caution: it is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by esd. ASSR-V621 and assr-v622 dual channel photovoltaic mosfet driver (6.5v/15 ? a) data sheet description the assr-v62x series is specially designed to drive high power mosfets. it consists of an algaas infrared light- emitting diode (led) input stage optically coupled to an output detector circuit. the detector consists of a high- speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage mosfets exter- nally. the relay driver turns on (contact closes) with a min- imum input current of 3ma through the input led. the relay driver turns off (contact opens) with an input voltage of 0.8v or less. the dual channel confi gurations, ASSR-V621 and assr- v622, allow 2 independent mosfets to be driven. it has the versatility to double the photovoltaic voltage by con- necting the 2 channels in series or to double the short circuit current by connecting the 2 channels in parallel. they are available in 8-pin dip and gull wing surface mount packages. features ? dual channel photovoltaic mosfet driver ? open circuit voltage: 7v typical ? short circuit current: 20 ? a typical ? low input current: cmos compatibility ? fast switching speed: 0.3ms (ton), 0.03ms (toff ) typical ? high input-to-output insulation voltage (safety and regulatory pending approvals) - 3750 vrms for 1 min per ul1577 - csa component acceptance applications ? solid state relay module ? voltage supply for electronic circuits lead (pb) free rohs 6 fully compliant r o h s 6 f u lly co mpl iant o p tion s avai l a bl e ; -xxxe d enote s a l ea d-f ree p ro d uct
2 schematic ASSR-V621-002e opto-isolation turn-off circuit 8 7 6 5 1 2 3 4 turn-off circuit assr-v622-002e opto-isolation turn-off circuit 1 2 8 7 3 4 6 5 turn-off circuit ordering information assr-xxxx is ul recognized with 3750 vrms for 1 minute per ul1577 and is approved under csa component accep- tance notice #5. part number option package surface mount gull wing tape & reel quantity rohs compliant ASSR-V621 -002e 300 mil dip-8 50 units per tube -302e x x 50 units per tube -502e x x x 1000 units per reel assr-v622 -002e 300 mil dip-8 50 units per tube -302e x x 50 units per tube -502e x x x 1000 units per reel to order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. example: ASSR-V621-002e to order product of 300mil dip-8 package in tube packaging and rohs compliant. option datasheets are available. contact your avago sales representative or authorized distributor for information.
3 package outline drawings 8-pin dip package 8-pin dip package with gull wing surface mount option 300 1.080 0.320 (0.043 0.013) 2.54 0.25 (0.100 0.010) 0.51 (0.020) min. 0.65 (0.025) max. 4.70 (0.185) max. 2.92 (0.115) min. 5 typ. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002) 7.62 0.25 (0.300 0.010) 6.35 0.25 (0.250 0.010) 9.65 0.25 (0.380 0.010) 1.78 (0.070) max. 1.19 (0.047) max. a xxxx yyww date code dimensions in millimeters and (inches). 5 6 7 8 4 3 2 1 option code* ul recognition ur type number option numbers 300 and 500 not marked. 3.56 0.13 (0.140 0.005) lead free 0.635 0.25 (0.025 0.010) 12 nom. 9.65 0.25 (0.380 0.010) 0.635 0.130 (0.025 0.005) 7.62 0.25 (0.300 0.010) 5 6 7 8 4 3 2 1 9.65 0.25 (0.380 0.010) 6.350 0.25 (0.250 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) land pattern recommendation 1.080 0.320 (0.043 0.013) 3.56 0.13 (0.140 0.005) 1.780 (0.070) max. 1.19 (0.047) max. 2.54 (0.100) bsc dimensions in millimeters (inches). lead coplanarity = 0.10 mm (0.004 inches). note: floating lead protrusion is 0.25 mm (10 mils) max. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)
