do not scale from this print etmm-1xx-02-x-d-xx-xx no. of positions -02 thru -25 row specification -d: double (use etmm-xx-d-lc) plating specification -s: selective gold (use t-1s13-xx-s-2) -l: light selective (use t-1s13-xx-l-2) -f: flash gold selective (use t-1s13-xx-f-2) option -th: through hole (see fig. 1, sht. 1) -ra: right angle (see fig. 2, sht. 2) -sm: surface mount (see fig. 3, sht.2) body height -lc: locking clip (use lc-05-tm for through hole style, see fig. 1) (use lc-07-tm for -sm style, see fig. 3, sht. 2) not available for -ra style -tr: tape & reel (for -sm option only) -k: polyimide film pad (use k-500-300, see fig. 4, sht 3) not available with -th option -xx: pin no. to be omitted (polarized option) fig.1 etmm-115-02-x-d-th-lc shown lead style .020 ref 0.51 .177 ref 4.51 .257 ref 6.54 (no. of pos. x .0787[2.000]) + .3226[8.194] ref (no. of pos. x .0787[2.000]) + .3926[9.972] ref .0787 2.000 .0787 (typ) 2.000 .037 ref 0.94 (no. of pos. - 1) x .0787[2.000] "a" "a" c l 01 03 02 04 c l c c c designed and dimensioned in inches [millimeters] .140 ref 3.56 only for pos. -05 thru -25 .015 ref 0.38 .130 ref 3.30 .020 sq. ref 0.50 (typ) (no. of pos. x .0787[2.000]) + .3576[9.083].0030[0.076] .010 ref 0.25 (typ) (no. of pos. - 1) x .07874[2.000] 2 max sway (typ) 2 max sway (typ) c l first position indicator contact area c etmm-xx-d-lc .125 ref 3.18 .120 3.05 .302 ref 7.67 section "a"-"a" t-1s13-07-xx-2 lc-05-tm .075 1.91 .117 ref 2.97 .190 ref 4.83 2 max toe (typ) 'd' c .056 ref 1.42 detail 'd' scale 6 : 1 c c e sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [0.3] 1 .xxx: .005 [0.13] .xxxx: .0020 [0.051] material: 2mm shrouded terminal strip by: etmm-1xx-02-x-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t.newton 12/17/2007 3 1 sheet scale: 2:1 lcp insulator: lcp color: black terminal: phosphor bronze f:\dwg\misc\mktg\etmm-1xx-02-x-d-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. max pin rotation in body to be 2. 3. pushout force to be 1lb. [4.45 n] min. 4. note deleted 5. for locking clips: .75lb. [3.336 n] min retention 6. measure at bend. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision e
.0787 2.000 2 max sway (typ) "b" "b" 02 01 03 fig. 2 etmm-115-02-x-d-ra shown (different as shown, otherwise same as fig. 1) c c 04 .120 3.05 contact area .228 ref 5.79 .120 3.05 .413 ref 10.49 t-1s13-19-xx-2 in process 1 (for -ra only) .060 1.52 .0787 .005 2.00 0.13 90 2 (typ) .090 ref 2.29 section "b"-"b" t-1s13-22-x-2 t-1s13-19-xx-2 .090 2.29 .323 ref 8.20 .168 ref 4.27 in process 1 (for -sm only) t-1s13-20-xx-2 .080 2.03 ref 90 - 2 + 3 in process 2 (for -sm only) t-1s13-20-xx-2 (no. of pos. - 1) x .0787[2.000] .0787 2.000 2 max sway (typ) "c" "c" fig. 3 etmm-115-02-x-d-sm-lc shown (different as shown, otherwise same as fig. 1) 01 03 02 04 c c .120 3.05 contact area .240 6.10 (see note 6) 90 - 2 + 3 (typ) section "c"-"c" lc-07-tm c l t-1s13-20-xx-2 (see table 2) c c "a" .305 ref 7.75 .055 1.40 'e' c .056 ref 1.42 detail 'e' scale 4 : 1 .120 3.05 .571 ref 14.50 .576 ref 14.63 .070 ref 1.77 in process 2 (for -ra only) t-1s13-19-xx-2 t-1s13-22-xx-2 c c c c sheet of 2mm shrouded terminal strip by: etmm-1xx-02-x-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t.newton 12/17/2007 3 2 sheet scale: 2:1 revision e f:\dwg\misc\mktg\etmm-1xx-02-x-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"s" (see note) "r" (see note) .2953 .0050 [7.501 .127] .029 0.74 note: "r" = used measured dimension (ref) fig. 4 etmm-115-02-x-d-sm-k shown (different as shown otherwise same as fig. 1) .245 [6.22] pt-1-24-02-38 packaging all parts are loaded with position 1 toward arrow except -ra option pt-1-24-03-38 pt-1-24-01-45 "s" = {("r" - .2953[7.50]) / 2} .020[0.51] c note: all positions are to be tubed. c sheet of 2mm shrouded terminal strip by: etmm-1xx-02-x-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t.newton 12/17/2007 3 3 sheet scale: 2:1 revision e f:\dwg\misc\mktg\etmm-1xx-02-x-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
