3.96mm pitch/disconnectable crimp style connectors vh connector high box type ? ? ? ? y y ? ? ? ? ? ? ? ? ? svh-21t-p1.1 *svh-41t-p1.1
material and finish model no. applicable wire q'ty / reel mm 2 awg# insulation o.d. (mm) phosphor bronze, tin-plated (reflow treatment) header for 3.96mm pitch vh connector for use specifically with resin coated ("potted") pc boards. ?interchangeability specifications ?current rating: 7a ac, dc (awg #18) 10a ac, dc (awg #16)/1 circuit only ?voltage rating: 250v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/10m ? max. after environmental testing/20m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 1,500v ac/minute ?applicable wire: awg #22 to #16 ?applicable pc board thickness: 1.6mm note: do not branch in parallel current which exceeds the rated current. if branched in parallel,current imbalance or other problems may develop. if it is absolutely necessary to branch such a large current in parallel, be sure to use contacts made of phosphor bronze. design the circuits without causing imbalance and provide an extra margin for each circuit. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 r75122 note: 1.tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guide line. contact jst for details. 1 circuit 2 to 8 circuits rohs compliance note: 1. *the current rating when combining with 1 circuit is 10a ac, dc (awg #16.) 2. contact jst for brass product. contact pc board layout (viewed from soldering side) and assembly layout 1 contact crimp applicator dies crimp applicator with dies applicator crimping machine svh-41t-p1.1 " 1 , / . , 4 - . , 4 7 ) " 1 - . , 4 7 ) contact crimp applicator dies crimp applicator with dies applicator crimping machine svh-21t-p1.1 " 1 , / . , 4 - . , 4 4 $ . , 4 7 ) 4 $ 4 7 ) " 1 - . , 4 7 ) " 1 - 4 $ 4 7 ) note: *strip-crimp applicator
) + 4 5 " # ?
? vhr-1n vhr-2n vhr-3n vhr-4n vhr-5n vhr-6n vhr-7n vhr-8n ? ? vhrr-3n ? vhrr-5n ? vhrr-7n vhrr-8n cir- cuits model no. dimensions (mm) q'ty / bag n type retainer mountable type # " # " 1 circuit n type 2 to 8 circuits n type retainer mountable type " 2 3 5 7 8 9 vhs-2v vhs-3v vhs-5v vhs-7v vhs-8v vhs-9v a 3.70 7.52 15.44 23.36 27.32 31.28 1,000 1,000 1,000 1,000 1,000 1,000 circuits model no. q'ty / bag material glass-filled pa 66, ul94v-0, natural (ivory) ? # " bh1p-vh-1 circuits model no. material and finish with a boss q'ty / box post: brass, copper-undercoated, tin-plated (reflow treatment) wafer: pa 66, ul-94v-0, natural (white) " # BH2P-VH-1 bh3p-vh-1 bh4p-vh-1 bh5p-vh-1 bh6p-vh-1 bh7p-vh-1 bh8p-vh-1 circuits model no. dimensions (mm) material and finish with a boss q'ty / box post: brass, copper-undercoated, tin-plated (reflow treatment) wafer: glass-filled pa 66, ul-94v-0, natural (ivory) vh connector high box type material pa 6, ul94v-0, natural (white) rohs compliance note: *marked products are not tu v approved. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. vhr-2n-oo - (blank)?atural (white) bk?lack r?ed bl?lue m?reen rohs compliance note: not tu v approved. with a boss 2 to 8 circuits with a boss 1 circuit rohs compliance this product displays (lf)(sn) on a label. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. BH2P-VH-1-oo - (blank)?atural (ivory) bk?lack r?ed bl?lue m?reen rohs compliance this product displays (lf)(sn) on a label. note: not tu v approved. housing retainer shrouded header 2
|