View S-882136AMH-M2L-TF_6912258.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev.1.1 _00 voltage regulation step-up charge pump dc-dc converter s-8821 series seiko instruments inc. 1 the s-8821 series is a cmos step-up charge pump dc-dc converter with a voltage regulation function. the s-8821 series consists of an oscillation circuit, a controller, a reference voltage circuit, an error amplifier circuit, and an output switching transistor, and can regulate the output voltage by pfm control. since small ceramic capacitors can be used for the pump capacitor, input capacitor, and output capacitor, the mounting area can be minimized. ? features ? step-up pfm control cmos charge pump ? power supply voltage: 1.6 to 5.0 v ? output voltage: 2.5 to 5.5 v, selectable in 0.1 v steps. ? output voltage accuracy: 2 % max. ? built-in soft start circuit: 1.0 ms typ. ? output current 25 ma (v in =(v out(s) 0.80) v) ? oscillation frequency: 1.0 mhz typ. ? on/off function: during standby: 1 a max. ? ultra-small package: sot-23-6w, 6-pin snb(b), 6-pin son(a) ? applications ? lithium ion battery driven applications ? local power supply ? power supply for white led display backlights ? packages drawing code package name package tape reel sot-23-6w mp006-b mp006-b mp006-b 6-pin snb(b) bd006-a bd006-a bd006-a 6-pin son(a) pb006-a pb006-a pb006-a
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 2 ? block diagram vin switch control circuit sw1 sw 2 sw 3 sw 4 c + c ? c pump =0.10 f soft start circuit on/off circuit on/off pfm control oscillator circuit (1.0 mhz) reference voltage + - vout gnd c out =10 f r s r f c in =4.7 f figure 1
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 3 ? selection guide ? the output voltage and packages for the s-8821 series can be selected at the user?s request. refer to the ?product name selection guide? for the meanings of the characters in the product name and ?product name list? for the full product names. 1. product name selection guide s-8821 xx a xx ? xxx ? tf ic direction in tape specifications *1 product name (abbreviation) *2 package name (abbreviation) mh: sot-23-6w bd: 6-pin snb(b) pb: 6-pin son(a) output voltage 25 to 55 (e.g., when the output voltage is 2.5 v, it is expressed as 25.) *1. refer to the taping specifications at the end of this book. *2. refer to the product name list. 2. product name list table 1 output voltage sot-23-6w 6-pin snb(b) 6-pin son(a) 3.0 v s-882130amh-m2f-tf s-882130abd-m2f-tf s-882130apb-m2f-tf 3.3 v s-882133amh-m2i-tf s-882133abd-m2i-tf s-882133apb-m2i-tf 3.6 v S-882136AMH-M2L-TF D D 4.5 v s-882145amh-m2u-tf D D 5.0 v s-882150amh-m2z-tf s-882150abd-m2z-tf s-882150apb-m2z-tf 5.5 v s-882155amh-m3e-tf D D remark contact the sii sales department for prod ucts with an output voltage other than those specified above.
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 4 ? pin configurations table 2 pin no. symbol pin description 1 vin voltage input pin 2 c + charge-pump pump capacitor connection pin (positive pin) 3 c ? charge-pump pump capacitor connection pin (negative pin) 4 on/off shutdown pin high level (h) : normal operation (step-up) low level (l) : step-up halt (all circuit halt) 5 gnd gnd pin 6 vout voltage output pin 6 4 1 3 2 sot-23-6w top view 5 figure 2 table 3 pin no. symbol pin description 1 vout voltage output pin 2 on/off shutdown pin high level (h) : normal operation (step-up) low level (l) : step-up halt (all circuit halt) 3 gnd gnd pin 4 c ? charge-pump pump capacitor connection pin (negative pin) 5 c + charge-pump pump capacitor connection pin (positive pin) 6 vin voltage input pin 6-pin snb(b) top view 6 5 4 1 2 3 4 5 6 3 2 1 bottom view *1 *1. connect the heatsink of back side at shadowed area to the board, and set electric potential open or gnd. however, do not use it as the function of electrode. figure 3
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 5 table 4 pin no. symbol pin description 1 on/off shutdown pin high level (h) : normal operation (step-up) low level (l) : step-up halt (all circuit halt) 2 gnd gnd pin 3 c ? charge-pump pump capacitor connection pin (negative pin) 4 c + charge-pump pump capacitor connection pin (positive pin) 5 vin voltage input pin 6 vout voltage output pin 6-pin son(a) top view 6 5 4 1 2 3 figure 4