4 lead free ir profi le regulatory information the ASSR-V621-002e and assr-v622-002e are approved by the following organizations: ul approved under ul 1577, component recognition program up to v iso = 3750 v rms csa approved under csa component acceptance notice #5. 217 c ramp-down 6 c/sec. max. ramp-up 3 c/sec. max. 150 - 200 c 260 +0/-5 c t 25 c to peak 60 to 150 sec. 20-40 sec. time within 5 c of actual peak temperature t p t s preheat 60 to 180 sec. t l t l t smax t smin 25 t p time (seconds) temperature ( c) notes: the time from 25 c to peak temperature = 8 minutes max. t smax = 200 c, t smin = 150 c use of non-chlorine-activated fluxes is highly recommended. note: non-halide fl ux should be used. insulation and safety related specifi cations parameter symbol ASSR-V621-002e assr-v622-002e units conditions minimum external air gap (clearance) l(101) 7.1 mm measured from input terminals to output terminals, shortest distance through air. minimum external tracking (creepage) l(102) 7.4 mm measured from input terminals to output terminals, shortest distance path along body. minimum internal plastic gap (internal clearance) 0.08 mm through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. tracking resistance (comparative tracking index) cti 175 v din iec 112/vde 0303 part 1 isolation group (din vde0109) iiia material group (din vde 0109)
5 absolute maximum ratings parameter symbol min. max. units note storage temperature t s -55 125 c operating temperature t a -40 85 c lead soldering cycle temperature 260 c time 10 s input current average i f 30 ma surge 300 transient 1000 reversed input voltage v r 5v input power dissipation p in 100 mw solder refl ow temperature profi le see lead free ir profi le recommended operating conditions parameter symbol min. max. units note input current (on) i f(on) 330ma input voltage (off) v f(off) 0 0.8 v operating temperature t a -40 +85 c package characteristics unless otherwise specifi ed, operating temperature t a = 25c. parameter symbol min. typ. max. units conditions fig. note input-output momentary withstand voltage v iso 3750 vrms rh 50%, t = 1 min 1 input-output resistance r i-o 10 12 v i-o = 500 vdc input-output capacitance c i-o 0.6 pf f = 1 mhz; v i-o = 0 vdc electrical specifi cations (dc) for operating t a = +25c parameter symbol min. typ. max. units conditions fig. note open circuit voltage v oc 6.5 7 v i f =10ma, i o =0ma short circuit current i sc 15 20 ? a i f =10ma, v o =0v input reverse breakdown voltage v r 5v i r =10 ? a input forward voltage v f 1.1 1.3 1.7 v i f =10ma switching specifi cations (ac) for operating t a = +25c parameter symbol min. typ. max. units conditions fig. note turn on time t on 0.28 ms i f =10ma, c l =1nf turn off time t off 0.03 ms i f =10ma, c l =1nf note: 1. device is considered as a two terminal device; pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted.
for p ro d uct in f or m ation an d a co mp lete li s t o f d i s tri b utor s , p lea s e go to our we b s ite: www.avagotech.com avago, avago technologie s , an d the a logo are tra d e m ark s o f avago technologie s in the unite d state s an d other countrie s . data s u b ject to change. co py right ? 2005 - 2012 avago technologie s . all right s re s erve d . av02 - 0259en - march 19, 2012 0 10 20 30 40 50 60 70 -50 -25 0 25 50 75 100 t a - temperature - c t a - temperature - c i f =3ma i sc -shortcircuitoutputcurrent- a 0 2 4 6 8 10 -50 -25 0 25 50 75 100 v oc - open circuit output voltage - v 0 100 200 300 400 500 600 i f =10ma t on - turn on time - s t off - turn off time - s 0 10 20 30 40 50 -50 -25 0 25 50 75 100 i f =10ma i f =30ma i f =10ma i f =5ma i f =20ma i f =5ma i f =30ma i f =10ma i f =20ma i f =3ma -50 -25 0 25 50 75 100 t a - temperature - c t a - temperature - c figure 1. short circuit output current vs figure 2. v oc vs temperature figure 3. t on vs temperature figure 4. t off vs temperature
|
