specifications subject to change without notice. p apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com features high reliability. self-cleaning contacts. multi- positions. process compatible with tape seal. dual in-line .100" x .300" term. spacing. general specifications electricals electrical life 2000 cycles min. per switch @ 24 vdc, 25 ma contact rating, non-switching 100 ma at 50 vdc contact rating, switching 25 ma at 24 vdc contact resistance at current 100 ma 5 0 my max. initial - 100 my max. after life test insulation resistance at 100 vdc 100 my minimum dielectric strength 500 vac for 1 minute capacitance 5 pf. max. between adjacent terminals mechanicals, thermals mechanical life 2000 cycles min. per switch operating force 1000 grams max. vibration 10-55 hz.per mil-std-202f method 201a shock 50 g (peak value) for 11 msec. per mil-std-202f, method 213b operating temperature range -40c to 85c soldering & cleaning recommendations* hand soldering 320c max. for 2 seconds max.(30 watt iron max.) wave soldering 260c max. for 5 seconds max. cleaning (with tape seal) spray wash from top side only. * note: keep switches in ?off? position during soldering and cleaning for best results materials base & cover di: ul94v-o, glass fiber filled pbt, black dm: ul94v-o, glass fiber filled pps, black actuators ul94v-o, nylon, white contacts gold over nickel plated copper alloy terminals di: tin/lead plated brass. dm: gold over nickel plated copper alloy. term. sealing molded-in tape seal kapton packaging dip switches are shipped in standard ic tubes with all actuators in the "off" position. tape & reel packaging per eia available for dmr models (see next page). switch schematic (typical) cross sections double contact system see tabulations on following pages for di & dm number of positions available (10 shown) di & dm series spst standard dip switches p2
specifications subject to change without notice. p apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com squared terminals spread terminals model model model model no. no. no. no. no. 'a' dim. with no with with no with of +.008/-.00 0" tape seal tape seal tape seal tape seal pos. (+0.2/-0.0mm) di01h n/a di01s n/a 1 .137 (3,48) di02h n/a di02s n/a 2 .237 (6,02) di04h n/a di04s n/a 4 .437 (11.10) di06h n/a di06s n/a 6 .637 (16,18) di08h n/a di08s n/a 8 .837 (21,26) di10h n/a di10s n/a 10 1.037 (26,34) dir01h n/a dir01s dir01st 1 .137 (3,48) dir02h dir02ht dir02s dir02st 2 .237 (6,02) dir04h dir04ht dir04s dir04st 4 .437 (11,10) DIR06H DIR06Ht dir06s dir06st 6 .637 (16,18) dir08h dir08ht dir08s dir08st 8 .837 (21,26) dir10h dir10ht dir10s dir10st 10 1.037 (26,34) recessed raised actuator di series machine insertable + + + + + n/a = not available. + auto-insertable using equipment from amistar, dynapert, panasert, northeastern tool, universal and others. tin/lead plated brass terminals gold plated terminals available on request p3 dm series surface mount + + + + + model model no. no. 'a' dimension actuator with no with no. of +.008/-.000" style tape seal tape seal pos. (+0.2/-0.0mm) raised dm01 n/a 1 .137 (3,48) actuator dm02 n/a 2 .237 (6,02) dm03 n/a 3 .337 (8,56) dm04 n/a 4 .437 (11,10) dm05 n/a 5 .537 (13,64) dm06 n/a 6 .637 (16,18) dm07 n/a 7 .737 (18,72) dm08 n/a 8 .837 (21,26) dm09 n/a 9 .937 (23,80) dm10 n/a 10 1.037 (26,34) dm12 n/a 12 1.237 (31.42) recessed dmr01 n/a 1 .137 (3,48) actuator dmr02 dmr02t 2 .237 (6,02) dmr03 dmr03t 3 .337 (8,56) dmr04 dmr04t 4 .437 (11,10) dmr05 dmr05t 5 .537 (13,64) dmr06 dmr06t 6 .637 (16,18) dmr07 dmr07t 7 .737 (18,72) dmr08 dmr08t 8 .837 (21,26) dmr09 dmr09t 9 .937 (23,80) dmr10 dmr10t 10 1.037 (26,34) dmr12 dmr12t 12 1.237 (31.42) for tape & reel packaging on dmr models only, add 'tr' to model number - example: dmr08ttr. note- tape & reel packaging is available only with tape seal models. 900 switches per reel.
|
