1 catalog ds13-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 ?2004 by tyco electronics corporation. all rights reserved. cii and tyco are trademarks. ds13 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc product facts standard options: short circuit/overload protection and control status. optically coupled all solid state relay. ttl & cmos compatible input. low on-resistance power mosfet output. tested per mil-r-28750 and approved to dscc drawing 90091. all versions available with tyco electronics ??level screening for cii relays. ds13 series ssrs employ state of the art photo- voltaic optical isolation and power mosfet output chips for ultra-reliable high speed switching of dc loads up to 2 amps, with low on-resistance. standard options include integral cur- rent overload/short circuit protection and a separate input control status line. the overload feature pro- vides protection of the relay, load and load circuit wiring in the event of a sus- tained current overload or short circuit while the relay is on or when it is turned on into a short. the control status provides a built-in test function which provides a logic ??when the input circuit is energized and functional. the relay is packaged into a custom hermetically sealed low- profile 8-pin ceramic dip package, with through hole or surface mount pins. cii part no. dscc dwg. no. relay version ds13-1y 90091-008 basic relay ds13-1000 90091-004 relay w/ short circuit protection DS13-1001 90091-006 relay w/ control status ds13-1002 90091-002 relay w/ short circuit protection and control status note: add suffix ??to part number for surface mount versions. 2 terminal input configuration direct drive ttl drive 3 terminal input configuration with status without status load load r series s1 vcc control 1 2 8 4 5 return (-) output (+) output v load load return load load r series vcc control 1 2 8 4 5 return (-) output (+) output v load load return o c ttl load load vcc vso control 1 2 8 4 5 return (-) output (+) output v load load return 7 v r status status v control status output load load vcc control 1 2 8 4 5 return (-) output (+) output v load load return v control
2 ds13 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) electrical specifications (-55? to +105? unless otherwise specified) input (2 terminal configuration) input supply voltage range (vcc) 3.8 - 32 vdc (notes 1 & 2, figures 1 & 2) input current (max.) @ 5vdc 15madc (notes 1 & 2, figures 1 & 2) must turn-on voltage 3.8vdc must turn-off voltage 1.5vdc reverse voltage protection -32vdc input (3 terminal configuration) control voltage range 0 - 18 vdc control current (max.) 240?dc @ 5v, 1ma @ 18v input supply voltage range (vcc) 3.8 - 32 vdc (notes 1 & 2, figures 1 & 2) input current (max.) @ 5vdc 15madc (notes 1 & 2, figures 1 & 2) must turn-on voltage 0.3vdc must turn-off voltage 3.2vdc i/o dielectric strength (min.) 1,000v rms insulation resistance (min.) @ 500vdc 10 9 ohms capacitance (max.) 10pf output continuous load current (max.) @ 25?, without short circuit protection 2.0adc (figure 5, note 3) continuous load current (max.) @ 25?, with short circuit protection 1.0adc (figure 5, note 3) continuous load voltage (max.) 60vdc transient blocking voltage (max.) 80vdc (note 4) on resistance (max.) @ t j = 25?, i l = 100ma, with short circuit protection 0.45 ohm (note 5, figure 4) on resistance (max.) @ t j = 25?, i l = 100ma, without short circuit protection 0.22 ohm (note 5, figure 4) output voltage drop (max.), with short circuit protection 0.6vdc output voltage drop (max.), without short circuit protection 0.75vdc off-state leakage current (max.) @ 60vdc 100?dc turn-on time (max.) 1.5 ms (figure 3) turn-off time (max.) .25 ms (figure 3) dv/dt (min.) 100v / ? electrical system spike ?00vdc (note 4) junction temperature (max.) 150? thermal resistance (max.), junction to ambient 80?/w thermal resistance (max.), junction to case 20?/w status status supply voltage 30vdc status sink current (max.) @ vstatus 0.3vdc 2madc (note 7) status leakage current (max.) @ 15vdc 4?dc short circuit protection see figure 6, note 7 environmental characteristics ambient temperature range: operating: -55? to +105?. storage: -55? to +125?. vibration resistance: 100 g?, 10-3,000 hz. shock resistance: 1,500 g?, 0.5 ms pulse. constant acceleration resistance: 5,000 g?. catalog ds13-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 mechanical characteristics weight (max.): .07 oz. (2 grams) materials: case: dip, hermetically sealed, ceramic pins: gold plated
