24 axk(5/6)f socket and header are mated socket header features 1. the connector is a two-piece structure and 0.5mm pitch. the product lineup consists of the mated height of 1.5mm, 2.0mm and 2.5mm. 2. the socket and header has the same dropping shock and torsion resistant construction as the bellows-type contact. 3. simple lock mechanism is employed which is suitable for fpc connection. 4. mating length 0.55mm while achieving a low pro?e of 1.5mm between pcbs, the effective mating length has been extended to ensure that there is some latitude in the mating. since the contact is formed by bending thin plate, it has a spring-like quality. this construction helps make it resistant to dropping and twisting. the roll surfaces are in contact with each other, providing high contact reliability. simple lock mechanism 0.55mm 5. terminal construction prevents solder creeping and bridging. applications cellular phones phs portable data terminals compact portable devices 1.5mm pcb narrow-pitch connectors p5kf fpc reinforcing plate before mating ideal for board-to-fpc connections after mating the simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single-action insertion on the pcb. this enables the number of pins to be doubled white the size remains the same as that for existing fpc connectors. this, in turn, contributes to making products and equipment more compact. specifications 1. characteristics item speci cations conditions electrical characteristics rated current 0.5a/contact (max. 10 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 minute detection current: 1ma insulation resistance min. 1,000m ? (initial) using 500v dc megger contact resistance max. 90m ? measured based on the hp4338b measurement method of jis c 5402 mechanical characteristics composite insertion force max. 0.981n {100gf}/contacts contacts (initial) composite removal force min. 0.0588n {6gf}/contacts contacts post holding force min. 0.981n {100gf}/contact measures the maximum load in the post axial direction until removal environmental characteristics ambient temperature 55 c to +85 c no freezing at low temperatures soldering heat resistance max. peak temperature of 245 c infrared re ow soldering 300 c within 5 seconds soldering iron thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 90m ? humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 402 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 352 c, saltwarter concentration 51% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 90m ? bath temperature 402 c, gas concentration 31 ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/ hours unit weight mated height 1.5mm, 20 contacts; socket: 0.06g header: 0.04g narrow-pitch connectors for board-to-board connection narrow pitch (0.5mm) connectors p5 series p5kf sequence temperature ( c) time (minutes) 1 55 30 2 25 max. 5 385 30 4 25 max. 5 + 0 ? 3 + 10 ? 5 + 3 ? 0 + 10 ? 5 p5kf.fm 24 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@???o?p?p???t?w?a
25 axk(5/6)f 2. material and surface treatment product types part name material surface treatment molded portion heat-resistant resin (ul94v-0) contact/post copper alloy contact portion: terminal portion: au plating over ni au plating over ni (except for thick of terminal) mated height no. of contacts part no. packing socket header inner carton (1-reel) outer carton 1.5 mm 10 axk5f10345yj axk6f10345yj note) asterisk mark on end of part no.; j: 2,000 pieces (recommendation) note) asterisk mark on end of part no.; j: 4,000 pieces (recommendation) 12 axk5f12345yj axk6f12345yj 14 axk5f14345yj axk6f14345yj 16 axk5f16345yj axk6f16345yj 20 axk5f20345yj axk6f20345yj 22 axk5f22345yj axk6f22345yj 24 axk5f24345yj axk6f24345yj 26 axk5f26345yj axk6f26345yj 30 axk5f30345yj axk6f30345yj 32 axk5f32345yj axk6f32345yj 34 axk5f34345yj axk6f34345yj 40 axk5f40345yj axk6f40345yj 50 axk5f50345yj axk6f50345yj 60 axk5f60345yj axk6f60345yj 70 axk5f70345yj axk6f70345yj 80 axk5f80345yj axk6f80345yj 2.0 mm 10 axk5f10545yj axk6f10345yj 12 axk5f12545yj axk6f12345yj 14 axk5f14545yj axk6f14345yj 16 axk5f16545yj axk6f16345yj 18 axk5f18545yj axk6f18345yj 20 axk5f20545yj axk6f20345yj 22 axk5f22545yj axk6f22345yj 24 axk5f24545yj axk6f24345yj 30 axk5f30545yj axk6f30345yj 34 axk5f34545yj axk6f34345yj 40 axk5f40545yj axk6f40345yj 50 axk5f50545yj axk6f50345yj 60 axk5f60545yj axk6f60345yj 70 axk5f70545yj axk6f70345yj 80 axk5f80545yj axk6f80345yj 100 axk5f00545yj axk6f00345yj 2.5 mm 10 axk5f10545yj axk6f10545yj 12 axk5f12545yj axk6f12545yj 14 axk5f14545yj AXK6F14545YJ 16 axk5f16545yj