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 6 ? absolute maximum ratings table 5 (ta=25 c unless otherwise specified) items symbols absolute maximum ratings units c + pin voltage v c + v gnd ? 0.3 to v gnd + 7.5 v c ? pin voltage v c ? v gnd ? 0.3 to v gnd + 7 vin pin voltage v in v gnd ? 0.3 to v gnd + 5.5 vout pin voltage v out v gnd ? 0.3 to v gnd + 7 on/off pin voltage v on/off v gnd ? 0.3 to v in + 0.3 operating temperature range t opr ? 40 to + 85 c storage temperature range t stg ? 40 to + 125 power dissipation p d1 sot-23-6w 300 mw p d2 6-pin son(a) 200 p d3 6-pin snb(b) 90 caution the absolute maximum ratings are rated values exceeding which the product could suffer physical damage. these values must therefore not be exceeded under any conditions. 0 50 100 150 600 6-pin son(a) power dissipation p d [mw] 6-pin snb(b) sot-23-6w ambient temperature ta [ c ] not mounted 400 200 0 figure 5 power dissipation of the packages
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 7 ? electrical characteristics table 6 (v in =(v out(s) 0.60) v *1 , ta=25 c unless otherwise specified) items symbols conditions min. typ. max. units test circuits operation input voltage v in v out(s) 2.9 v 1.6 ? 5.0 v 2 v out(s) > 2.9 v v out(s) 0.54 ? 5.0 output voltage *2 v out(e) i out =10 ma v out(s) 0.98 v out(s) v out(s) 1.02 output current *3 i out v in =(v out(s) 0.54) v *6 5 ? ? ma v in =(v out(s) 0.60) v *1 15 ? ? v in =(v out(s) 0.80) v 25 ? ? line regulation ? v out1 v in =(v out(s) 0.60) v *1 to (v out(s) ? 0.10) v, i out =10 ma ? 50 100 mv load regulation ? v out2 i out =0.1 ma to 10 ma ? 40 80 ripple voltage *4 v rip i out =10 ma ? 70 ? mv p ? p maximum oscillation frequency f osc v out =(v out(s) 0.60) v, measure waveform at c ? pin 800 1000 1200 khz efficiency *5 v in =(v out(s) 0.54) v, v out(s) 3.0 v, i out =5 ma ? 90 ? % 1 operation consumption current i ss1 v in =v out(s) , v out =(v out(s) + 0.5) v ? 35 60 a 2 standby consumption current i sss v in =(v out(s) 0.54) v *6 to 5.0 v, v on/off =0 v ? 0.3 1.0 1 on/off pin input voltage (high level) v sh v in =(v out(s) 0.54) v *6 to 5.0 v 1.5 ? ? v on/off pin input voltage (low level) v sl v in =(v out(s) 0.54) v *6 to 5.0 v ? ? 0.3 on/off pin input current (high level) i sh v in =(v out(s) 0.54) v *6 to 5.0 v ? 0.1 ? 0.1 a on/off pin input current (low level) i sl v in =(v out(s) 0.54) v *6 to 5.0 v ? 0.1 ? 0.1 soft start time t ss i out =10 ma 0.2 1.0 4.0 ms *1. in case of v out 3.3 v, v in =2.0 v *2. v out(e) : actual output voltage v out(s) : specified output voltage *3. the output current at which t he output voltage becomes 97 % of v out(e) after gradually increasing the output current. *4. design assurance *5. the ideal efficiency is indica ted by the following expression. efficiency ( )=(v out i out ) / (2.0 v in i out ) *6. in case of v out 2.9 v, v in =1.6 v
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 8 ? test circuits 1. vout gnd on/off c ? c + vin a a a a a 4.7 f figure 6 2. vout gnd on/off c ? c + vin a a 4.7 f 0.1 f 10 f figure 7
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 9 ? operation 1. basic operation figure 8 shows the block diagram of the s-8821 series. the s-8821 series controls the output voltage by using the pulse frequency modulation (pfm) method. the sw1 to sw4 switching transisto rs are switched on/off with the cl ock generated by the internal oscillator circuit, and operates the step-up charge pump. the output voltage is fed back and the voltage split by feedback resistances r s and r f and reference voltage (v ref ) are compared by a comparator. this comparat or signal is used to modulate the oscillation pulse frequency in order to keep the output voltage constant. vin switch control circuit sw1 sw 2 sw 3 sw 4 c + c ? c pump =0.10 f soft start circuit on/off circuit on/off pfm control oscillator circuit ( 1.0 mhz ) reference voltage + - vout gnd c out =10 f r s r f c in =4.7 f figure 8
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 10 2. step-up charge pump the step-up charge pump steps up the voltage by switching on/off of the sw1 to sw4 switching transistors. first, in order to charge the pump capacitance (c pump ), set sw1 to off, sw2 to on, sw3 to off, and sw4 to on (charge cycle). following charging the electricity, in order to discharge the charged electricity to the output capacitance (c out ), sw1 set the switches as to on, sw2 to off, sw3 to on, and sw4 to off (discharge cycle). the input voltage can be stepped up to a constant voltage value by repeating this charge cycle and discharge cycle. figure 9 shows the charge cycle, and figure 10 shows the discharge cycle. v in sw1: off sw 3: off sw 4: on sw2: on c out 10 f c pump 0.10 f current flo w figure 9 v in sw1: on sw3: on sw4: off sw 2: off c out 10 f c pump 0.10 f current flow figure 10
