tlsd?08?d?02.00?01?l?sr tlsd?12?d?02.00?01?l?rn1 www.samtec.com f-209-1 ?r = reversed ?m = middle reverse ?o = outside reverse 2 mm tiger beam idc cable ??xx.xx? = assembled length assembled length in inches ( 1 / 8 ") 2 inches minimum ?05, ?08, ?10, ?12, ?13, ?15, ?17, ?20, ?22, ?25 (call for other sizes) 01 02 black wire opposite position #1. reverse notch option on end 1 only. not available with ?r option. reverse notch option on end 2 only. not available with ?r option. specify ?xx? as position number. same position will be polarized on both ends. note: tlsd series assemblies are non- standard, non-returnable. ?d = double end 2" min. 4" minimum ?xx? 1/8" double row con nec tors outer most (end of as sem bly) ?d ?xx? = daisy chain ?p ?xx? = position po lar iza tion ?rw = reverse wiring ?rn1 = reverse notch end 1 ?rn2 = reverse notch end 2 ?n = notch polarization 01 02 01 02 01 02 ?s = single end tlsd = socket strip specify ?xx? as number of conductors to be broken out. ?xx? 5"max. 2"min. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. tlsd series no. pins per row end op tion other option 01 plating option length type ?l = 10" (0,25m) gold on contact area ?b ?xx? = breakout requires ?dxx requires ?dxx requires ?dxx no. of positions x (2,00) .0787 + (5,21) .205 (8,76) .345 (4,06) .160 (1,00) .039 (0,25) .010 01 02 mates with: tmm, tmmh (except ?sr), tw, mtmm, tlmm ? low cost alternative to tcsd ? 1 point of contact phosphor bronze ? strain relief for rugged applications for complete speci? cations see www.samtec.com?tlsd insulator ma te ri al: black glass filled polyester contact: phosphor bronze plating: au or sn over 50" (1,27m) ni wire: 28 awg 7/36 stranded, tinned, copper with gray pvc insulator current rating: 1a operating temp range: -40c to +105c lead size accepted: (0,48mm) .019" to (0,53mm) .021" contact re sis tance: 10 m maximum insertion depth: (3,56mm) .140" to (4,27mm) .168" insertion force: (single contact only) 2 oz. (0,56n) average withdrawal force: (single contact only) 1.4 oz (0,39n) average rohs compliant: ye s polarizing key also available specify pk-01-07 for polarizing key. also polarizes smm series socket strips. connector only (ktlsd series). call samtec. ?sr = strain relief specifications features
|
