View PS7211-2A-F3-A_7349913.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec representative for availability and additional information. ? 1996, 1999 solid state relay ocmos fet ps7211-2a 8-pin sop 100 v break down voltage 2-ch optical coupled mos fet document no. p11563ej5v0ds00 (5th edition) date published october 1999 ns cp (k) printed in japan the mark ? ? ? ? shows major revised points. description the ps7211-2a is a solid state relay containing gaas leds on the light emitting side (input side) and mos fets on the output side. it is suitable for analog signal control because of its low offset and high linearity. features ? 2 channel type (1 a + 1 a output) ? low led operating current (i f = 2 ma) ? designed for ac/dc switching line changer ? small and thin package (8-pin sop, height = 2.1 mm) ? low offset voltage ? ordering number of taping product: ps7211-2a-f3, f4 ? ul approved: file no. e72422 (s) ? bsi approved: no. 8241/8242 ? csa approved: no. ca 101391 applications ? exchange equipment ? measurement equipment ? fa/oa equipment
data sheet p11563ej5v0ds00 2 ps7211-2a package dimensions (in millimeters) 1. led anode 2. led cathode 3. led anode 4. led cathode 5. mos fet 6. mos fet 7. mos fet 8. mos fet 8765 1234 top view 9.080.5 7.00.3 4.4 0.50.3 0.05 +0.08 C0.05 0.40.3 2.05 +0.08 C0.05 2.54 0.40 +0.10 C0.05 0.25 m 0.15 +0.10 C0.05
data sheet p11563ej5v0ds00 3 ps7211-2a ordering information part number package packing style application part number *1 ps7211-2a 8-pin sop magazine case 45 pcs ps7211-2a ps7211-2a -f3 embossed tape 1 500 pcs/reel ps7211-2a -f4 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw/ch peak forward current *1 i fp 1a mos fet break down voltage v l 100 v continuous load current i l 100 ma pulse load current *2 (ac/dc connection) i lp 260 ma power dissipation p d 180 mw/ch isolation voltage *3 bv 1 500 vr.m.s. total power dissipation p t 460 mw operating ambient temperature t a - 40 to +80 c storage temperature t stg - 40 to +100 c *1 pw = 100 m s, duty cycle = 1 % *2 pw = 100 ms, 1 shot *3 ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and output
data sheet p11563ej5v0ds00 4 ps7211-2a recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 21020ma led off voltage v f 00.5v electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5.0 m a mos fet off-state leakage current i loff v d = 100 v 0.03 1.0 m a output capacitance c out v d = 0 v, f = 1 mhz 57 pf/ch coupled led on-state current i fon i l = 100 ma 2.0 ma on-state resistance r on1 i f = 10 ma, i l = 10 ma 3.4 6.0 w r on2 i f = 10 ma, i l = 100 ma, t 10 ms turn-on time *1 t on i f = 10 ma, v o = 5 v, pw 3 10 ms 0.16 1.0 ms turn-off time *1 t off 0.02 0.2 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 w isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf/ch *1 test circuit for switching time v l r l i f r in pulse input input monitor monitor v o t on t off 10 % 90 % 0 v o = 5 v 50 % output input
data sheet p11563ej5v0ds00 5 ps7211-2a typical characteristics (t a = 25 c, unless otherwise specified) C25 0 25 50 75 80 100 100 80 60 40 0 20 ambient temperature t a (?c) maximum forward current i f (ma) maximum forward current vs. ambient temperature 1 ma 5 ma 20 ma 30 ma i f = 50 ma 10 ma C25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 ambient temperature t a (?c) forward voltage v f (v) ambient temperature forward voltage vs. C25 0 25 50 75 80 100 150 100 50 0 ambient temperature t a (?c) maximum load current i l (ma) maximum load current vs. ambient temperature f = 1 mhz 20 40 60 80 120 100 125 100 75 50 0 25 applied voltage v d (v) output capacitance c out (pf) output capacitance vs. applied voltage i f = 10 ma C1.0 C0.5 0.5 1.0 0 200 100 C100 C200 load current vs. load voltage load voltage v l (v) load current i l (ma) applied voltage v d (v) off-state leakage current i loff (a) off-state leakage current vs. applied voltage 120 100 80 40 20 060 10 C8 10 C6 10 C4 10 C3 10 C7 10 C9 10 C5 25 ?c t a = 80 ?c
data sheet p11563ej5v0ds00 6 ps7211-2a 5 15 20 30 25 10 0.5 0.4 0.3 0.2 0.1 0 turn-off time vs. forward current forward current i f (ma) turn-off time t off (ms) v o = 5 v 0.02 0.04 30 20 15 10 0 5 25 turn-off time t off (ms) number (pcs) turn-off time distribution n = 50 pcs, i f = 10 ma, v o = 5 v v o = 5 v 5 15 20 25 10 30 2.5 2.0 1.5 1.0 0.5 0 turn-on time vs. forward current forward current i f (ma) turn-on time t on (ms) 0.1 0.3 0.5 0.2 0.4 30 20 15 10 0 5 25 turn-on time t on (ms) number (pcs) turn-on time distribution n = 50 pcs, i f = 10 ma, v o = 5 v normalized to 1.0 at t a = 25 ?c, i f = 10 ma, i l = 10 ma C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 ambient temperature t a (?c) normalized on-state resistance r on normalized on-state resistance vs. ambient temperature n = 50 pcs, i f = 10 ma, i l = 10 ma 3.2 3.4 3.6 3.3 3.5 30 20 15 10 0 5 25 on-state resistance distribution number (pcs) on-state resistance r on ( w )
data sheet p11563ej5v0ds00 7 ps7211-2a normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 ambient temperature t a (?c) normalized turn-on time t on normalized turn-on time vs. ambient temperature normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 ambient temperature t a (?c) normalized turn-off time t off normalized turn-off time vs. ambient temperature remark the graphs indicate nominal characteristics.
data sheet p11563ej5v0ds00 8 ps7211-2a taping specifications (in millimeters) 1.550.1 12.00.1 2.00.1 4.00.1 1.550.1 1.750.1 7.50.1 16.00.3 7.60.1 2.80.1 10.450.1 0.3 ps7211-2a-f3 ps7211-2a-f4 330 1005.0 16.4 +2.0 C0.0 13.01.0 2.00.5 21.00.8 2.5 outline and dimensions (tape) tape direction outline and dimensions (reel) packing: 1 500 pcs/reel
data sheet p11563ej5v0ds00 9 ps7211-2a recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 235 c (package surface temperature) ? time of temperature higher than 210 c 30 seconds or less ? number of reflows two ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) 60 to 120 s (preheating) 210 ?c 100 to 160 ?c package surface temperature t (?c) time (s) (heating) to 10 s to 30 s 235 ?c (peak temperature) recommended temperature profile of infrared reflow (2) dip soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? number of times one ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) (3) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. ? avoid shorting between portion of frame and leads. * * * : portion of frame
data sheet p11563ej5v0ds00 10 ps7211-2a [memo]
data sheet p11563ej5v0ds00 11 ps7211-2a [memo]
ps7211-2a caution within this device there exists gaas (gallium arsenide) material which is a harmful substance if ingested. please do not under any circumstances break the hermetic seal. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or others. descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. nec corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. while nec corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quality grades: "standard", "special", and "specific". the specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. the quality grade of nec devices is "standard" unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those specified for standard quality grade, they should contact an nec sales representative in advance. m7 98. 8

▲Up To Search▲

Price & Availability of PS7211-2A-F3-A

	To Download PS7211-2A-F3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .