ne5532, ne5532a dual low-noise operational amplifiers slos075c november 1979 revised june 2000 1 post office box 655303 ? dallas, texas 75265 equivalent input noise voltage 5 nv/ hz typ at 1 khz unity-gain bandwidth . . . 10 mhz typ common-mode rejection ratio . . . 100 db typ high dc voltage gain . . . 100 v/mv typ peak-to-peak output voltage swing 32 vtyp with v cc = 18 v and r l = 600 w high slew rate ...9 v/ m s typ wide supply voltage range . . . 3 v to 20 v designed to be interchangeable with signetics ne5532 and ne5532a package options include plastic small-outline (ps) package and standard plastic (p) dip description the ne5532 and ne5532a are high-performance operational amplifiers combining excellent dc and ac characteristics. they feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. these operational amplifiers are compensated internally for unity-gain operation. the ne5532a has specified maximum limits for equivalent input noise voltage. the ne5532 and ne5532a are characterized for operation from 0 c to 70 c. available options packaged devices t a plastic dual-in-line (p) plastic small-outline (ps) 0 cto70 5 c ne5532p ne5532ps 0 c to 70 c ne5532ap ne5532aps the ps package is available taped and reeled. add the suffix r to the device type (e.g., ne5532psr). symbol (each amplifier) in+ in out + copyright ? 2000, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. 1 2 3 4 8 7 6 5 out in in+ v cc v cc+ out in in+ p or ps package (top view)
ne5532, ne5532a dual low-noise operational amplifiers slos075c november 1979 revised june 2000 2 post office box 655303 ? dallas, texas 75265 schematic (each amplifier) out v cc v cc+ 36 pf 37 pf 14 pf 7 pf 15 w 460 w 15 w in+ in component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) supply voltage, v cc+ (see note 1) 22 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . supply voltage, v cc (see note 1) 22 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage, either input (see notes 1 and 2) v cc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input current (see note 3) 10 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . duration of output short circuit (see note 4) unlimited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, q ja (see note 5): p package 85 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ps package 95 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . notes: 1. all voltage values, except differential voltages, are with respect to the midpoint between v cc+ and v cc . 2. the magnitude of the input voltage must never exceed the magnitude of the supply voltage. 3. excessive input current will flow if a differential input voltage in excess of approximately 0.6 v is applied between the inp uts unless some limiting resistance is used. 4. the output may be shorted to ground or either power supply. temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. 5. the package thermal impedance is calculated in accordance with jesd 51.
ne5532, ne5532a dual low-noise operational amplifiers slos075c november 1979 revised june 2000 3 post office box 655303 ? dallas, texas 75265 recommended operating conditions min nom max unit supply voltage, v cc+ 5 15 v supply voltage, v cc 5 15 v operating free-air temperature 0 70 c electrical characteristics, v cc = +15 v, t a = 25 c (unless otherwise noted) parameter test conditions 2 min typ max unit v io in p ut offset voltage v o =0 t a = 25 c 0.5 4 mv v io inp u t offset v oltage v o = 0 t a = 0 c to 70 c 5 mv i io in p ut offset current t a = 25 c 10 150 na i io inp u t offset c u rrent t a = 0 c to 70 c 200 na i ib in p ut bias current t a = 25 c 200 800 na i ib inp u t bias c u rrent t a = 0 c to 70 c 1000 na v icr common-mode input-voltage range 12 13 v v opp maximum peak-to-peak r l 600 w v cc = 15 v 24 26 v v opp output-voltage swing r l M w v cc = 18 v 30 32 v r l 600 w , t a = 25 c 15 50 a vd large-signal l , v o = 10 v t a = 0 c to 70 c 10 v/mv a vd gg differential-voltage amplification r l 2 k w , t a = 25 c 25 100 v/mv l , v o = 10 v t a = 0 c to 70 c 15 a vd small-signal differential-voltage amplification f = 10 khz 2.2 v/mv b om maximum out p ut swing bandwidth r l = 600 w , v o = 10 v 140 khz b om ma x im u m - o u tp u t - s w ing band w idth v cc = 18 v, v o = 14 v 100 kh z b 1 unity-gain bandwidth r l = 600 w , c l = 100 pf 10 mhz r i input resistance 30 300 k w z o output impedance a vd = 30 db, r l = 600 w , f = 10 khz 0.3 w cmrr common-mode rejection ratio v ic = v icr min 70 100 db k svr supply voltage rejection ratio ( d v cc / d v io ) v cc = 9 v to 15 v, v o = 0 80 100 db i os output short-circuit current 10 38 60 ma i cc total supply curent v o = 0, no load 8 16 ma crosstalk attenuation (v o1 /v o2 ) v 01 = 10 v peak, f = 1 khz 110 db 2 all characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified.
ne5532, ne5532a dual low-noise operational amplifiers slos075c november 1979 revised june 2000 4 post office box 655303 ? dallas, texas 75265 operating characteristics, v cc = 15 v, t a = 25 c parameter test conditions ne5532 ne5532a unit parameter test conditions min typ max min typ max unit sr slew rate at unity gain 9 9 v/ m s overshoot factor v i = 100 mv, r l = 600 w , a vd = 1, c l = 100 pf 10% 10% v equivalent in p ut noise voltage f = 30 hz 8 8 10 nv/ hz v n eq u i v alent inp u t noise v oltage f = 1 khz 5 5 6 n v/ h z i equivalent in p ut noise current f = 30 hz 2.7 2.7 p a/ hz i n eq u i v alent inp u t noise c u rrent f = 1 khz 0.7 0.7 pa/ hz
important notice texas instruments and its subsidiaries (ti) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. all products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. ti warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with ti's standard warranty. testing and other quality control techniques are utilized to the extent ti deems necessary to support this warranty. specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. customers are responsible for their applications using ti components. in order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. ti assumes no liability for applications assistance or customer product design. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of ti covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. ti's publication of information regarding any third party's products or services does not constitute ti's approval, warranty or endorsement thereof. copyright ? 2000, texas instruments incorporated
|
