spf series ? sip ssr ? ratings to 25a (forced air) @ 480 vac ? scr output for heavy industrial loads ? ac or dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output product selection control voltage 25a 25a 25a spf240d25 4-15 vdc spf380d25 spf480d25 15-32 vdc spfe240d25 spfe380d25 spfe480d25 18-36 vac spfe240a25 90-140 vac spf240a25 available options output specifications (1) description spf24 0 spf380 spf480 operating voltage (47-63hz) [vrms] 12-280 48-530 48-660 transient overvoltage [vpk] 600 1200 1200 maximum off-state leakage current @ rated voltage [marms] 0.1 0.1 0.1 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 maximum load current (convection air) [arms] (3) 10 10 10 maximum load current (forced air) [arms] (3) 25 25 25 minimum load current [arms] 0.06 0.06 0.06 maximum surge current (16.6ms) [apk] 250 250 250 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 1.6 maximum i2 t for fusing (8.3 msec) [a2 sec] 260 260 260 minimum power factor (with maximum load) 0.5 0.5 0.5
input specifications (1) description spf240d25 spf380d/480 d spfexxxd25 spf2 40a25 spfe240a25 control voltage range 3-15 vdc 4-15 vdc 15-32 vdc 90-140 vac 18-36 vac maximum turn on voltage 3.0 vdc 4.0 vdc 15.0 vdc 90.0 vrms 18.0 vrms minimum turn-off voltage 1.0 vdc 1.0 vdc 1.0 vdc 10.0 vrms 2.0 vrms typical input current @ nominal voltage 15 madc 15 madc 15 madc 10 madc 10 madc nominal input impedance 300 ohm 240 ohm 1500 ohm 14.1 k ohm 2.1 k ohm maximum turn-on time [msec] (4) 1/2 cycle 1/2 cycle 1/2 cycle 10 10 maximum turn-off time [msec] 1/2 cycle 1/2 cycle 1/2 cycle 40 40 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 vdc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -30 to 80 ? c ambient storage temperature range -30 to 125 ? c weight (typical) 0.85 oz. (25g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443,13.11.1 3) heatsink temperature 85 ?c maximum. 4) turn-on time for random turn-on versions 0.1 msec (dc control models) wiring diagram
mechanical specifications thermal derate information agency approvals e116950 rev. 112911
annex - enviromental information
|