axk6f16545yj 20 axk5f20545yj axk6f20545yj 22 axk5f22545yj axk6f22545yj 24 axk5f24545yj axk6f24545yj 30 axk5f30545yj axk6f30545yj 34 axk5f34545yj axk6f34545yj 40 axk5f40545yj axk6f40545yj 50 axk5f50545yj axk6f50545yj 60 axk5f60545yj axk6f60545yj 70 axk5f70545yj axk6f70545yj 80 axk5f80545yj axk6f80545yj 100 axk5f00545yj axk6f00545yj notes) 1. in order to reduce the amount of packaging materials used to help protect the global environment, it is recommended tha t each packaging box contain 2,000 units with the j product number suf x. embossed tape packages containing 1,000 units in the inner carton (1-reel) are also available. the latter have the p product number suf x. when placing orders, change the j suf x to the suf x p. 2. regarding ordering units, during production: please make orders in 1-reel units. samples for mounting con rmation: please consult us. (see regarding sample orders to con rm proper mounting on page 9.) samples: small lot orders are possible. change the suf x j to the suf x p. 3. the standard type comes with no positioning bosses. connectors with positioning bosses are available for on-demand production . for this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. mated height 1.5mm, 10 contacts for sockets: axk5f1033 5yj 4. the 11th digit y in the socket/header part number indicates the connector has a v-notch. (for details, please consult one of our sales of ces.) p5kf.fm 25 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@???o?p?p???t?w?a
26 axk(5/6)f dimensions socket (mated height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 40 13.00 9.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 mm general tolerance 0.2 c 0.20 0.03 0.50 0.05 0.50 0.05 0.10 ( 0.80 ) ( 0.80 ) 0.12 0.03 1.70 (suction face) 4.80 b 0.1 a 4.20 5.80 note) p5k series (mated heights: 3 mm and 3.5 mm) and the p5ks series (mated heights: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7 mm, 8 mm, and 9 mm) cannot be mated to this type. mated height c 1.5 mm 1.35 2.0 mm, 2.5 mm 1.85 header (mated height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 40 13.00 9.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 note) p5k series (mated heights: 3 mm and 3.5 mm) and the p5ks series (mated heights: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7 mm, 8 mm, and 9 mm) cannot be mated to this type. mated height c 1.5 mm, 2.0 mm 1.25 2.5 mm 1.75 socket and header are mated mated height: 1.5 mm mated height: 2.0 mm mated height: 2.5 mm 1.50 0.15 2.00 0.15 2.50 0.15 embossed tape dimensions please refer to page 64. 0.96 (suction face) 0.12 0.03 2.50 c 0.20 0.03 0.50 0.05 0.50 0.05 0.10 b 0.1 a ( 0.75 ) ( 0.75 ) 1.80 3.30 p5kf.fm 26 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@???o?p?p???t?w?a
27 axk(5/6)f notes 1. as shown below, excess force during insertion may result in damage to the connector or removal of the solder. please be careful. also, to prevent connector damage plese con?m the correct position before mating connectors. 2. keep the pc board warp no more than 0.03 mm in relation to the overall length of the connector. 3. pc boards and recommended metal mask patterns connectors are mounted with high density, with a pitch interval of 0.4 to 0.5 mm. it is therefore necessary to make sure that the right levels of solder are used, in order to reduce solder bridge and other issues. the gures to the right are recommended metal mask patterns. please use them as a reference. socket recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 m (opening area ratio: 56%) recommended metal mask pattern metal mask thickness: here, 120 m (opening area ratio: 69%) header recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 m (opening area ratio: 58%) recommended metal mask pattern metal mask thickness: here, 120 m (opening area ratio: 72%) max. 0.03mm max. 0.03mm b 0.05 0.25 0.05 0.05 4.00 6.80 0.05 0.125 0.05 0.30 0.05 0.05 0.50 0.50 0.05 0.23 0.01 0.50 0.01 0.50 0.01 6.80 0.01 5.10 0.01 (0.85) (0.85) b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.70 0.01 6.80 0.01 (1.05) (1.05) b 0.01 0.125 0.05 0.30 0.05 b 0.05 0.25 0.05 0.50 0.05 0.05 0.50 1.60 0.05 4.30 0.05 0.23 0.01 0.50 0.01 0.50 0.01 4.30 0.01 (0.85) (0.85) 2.60 0.01 b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.30 0.01 (1.05) 2.20 0.01 (1.05) b 0.01 * see the dimension table on page 18 for more information on the b dimension of the socket and header. regarding general notes, please refer to pages 8 and 9. p5kf.fm 27 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@???o?p?p???t?w?a
|
