View PS7214-1A-E3_7016979.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec representative for availability and additional information. ? 1999, 2000 4-pin sop, 1.0 w w w w low on-state resistance 1-ch optical coupled mos fet document no. p14572ej4v0ds00 (4th edition) date published october 2000 ns cp(k) printed in japan solid state relay ocmos fet ps7214-1a the mark ? ? ? ? shows major revised points. description the ps7214-1a is a low on-state resistance solid state relay containing a gaas led on the input side and mos fets on the output side. it is suitable for plc, etc. because of its large continuous load current and low on-state resistance. features ? low on-state resistance (r on = 1.0 w typ.) ? large continuous load current (i l = 400 ma) ? 1 channel type (1 a output) ? designed for ac/dc switching line changer ? small and thin package (4-pin sop, height = 2.1 mm) ? high isolation voltage (bv = 1 500 vr.m.s.) ? low offset voltage ? ordering number of taping product: PS7214-1A-E3, e4, f3, f4 applications ? measurement equipment ? fa equipment
data sheet p14572ej4v0ds00 2 ps7214-1a package dimensions (unit: mm) 43 12 top view 4.4 7.00.3 0.50.3 0.15 +0.10 C0.05 2.54 4.00.5 0.05 +0.08 C0.05 2.05 +0.08 C0.05 0.40 +0.10 C0.05 0.25 m 1. led anode 2. led cathode 3. mos fet 4. mos fet
data sheet p14572ej4v0ds00 3 ps7214-1a ordering information part number package packing style application part number *1 ps7214-1a 4-pin sop magazine case 100 pcs ps7214-1a PS7214-1A-E3 embossed tape 900 pcs/reel ps7214-1a-e4 ps7214-1a-f3 embossed tape 3 500 pcs/reel ps7214-1a-f4 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1a mos fet break down voltage v l 100 v continuous load current i l 400 ma pulse load current *2 (ac/dc connection) i lp 0.8 a power dissipation p d 300 mw isolation voltage *3 bv 1 500 vr.m.s. total power dissipation p t 350 mw operating ambient temperature t a - 40 to +85 c storage temperature t stg - 40 to +100 c *1 pw = 100 m s, duty cycle = 1 % *2 pw = 100 ms, 1 shot *3 ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and output
data sheet p14572ej4v0ds00 4 ps7214-1a recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 21020ma led off voltage v f 00.5v electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5.0 m a off-state leakage current i loff v d = 100 v 1.0 m a mos fet output capacitance c out v d = 0 v, f = 1 mhz 120 pf coupled led on-state current i fon i l = 400 ma 2.0 ma on-state resistance r on i f = 10 ma, i l = 400 ma, t 10 ms 1.0 1.2 w turn-on time *1 t on i f = 10 ma, v o = 5 v, r l = 500 w ,1.32.0ms turn-off time *1 t off pw 3 10 ms 0.1 1.0 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 w isolation capacitance c i-o v = 0 v, f = 1 mhz 0.5 pf *1 test circuit for switching time v l r l i f r in pulse input input monitor monitor v o t on t off 10 % 90 % 0 v o = 5 v 50 % output input
data sheet p14572ej4v0ds00 5 ps7214-1a typical characteristics (t a = 25 c, unless otherwise specified) 100 85 75 50 25 0 C25 20 60 80 100 40 0 maximum forward current i f (ma) ambient temperature t a (?c) maximum forward current vs. ambient temperature output capacitance vs. output capacitance c out (pf) applied voltage v d (v) maximum load current i l (ma) ambient temperature t a (?c) maximum load current vs. ambient temperature applied voltage i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 100 0 C25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 forward voltage v f (v) off-state leakage current i loff (a) ambient temperature t a (?c) ambient temperature t a (?c) ambient temperature forward voltage vs. 100 85 75 0 C25 50 25 400 600 200 0 load current vs. load voltage load current i l (ma) load voltage v l (v) off-state leakage current vs. ambient temperature f = 1 mhz 10 20 30 40 50 60 200 0 150 100 50 C0.8 C0.4 0.8 0.4 C200 C600 C400 200 600 400 i f = 10 ma, i l = 400 ma 0 10 C6 10 C11 10 C8 10 C7 10 C9 10 C10 020406080 v d = 100 v
