features accepts pots lines & coaxial protector manufactured from high-impact resistant, ultraviolet-desensitized, ame retardant plastic optional sealed switching jacks with insulation displacement connectors (idc) subscriber lockable with telco override convenient ground attachment listed per ul 497 (file: e53117) how to order 7004c series - network interface device speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. bourns model 7004c nid provides a secure and weather resistant enclosure for telco service for residential or commercial installations. the 7004c supplies station protection and test access points and can be con gured for a maximum of two pots lin es and one 1740-xx coax protector. the 7004c features convenient cable knockouts and generous working space for wire management. 7004c - 0x - x x - xx model number designator number of twisted pairs 0 = none 1 = one 2 = two station protector options d 1 = 455hs-msp (2377-45-hs) voice/data/dsl (ul,cul) u 3 = 455hs-msp (2377-45-hs-idc) voice/dsl/data (ul,cul) z 1 = 455hs-bc* (2377-45-bc) balance-sensitive dsl (ul, cul) w 3 = 455hs-bc* (2377-45-bc-idc) balance-sensitive dsl (ul, cul) v 3 = 455-msp-tbu (2377-45-hs-tbu) msp w/tbu protector (ul, cul) q 3 = 455bc-msp-tbu* (2377-45-bc-tbu) balance-sensitive msp w/tbu protector (ul, cul) e 2 = 155hs-msp (2378-35-hs) voice/dsl/data (ul, cul) y 2 = 155hs-bc* (2378-35-bc) balance-sensitive dsl (ul, cul) g = 155g (2378-35-g) balanced gdt, no back-up-gap (ul, cul) k = 356g (2377-35-g) balanced gdt, no back-up-gap (ul, cul) r 3 = 356g (2377-35-g-idc) balanced gdt, no back-up-gap (ul, cul) t = tii355m o = no station protectors (not available with dsl con gurations) *for dsl systems requiring capacitive balance within 1 pf. note 1 = digi.guard - 356 size, rus maximum duty. note 2 = digi.guard ii - 125 size, rus heavy duty. note 3 = insulation displacement connectors (idc) special options h = security screw in security plate i = expansion bridge w/idc (85122-idc) s = sealed switching jack w/idc (85122-t-idc) o = no options (standard 85122 jack) f = sealed switching jack 4-post (85122-t4) n = 90 ?f-connector (85901) b = expansion bridge w/binding posts (85122-b) coax protector options 15 = 1740-15 (150 v?0 % dc breakdown @ 100 v/sec) 23 = 1740-23 (230 v?0 % dc breakdown @ 100 v/sec) 35 = 1740-35 (350 v?0 % dc breakdown @ 100 v/sec) to add lines, use station protector + 85122 standard jack 85122-t4 sealed switching jack, 4-post 85122-t-idc sealed switching jack w/idc
rj11 subscriber bridges expansion bridges 85122 standard loop 85122-t4* internal switch - 4 lugs 85122-idc insulation displacement connectors 85122-b binding post *includes environmental sealant and closed-cell foam gasket. installation diagrams product dimensions high wide deep 190.5 (7.5) 195.6 (7.7) 69 (2.7) 12 t r t r t r t r 34 rev. e 11/12 speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. 7004c series - network interface device 85122-idc* sealed switch jack w/idc dimensions: mm (inches) to ground
|