3 figure 1 - maximum input current vs. input voltage figure 2 - series resistance vs. vcc supply voltage (note 1) ds13 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) catalog ps13-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 figure 5 - temperature derating curve figure 6 - typical current trip levels figure 3 - output turn-on and turn-off timing figure 4 - on-resistance vs. temperature (note 6) input voltage, vcc (vdc) input current (ma) 18 15 12 9 6 3 0 0 51015 20 25 30 40 50 60 vcc (volts) r series (ohms) 500 1000 1500 2000 0 0 5 10 15 20 25 30 35 0.0 0.5 1.0 2.0 1.5 -55 15 25 35 45 55 65 75 85 95 105 115 125 load current (amps) ambient temperature ( c) ds13-1y DS13-1001 ds13-1000 ds13-1002 5 4 3 2 1 0 0.1 0.01 1 10 100 1000 surge current (amps) time (seconds) -55 c +25 c +105 c pin 4-5 high low off on t t on off 90% 10% v v control output pin 2 junction temperature ( c) normalized on resistance factor (nf) 25 50 75 100 125 0.2 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 2.0
4 ds13-tbd?df?rg?-04 ds13 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 notes 1.2 terminal input configuration is compatible with cmos or open collector ttl (with pull-up resistor). for vcc levels above 6v dc, a series limiting resistor is required. see fig. 2 for resistor value. use standard resistor value equal to or less than value form the curve. 2.vcc = 5vdc for all tests unless otherwise specified. 3.all ds13 series relays may drive loads connected to either positive or negative referenced power supply lines. reversing pola rity of output may cause permanent damage. inductive loads must be diode suppressed. 4.transient blocking voltage & electrical system spike tests are performed per mil-std-704 (28vdc systems). 5.to determine the maximum on-resistance at any given junction temperature, multiply on-resistance at 25? by normalized on-res istance factor from curve (fig. 4). 6.overload testing per mil-r-28750 is constrained to the limits imposed by the short circuit protection requirements of this sp ecification and dscc drawing 90091. load circuit series inductance for ?oad shorted?mode of operation to be limited to 50mh max. maximum repetition rate into a s horted load should not exceed 10 hz. to calculate maximum on-resistance at any temperature, use the following equation: r(on) = r(on) @ 25? x nf (without short circuit protection) and r(on) = 0.2 x nf + .21 (with short circuit protection) where nf = normalized on-resistance factor from fig. 4. 7.proper operation of the status feedback requires a status pull-up resistor. select the status resistor such that it limits st atus output current to 2ma: r status = v status ?0.3v / 2ma. figure 7 - outline dimensions through-hole mount version surface mount version 4 2 1 5 7 8 side index mark for pin 1 top index mark for pin 1 6 pls top index mark for pin 1 side index mark for pin 1 87 5 12 4 .395 max. (10.03) .560 max. (14.22) .400 .015 (10.16 .38) .010 .002 (.25 .05) .560 max. (14.22) .395 max. (10.03) .155 max. (3.94) .155 max. (3.94) .435 max. (11.05) .485 +.010, ?005 (12.32 +.25, ?13) .010 .002 (.25 .05) 6 pls .036 +.010, ?005 (.91 +.25, ?13) 6 pls .018 .002 (.46 .05) 6 pls .025 (.64) 6 pls .125 (3.18) .100 (2.54) .300 (7.62) .125 (3.18) .100 (2.54) .300 (7.62) .018 .002 (.46 .05) 6 pls .016 +.010, ?005 (.41 +.25, ?13) 6 pls .150 .015 (3.81 .38) 6 pls
|
