(1/3) 001-01 / 20080413 / e533_mlp2520.fm ? all specifications are subject to change without notice. smd inductors(coils) for signal line(multilayer, magnetic shielded) mlp series mlp2520 features smd products have excellent mounting strength. the products contain no lead and also support lead-free soldering. it is a product conforming to rohs directive. applications cellular phones, dscs, dvcs, hds, etc. specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l w (3) material code (4) inductance value (5) management number (6) packaging style packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. do not expose the inductors to stray magnetic fields. avoid static electricity discharge during handling. when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?25 to +85c storage temperature range ?40 to +85c[unit of products] natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) mlp 2520 s 1r0 l t (1) (2) (3) (4) (5) (6) 2520 2.5 2.0mm 1r0 1.0 h l t=1.0mm max. t taping [reel] packaging style thickness t(mm) quantity taping 1.0mm max. 2000 pieces/reel please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 001-01 / 20080413 / e533_mlp2520.fm all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics typical electrical characteristics inductance change vs. dc superposition characteristics inductance vs. frequency characteristics part no. inductance (h) inductance tolerance test frequency (mhz) dc resistance ( ? )30% rated current (ma) thickness (mm)max. mlp2520s1r0l 1 20% 2 0.06 1500 1.0 mlp2520s1r5l 1.5 20% 2 0.07 1500 1.0 mlp2520s2r2l 2.2 20% 2 0.08 1300 1.0 mlp2520s3r3l 3.3 20% 2 0.1 1200 1.0 mlp2520s4r7l 4.7 20% 2 0.11 1100 1.0 dimensions in mm net weight : 15mg 2.50.2 0.50.3 0.50.3 2.00.2 t 2.8 1.4 2.0 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 200 400 600 800 1000 1200 dc current ( ma ) inductance ( h ) mlp2520s1r0l mlp2520s1r5l mlp2520s2r2l mlp2520s3r3l mlp2520s4r7l 1 0 6.0 5.0 3.0 2.0 1.0 4.0 10 100 1000 frequency ( mhz ) mlp2520s1r0l mlp2520s1r5l mlp2520s2r2l mlp2520s3r3l mlp2520s4r7l inductance ( h )
(3/3) 001-01 / 20080413 / e533_mlp2520.fm all specifications are subject to change without notice. packaging styles reel dimensions tape dimensions 1.0 ?178 2.0 2.0 0.5 ?13 0.5 ?21 0.8 ?60 2.0 13.0 1.4 9.0 0.3 dimensions in mm 160min. taping 200min. 300min. drawing direction dimensions in mm 8.0 0.2 3.5 0.05 3.5 0.05 1.75 0.1 1.1 0.1 2.3 0.1 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity
|
