs plastic body enclosure i/o connections: flying leads, 18awg on power leads, 20awg on control leads, 152mm long, 105c rated, stranded, stripped by approximately 9.5mm and tinned mounting details: universal mounting clips, and 6 mounting locations per package allow installer to choose the most suitable position for the mounting fe et . ingress protection: ip6 4 rated mechanical details universal mount a patent pending design controls
strato led drivers 35w, single output eu and row roal electr onics s.p.a via jesina 56/a 60022 castelfidardo (an) - italy tel:+39 071 721461 fax:+ 39 071 72146 480 north america roal electronics usa, inc. 701 main st., suite 405 stroudsburg, pa18360 phone: + 1 570 421 5750 fax: +1 570 421 5687 ds 1_strato35 cc plastic_rev10 - page. 4 / 5 www.roallivingenergy.com subject to change without notice package: rsld035 outline drawings max dimensions: 70mm x 40mm x 27mm, 2.7 6 x 1.57 x 1.06 volume : 75.6 cm3, 4.59 in3 mass : 142 grams, 5 oz .
strato led drivers 35w, single output eu and row roal electr onics s.p.a via jesina 56/a 60022 castelfidardo (an) - italy tel:+39 071 721461 fax:+ 39 071 72146 480 north america roal electronics usa, inc. 701 main st., suite 405 stroudsburg, pa18360 phone: + 1 570 421 5750 fax: +1 570 421 5687 ds 1_strato35 cc plastic_rev10 - page. 5 / 5 www.roallivingenergy.com subject to change without notice operating temperature: - 30 to +90 c case temperature without derating operating relative humidity: 5% to 95%, non condensing storage temperature: - 40 c to +85 c surface tempera ture: exposed surfaces <90 c under all operating conditions cooling: convection cooled emi and emc: conducted and radiated emi: en55015 class b, fcc 47cfr part 15 class b susceptibility: en61000 - 4 - 2, - 3, - 4, - 5, - 6, and - 11 ansi c62.41 - 1991 category a1, 2.5kv ringwave ul 60950 - 1 recognized, ul8750 recognized class 2 output. approved for damp locations. en61347 - 2 - 13 electronic control gear for led modules enec mark and ce mark for eu. notes regarding european (enec) approvals: 1. all models w ith vout < 25vdc are selv equivalent per en61347 - 2 - 13. 2. all models are considered isolated control gear per en61347 - 2 - 13 environmental safety agency approvals environmental / emc roal electronics, s.p.a. may change product specifications and accordingly the information presented in this document. customers are responsible for their products and applications using roal electronics, s.p.a. products. roal electronics, s.p.a. assumes no liability from the use of its products outside of specifications. no license is granted to any intellectual proper ty rights by this document. roal electronics, s.p.a. disclaims all representations and warranties of any kind, express or implied, including, but not limited to, implied warranties of noninfringement, merchantability and fitness for a particular purpose.
|
