caps for plug 8011- 0076 c 8011 series souriau description ? connector fully compatible with all the existing st* connectors ? low insertion loss ? bayonet coupling ? repeatable performances (plug indexing) ? different types of fibres and cables available ? jumpers and active device housings can be supplied regarding customer require- ment characteristics performances : ? insertion loss : mean value < 0,3 db ? standard deviation < 0,15 db (at : 850 nm with a 62,5/125 fiber) ? temperature range - 20 c to + 70 c (ceramic and composite ferule) - 40 c to + 85 c (metallic ferule) ? loss repeat < 0,1 db for 500 reconnections ? cabling time per connector : 15 mn/1 5 mn/12 ? retention force cable/plug > 100 n materials : plug series ferule nut and body 8011-12 ceramic 8011-13 composite ni plated polymer zamack 8011-15 metallic ? boot : tefabloc coupler alignement body sleeve 8011-22 bronze ni plated zamack applications lan datacom network computer link computer industrial link standards st* compatible iec 86 b packaging size - unit (for plug 8011 15 r 063 only) d- per 10 pieces (for plugs and couplers) c- per 100 pieces (for couplers and caps) cable type plug maximum admissible cable diameter 61 - cable ? 1,5 mm 62 - cable ? 2,2 mm (plastic fiber ? 1000 ) 63 - cable ? 2,4 mm to ? 3 mm 80 - multi cable ? 1,1 mm hole adaptors ? 1,6 mm ? 3 mm for other cables diameters or adaptorsor spare, consult us coupler and device housing 01 plugs 0- crimping cleaving t echnic (r type fibre only), or crimping polishing technic ( j type fibre only) 1- gluing/polishing technic (g, h, and r fibre types) coupler and device housing - leave blank fibre type g- 50/125 - 62,5/125 available in series 12/13 h- 100/140/500 r- 200/230/500 - hcs available in series 15 j- 1000 plastic fibre z- for thru bulkhead coupler or device housing other fibres consult us plugs 12 - ceramic probe (zirconia) 13 - high precision composite polymer probe 15 - rust proof material probe (arcap) coupler 22 - thru bulkhead device housing 62 basic series 8011 15 r 1 63 ordering information } } 444
8011 series souriau fibre termination technology ? gluing/polishing for fibre types g, h, r ? crimping/polishing for fibre type j ? crimping/cleaving for fibre type r (field cabling) tool kit p/n : 80-mg0011 the tool kit contains all necessary tools to terminate st* plugs in gluing/polishing technic (stripping tools for cable and fibre, crimping tool, ...) tool kit p/n : 80-mf0002 the tool kit contains all necessary tools required to terminate st* plugs in crimping/cleaving technic, particularly used in case of field cabling nb : available for hcs 200/230/500 fiber into ? 2,6 mm cable only tool kit p/n : 80-ms0003 the tool kit contains all necessary tools to terminate st* plugs for plastic fibre, such as : ? stripping plier ? crimping tool ? polishing tool table of available p/n : ? plugs : 8011 12 g 163d 8011 12 g 180d 8011 13 g 163d 8011 13 g 180d 8011 15 h 161d 8011 15 h 163d 8011 15 r 063 8011 15 r 163d 8011 15 j 062d ? couplers : 8011 22 z 01d 8011 22 z 01c consumable the consumable kit contains all necessary materials to terminate about so plugs such as : ? polishing disks ? glue ? syringes and needles ? ethanol ? dry air canned ? miscellaneous for industrial and aeronautical p/n : 80-kg0009 applications (-40 to +85c) for datacom applications p/n : 80-kg0012 (-20 to + 70c) cleaning kit p/n : 80-kn0002 the cleaning kit contains all necessary items to clean either plugs, couplers or device housings, such as : ? ecological cleaning spray ? dry air canned ? ethanol ? paper sticks ? cleaning paper options can be ordered separately for tool kits 80-mg0011 and 80-ms0003 : ? microscope/high magnification (x 200) p/n : 80-wl0007 (x 400) p/n : 80-wl0001 ? st* adaptor for microscope p/n : 80-wl0002 * st is an at & t registered trade mark 445
|
