426 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. schrack catalog 1308242 issued 3-03 www.tycoelectronics.com technical support: refer to inside back cover. coil data @ 20 c voltage: 5, 6, 9, 12, 24 and 36vdc. nominal coil power: 360mw. operate coil power: 200mw. features small size for high density pc board mounting. 1 form a and 1 form c contact arrangements. creepage/clearance to vde 0435 and vde 0700. 2,500vrms dielectric strength between contact and coil. ul class f approved insulation system. low-complexity design for enhanced reliability. high-temperature version available. coil data @ 20 c initial insulation resistance between mutually insulated elements: 10 8 ohms. tracking resistance of relay base: pb1: cti 250 pb3: cti 300 insulation to vde 0110b (2/79): category c / reference voltage 250. initial dielectric strength between open contacts: 1,000vrms. between coil and contacts: 2,500vrms. surge voltage resistance between coil and contacts: 4,000vrms. clearance / creeepage distance: 3 mm / 4 mm. rated coil must must coil coil resistance operate release current voltage 10% voltage voltage (ma) (vdc) (ohms) (vdc) (vdc) 5 70 3.75 0.5 72.0 6 100 4.5 0.6 60.0 9 225 6.75 0.9 40.0 12 400 9.0 1.2 30.0 24 1,600 18.0 2.4 15.0 36 3,600 27.0 3.6 60.0 mechanical data termination: printed circuit board. enclosure: splash-resistant (unsealed) plastic case (ul flammability class v-0). weight: 0.2 oz. (5.4g). environmental data temperature range (operating): pb1 or pb3: -40 c to +85 c. pbh: -20 c to +105 c. vibration: 30 to 400 hz., 4g's, min. shock: mechanical (destruction): 30g min. protection category: ip 54 operate data @ 20 c operate/release time: 20 ms, max. (excluding bounce). bounce time: 15 ms, max. operate coil power: 200mw. contact data arrangements: 1 form a (spst-no) and 1 form c (spdt). material: silver nickel 90/10. max. switching rate: 6,000 ops./min. (minimum load). 600 ops./min. (rated load). expected mechanical life: 5 million operations. expected electrical life : pb1 &pb3 @85 c: 100,000 operations @ 6a, 240vac (no). 25,000 operations @ 10a, 240vac (no). 25,000 operations @ 10a/3a, 240vac (no/nc). 1,000 operations @ 10a/10a, 240vac (no/nc). pbh @105 c: 250,000 operations @ 2a, 240vac (no). 150,000 operations @ 5a, 240vac (no). 100,000 operations @ 6a/6a, 240vac (no/nc). maximum contact rating: pb1 &pb3: no (make) 10a / nc (break) 3a. pbh: 6a (mtg. space 3mm); 4a (dense pack). maximum switching voltage: pb1 &pb3: 250vac, 100 vdc. pbh: 250vac maximum make current (all): 15a (max. 4 sec at 10% duty cycle.) maximum breaking capacity: pb1 &pb3: 750va (nc contact) / 2,500va (no contact). pbh: 1,500va. file e214025 file 4570-4940-0042 pb series 10 amp, pc board miniature relay users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. contact life (pb1 & pb3) max. dc load breaking capacity (pb1 & pb3) coil operating range (pb1 & pb3)
427 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. schrack catalog 1308242 issued 3-03 outline dimensions wiring diagram (bottom view) suggested pc board layout (bottom view) our authorized distributors are more likely to maintain the following items in stock for immediate delivery. pb114012 pb114024 ordering information typical part number b pb 1 3 4 012 1. basic series: pb = miniature, 10a pc board relay. 2. version: 1 = standard version, cti 250 3 = high cti version, cti 300 h = high temerature (105 c) version, cti 250 3. contact arrangement: 1 = 1 form c (spdt) 3 = 1 form a (spst-no) 4. contact material: 4 = agni 90/10 4. coil input: 005 = 5vdc 006 = 6vdc 009 = 9vdc 012 = 12 vdc 024 = 24vdc 036 = 36vdc (other voltages available as special order) .59 (15.0) .59 (15.0) .787 (20.0) .59 (15.0) a1 a2 11 12 14 .295 (7.5) .05 + .004 dia. (1.3 + .1) .197 (5.0) .197 (5.0) .197 (5.0) .246 (6.25) .049 (1.25) .098 (2.5)
|
