mcmx series ? sip ssr ? ratings to 5a @ 60 vdc, 10a @ 60 vdc and 6a @ 100 vdc ? mosfet output ? dc control ? low on-state impedance product selection control voltage 5a 6a 10a 3-10 vdc mcmx60d5 mcmx100d6 mcmx60d10 output specifications (1)(3) description operating voltage [vdc] 0-60 0-100 0-60 maximum off-state leakage current @ rated voltage [adc] 100 100 100 (4) maximum load current [arms] 5 6 10 minimum load current [arms] 0 0 0 maximum on-state resistence [ohm] (2) .10 .040 .018 maximum surge current (10msec) [apk] 60 100 100 maximum on-state voltage drop @ rated current [vdc] 0.5 0.24 0.18 input specifications (1) description control voltage range 3.0-10.0 vdc must turn on voltage 3.0 vdc must turn off voltage 1 .0 vdc typycal input current @ 5 vdc 15 madc nominal input impedance 300 ohm maximum turn-on time [msec] 1.0 maximum turn-off time [sec] 300 general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 2500 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 15 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 125c weight (typical) 0.7 oz. (20g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c unless otherwise noted. 2) dielectric and insulation resistance are measured between input and output. 3) inductive loads should be diode suppressed. 4) at 55 vdc.
mechanical specifications thermal derate information agency approvals ul/ cul e116950 (6 and 10a models only) rev. 120210
annex - enviromental information
|