SHC SHCs standard ?sensitive .100 grid surface mount com- mercial relay features hermetically sealed excellent rf switching 28 .100 grid surface mount commercial/industrial relays tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation SHC SHCd SHCs SHCsd electrical characteristics contact arrangement 2 form c (dpdt) contact material stationary: gold/platinum/palladium/silver alloy (gold plated) moveable: gold/platinum/palladium/silver alloy (gold plated) contact resistance before life: 100 milliohms max. (measured @ 10 ma @ 6 vdc) after life: 200 milliohms max. (measured @ 1 a @ 28 vdc) mechanical life expectancy 1 million operations SHCd SHCsd standard ?sensitive .100 grid surface mount diode suppressed commercial relay features suppression diode hermetically sealed excellent rf switching _ + contact ratings contact type operations load min. 1.0 a @ 28 vdc resistive 100,000 250 ma @ 115 vac, 60 hz & 400 hz resistive (case not grounded) 100,000 100 ma @ 115 vac, 60 hz & 400 hz resistive 100,000 0.2 a @ 28 vdc inductive (0.32 henry) 100,000 0.1 a @ 28 vdc lamp 100,000 30 a @ 50 mvdc low level 1,000,000 electrical characteristics coil voltage 5 to 26.5 vdc (SHC/SHCd) 5 to 48 vdc (SHCs/SHCsd) coil power SHC/SHCd: 660 mw max. @ 25? SHCs/SHCsd: 565 mw max. @ 25? duty cycle continuous pick-up voltage approximately 70% of nominal coil voltage pick-up sensitivity SHC/SHCd: 180 mw max. @ 25? SHCs/SHCsd: 90 mw max. @ 25? terminal view terminal view
tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation 29 .100 grid surface mount commercial/industrial relays SHC SHCd SHCs SHCsd standard coil data nom. coil pickup nom. coil max. coil coil resistance voltage power coil desig. voltage in ohms vdc (max.) (mw) voltage (vdc) ?0% @ 25? @ 25? @ 25? SHC/SHCd 5.0 64 3.8 391 5.8 5 6.0 98 4.9 367 8.0 6 9.0 220 7.0 368 12.0 9 12.0 400 9.0 360 16.0 12 18.0 880 14.0 368 24.0 18 26.5 1,600 18.0 439 32.0 26 SHCs/SHCsd 5.0 100 3.5 250 7.5 5 6.0 200 4.5 180 10.0 6 9.0 400 6.8 203 15.0 9 12.0 800 9.0 180 20.0 12 18.0 1,600 13.5 203 30.0 18 26.5 3,200 18.0 219 40.0 26 36.0 6,500 24.0 199 57.0 36 48.0 11,000 32.0 209 75.0 48 operating characteristics timing operate time: SHC/SHCd: 4.0 ms max. SHCs/SHCsd: 6.0 ms max. release time: SHC: 3.0 ms max. SHCs: 3.0 ms max. SHCd: 6.0 ms max. (suppression diode) SHCsd: 7.5 ms max. (suppression diode) dielectric withstanding voltage between open contacts: 350 vrms 60 hz between adjacent contacts: 350 vrms 60 hz between contacts & coil: 350 vrms 60 hz insulation resistance 1,000 megohms @ 500 vdc environmental characteristics temperature range -55? to + 85? weight SHC/SHCd: 0.09 oz. (2.55 gms) SHCs/SHCsd: 0.15 oz. (4.30 gms) vibration resistance 10 g s, 10 to 500 hz shock resistance 30 g s, 6 ? ms semiconductor characteristics diode 100 vdc peak inverse voltage (piv) 1.0 vdc max. transient voltage specifying a part number example : type diodes ground pin coils SHC d x -26 .100 (2.54) typ 8 pls .031 .003 (0.79) .035 .010 (0.98) ref .378 +.030/?020 (9.60) typ .375 (9.53) sq max 4 typ SHC/SHCd enclosure SHC/SHCd/SHCs/SHCsd header .280 (7.11) max .335 (8.51) sq max .360 (9.14) max 2 2 typ SHCs/SHCsd enclosure .380 (9.65) max .335 (8.51) sq max .460 (11.68) max 2 2 typ .100 (2.54) 4 plcs .045 (1.14) min. 8 plcs .410 (10.41) min .410 (10.41) min .200 (5.08) .200 (5.08) recommended solder pad layout
|