data sheet p14572ej4v0ds00 6 ps7214-1a normalized to 1.0 at t a = 25 ?c, i f = 10 ma, i l = 400 ma normalized on-state resistance r on ambient temperature t a (?c) normalized on-state resistance vs. ambient temperature on-state resistance distribution number (pcs) on-state resistance r on ( w ) n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 w n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 w number (pcs) turn-off time t off (ms) turn-off time distribution number (pcs) turn-on time t on (ms) turn-on time distribution turn-on time t on (ms) forward current i f (ma) turn-on time vs. forward current turn-off time t off (ms) forward current i f (ma) turn-off time vs. forward current v o = 5 v, r l = 500 w v o = 5 v, r l = 500 w 0.5 1.5 2.0 3.0 1.0 2.5 0.0 100 75 50 25 C25 0 0.8 1.0 1.2 0 5 10 15 20 25 30 30 25 20 15 10 5 1.0 3.0 4.0 6.0 2.0 5.0 0 30 25 20 15 10 5 0.05 0.15 0.20 0.30 0.10 0.25 0 0.08 0.12 0 5 10 15 20 25 30 1.3 1.5 0 5 10 15 20 25 30 n = 50 pcs, i f = 10 ma, i l = 400 ma, t 10 ms
data sheet p14572ej4v0ds00 7 ps7214-1a normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v, r l = 500 w normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v, r l = 500 w normalized turn-on time t on ambient temperature t a (?c) normalized turn-on time vs. ambient temperature normalized turn-off time t off ambient temperature t a (?c) normalized turn-off time vs. ambient temperature 100 0 C25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 100 0 C25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 remark the graphs indicate nominal characteristics.
data sheet p14572ej4v0ds00 8 ps7214-1a taping specifications (in millimeters) 1.550.1 2.00.1 4.00.1 1.550.1 1.750.1 5.50.1 12.00.2 4.60.1 2.40.1 7.40.1 0.3 8.00.1 PS7214-1A-E3 ps7214-1a-e4 180 60 13.00.5 21.00.8 13.01.0 2.00.5 13.00.5 15? 15? 2.0 outline and dimensions (tape) tape direction outline and dimensions (reel) packing: 900 pcs/reel
data sheet p14572ej4v0ds00 9 ps7214-1a 1.550.1 2.00.1 4.00.1 1.550.1 1.750.1 5.50.1 12.00.2 4.60.1 2.40.1 7.40.1 0.3 8.00.1 ps7214-1a-f3 ps7214-1a-f4 12.4 +2.0 C0.0 1.5 805.0 f 13.00.5 f 330 f 1.50.5 2.00.5 6.01 1 2 0 ? 6 0 ? 21.00.8 f outline and dimensions (tape) tape direction outline and dimensions (reel) packing: 3 500 pcs/reel
data sheet p14572ej4v0ds00 10 ps7214-1a recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 235 c or below (package surface temperature) ? time of temperature higher than 210 c 30 seconds or less ? number of reflows two ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) 60 to 120 s (preheating) 210 ?c 100 to 160 ?c package surface temperature t (?c) time (s) (heating) to 10 s to 30 s 235 ?c (peak temperature) recommended temperature profile of infrared reflow (2) dip soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? number of times one ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) (3) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet p14572ej4v0ds00 11 ps7214-1a [memo]
ps7214-1a caution within this device there exists gaas (gallium arsenide) material which is a harmful substance if ingested. please do not under any circumstances break the hermetic seal. m8e 00. 4 the information in this document is current as of october, 2000. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).

▲Up To Search▲

Price & Availability of PS7214-1A-E3

	To Download PS7214-1A-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .