oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl48.0m-10a 48.0mhz if saw filter 10.10mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o pass band response and group delay variation notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl48.0m-10a january 2011 rev a 48.0mhz if saw filter 10.10mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input + l input - e output + f output - test fixture & values input l1=890nh, l2=47nh output c1=36pf, l3=970nh source/load impedance 50/2000 ?
oscilent part number 813-sl48.0m-10a january 2011 rev a 48.0mhz if saw filter 10.10mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -40 25 85 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 2000 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 48.0 - insertion loss at fo db - 13.5 16.0 temperature coefficient ppm/c - -86 - amplitude ripple within fo 4.25 mhz db p-p - 0.6 1.2 group delay variation within fo 4.5 mhz nsec - 120 220 absolute delay at fo sec - 1.55 - bandwidth at ?1.0 db mhz 9.00 10.10 - bandwidth at ?3.0 db mhz - 10.50 - relative attenuation (ref: max il) fc 5.5 mhz db - 5.5 - fc 7.75 mhz db 35 43 - fc 10.0 mhz db 40 53 - fc +15.0 ~ 25.0 mhz db 40 52 - fc -15.0 ~ 25.0 mhz db 40 68 -
oscilent part number 813-sl48.0m-10a january 2011 rev a 48.0mhz if saw filter 10.10mhz bandwidth product specification p. 3 www.oscilent.com frequency response pass band response and group delay variation
|