ds30137 rev. b-0 1 of 2 rmb2s - rmb6s characteristic symbol rmb2s rmb4s rmb6s unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rmm v rwm v dc 200 400 600 v rms reverse voltage v rms 140 280 420 v average forward rectified current (note 1) t a = @ 40 c i o 0.5 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load (jedec method) i fsm 30 a instantaneous voltage drop @ 0.4a (per element) v f 1.15 v peak reverse current at rated @ t a = 25 c dc blocking voltage (per element) @ t a = 125 c i r 5.0 100 a maximum reverse recovery time (note 3) t rr 150 250 ns typical junction capacitance (per element) (note 2) c j 13.0 pf typical thermal resistance, junction to ambient (note 1) r ja 85 k/w operating and storage temperature range t j ,t stg -55 to +150 c rmb2s - rmb6s 0.5a surface mount glass passivated fast recovery bridge rectifier features case: minidip, molded plastic terminals: plated leads, solderable per mil-std-202, method 2026 polarity: as marked on case weight: 0.125 grams (approx.) marking: type number plastic material: ul flammability classification rating 94v-0 mechanical data notes: 1. mounted on glass epoxy pc board. 2. measured at 1.0 mhz and applied reverse voltage of 4.0 v. 3. t rr test conditions: i f = 0.5a, i r = 1.0a, i rr = 0.25a. glass passivated die construction low forward voltage drop surge overload rating to 30a peak ideally suited for automatic assembly miniature package saves space on pc boards maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified a b c d e g h j l k minidip dim min max a 5.43 5.75 b 3.6 4.0 c 0.15 0.35 d 0.05 0.20 e 7.0 g 0.70 1.10 h 4.5 4.9 j 2.8 2.9 k 2.5 2.7 l 0.50 0.80 all dimensions in mm advance information
advance information ds30137 rev. b-0 2 of 2 rmb2s - rmb6s 0.01 0.1 1.0 10 0.2 0.6 1.0 1.4 i , instantaneous for ward current (a) f v , instantaneous forward voltage (v) fi g .2t y pical forward characteristics ( per le g) f t = 25 c pulse width = 300 s j 0.4 0.8 1.2 1.6 0 10 20 30 3 5 1.0 10 i , peak for ward surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum peak forward sur g e current ( per le g) t = 25 c single half sine-wave pulse width = 5.3ms (jedec method) a 1 10 100 1 10 100 c , junction cap acitance (pf) j v , reverse voltage (v) fi g .4 t y pical junction capacitance r t = 25 c f = 1.0mhz j 0.01 0.1 1.0 10 100 0 20 40 60 80 100 120 140 i , instantaneous reverse current ( a) r percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics ( per element ) t = 25 c j t = 125 c j 0 0.2 0.4 0.6 0.8 0 40 80 120 160 i , average for ward rectified current (a) (av) t , ambient temperature ( c) fi g . 1 output current deratin g curve a resistive or inductive load glass epoxy pc board alumina substrate
|
