material and finish model no. sxni-001t-p0.6 sxni-003t-p0.6 applicable wire q?y / reel mm 2 awg# 0.13 0.33 0.05 0.08 26 22 30 28 insulation o.d. (mm) 1.0 1.7 0.65 0.9 phosphor bronze, tin-plated (reflow treatment) contact crimping machine ap-k2n mks-l mks-l mk/sxni-001-06 mk/sxni-003-06 applicator crimp applicator dies aplmk sxni 001-06 aplmk sxni 003-06 crimp applicator with dies sxni- 001t- p0.6 ap-k2n sxni- 003t- p0.6 7,000 10,000 ? ? ? ? ? ? 1 this connector is 2.5mm pitch wire-to-board connector that has a mechanism to prevent an incomplete mating by utilizing the inertial force when mating connector. in all circuits of connector, controlled key for preventing mismatching of mating is added, and two type connectors can be used in the same model. (see table below.) ?inertial lock structure ?finger-friendly design ?secure locking structure specifications ?current rating: 3a ac, dc (awg#22) ?voltage rating: 250v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) contact resistance: initial value/10m? max. after environmental testing/20m ? max. ?insulation resistance: 1,000m? min. ?withstanding voltage: 1,000v ac/minute ?applicable wire: awg #30 to #22 * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e 60389 1 certified lr20812 2 j50148340 xni connector 2.5mm pitch/disconnectable crimp style connectors (7.95) (12.6) 2.5 0.05 1.7 0.05 2.6 0.05 0.9 + 0.1 0 1.3 + 0.1 0 a 0.05 note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. 8.4 2.9 1.7 1.6 2 rohs compliance xnirp-( )v-a-s b( )b-xni s k-a-1 xnirp-( )v-b-r b( )b-xni r k-b-2 natural resin color (header/housing) red polarizing key pattern a key pattern housing model no. header model no. polarizing key pattern b pc board layout (viewed from component side) and assembly layout list of combinations contact
2 material and finish post: copper alloy, copper-undercoated, tin-plated (reflow treatment) wafer: glass-filled pa 66, ul94v-0, natural (ivory) circuits model no. dimensions (mm) a b q?y / box 2 3 4 5 6 7 8 9 10 11 15 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 35.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 40.0 500 500 250 250 250 200 200 200 150 150 100 b02b-xnisk-a-1 b03b-xnisk-a-1 b04b-xnisk-a-1 b05b-xnisk-a-1 b06b-xnisk-a-1 b07b-xnisk-a-1 b08b-xnisk-a-1 b09b-xnisk-a-1 b10b-xnisk-a-1 b11b-xnisk-a-1 b15b-xnisk-a-1 circuits model no. dimensions (mm) a b material q?y / bag glass-filled pbt, ul94v-0, natural (white) 2 3 4 5 6 7 8 9 10 11 15 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 35.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 40.0 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 xnirp-02v-a-s xnirp-03v-a-s xnirp-04v-a-s xnirp-05v-a-s xnirp-06v-a-s xnirp-07v-a-s xnirp-08v-a-s xnirp-09v-a-s xnirp-10v-a-s xnirp-11v-a-s xnirp-15v-a-s rohs compliance as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. s...natural (white) r...red xnirp-02v-a-s rohs compliance this product displays (lf)(sn) on a label. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. s...natural (ivory) r...red b02b-xnis k-a-1 7.75 a 2.5 b 10.1 a 2.5 b a 2.5 b 7.75 10.1 7.75 10.1 (2, 3 circuits) (4 to 11 circuits) (15 circuits) 2.6 1.7 2.5 a b 10.6 3.4 6.8 2.6 10.6 3.4 6.8 1.7 2.5 a b (2 to 11 circuits) (15 circuits) xni connector housing shrouded header
|