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 11 3. shutdown pin (on/off pin) setting the on/off pin to the low level ("l") causes the voltage of the vout pin to change to the gnd level and simultaneously the operation of all the internal circuit to stop. at this time, the consumption current is largely reduced, to a level of approximately 0.3 a. the structure of the on/off pin is as shown in figure 11 . since the on/off pin is neither pulled down nor pulled up internally, do not use it in the floating state. when the on/off pin is not used, connect it to the vin pin. table 7 on/off pin internal circuit vout pin voltage ?h?: power on operating set value ?l?: power off stop v gnd level gnd on/off vin vin figure 11 4. soft start function the s-8821 series features a built-in soft star t circuit. upon power application or when the off on/ pin is switched from "l" to "h", the output voltage gradual ly rises over the soft start time, and the output current is gradually output as a result. this so ft start function reduces the input current rush.
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 12 ? external capacitor selection 1. input and output capacitors (c in , c out ) the input capacitor (c in ) lowers the power supply impedance and averages the input current. the c in value is selected according to the impedance of t he power supply that is used. select a ceramic capacitor with a small equivalent series resistance (esr). although this figure varies according to the impedance of the power supply that is used as well as the load current value, it is generally in the range of 4.7 f to 10 f. for the output capacitor (c out ), select a ceramic capacitor with a small esr for smoothing the ripple voltage. a value of 10 f is recommended for the capacitance value. use of a capacitor with a capacitance lower than 10 f results in a larger ripple voltage. conversely, use of a capacitor with a capacitance greater than 10 f results in the output voltage not being able to rise up to setting value and the impossibility to obtain the desired output current. 2. pump capacitor (c pump ) the pump capacitor (c pump ) is required for stepping up the voltage. select a ceramic capacitor with a small esr. a capacitance value of 0.10 f is recommended. use of a capacitor with a capacitance greater than 0.10 f results in a larger ripple voltage. conversely, use of a capacitor with a capacitance lower than 0.10 f results in the output voltage not being able to raise up to setting value and the impossibility to obtain the desired output current.
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 13 ? precautions ? regarding the wiring to the vin pin, vout pin, c + pin, c ? pin and gnd pin, be careful to perform pattern wiring so as to obtain low impedance. ? always connect a capacitor to the vout pin, c + pin, and c ? pin. ? connect c in and c out in the vicinity of the ic and sufficient ly strengthen the wiring for gnd pin and vin pin in order to lower the impedance of the wiring resistance, etc. high impedance may cause unstable operation. moreover, in selecting c in and c out , perform a full evaluation of the actual usage conditions. ? connect c pump in the vicinity of the ic and suffic iently strengthen the wiring for the c + pin and c ? pin in order to lower the impedance of the wiring resistance, etc. high impedance may cause instable operation. moreover, in selecting c pump , perform a full evaluation of the actual usage conditions. ? the on/off pin is configured as shown in figure 11 and is neither pulled up or down internally, so do not use this pin in a floating state. when not using the on/off pin, connect it to the vin pin. moreover, please do not apply voltage higher than vin + 0.3 v to an on/off pin. current flows for a vin pin through the protection diode inside ic. ? since this ic consists of double step-up circ uits, it cannot set more than twice voltage of v in to v out(s) . ? be careful about the usage conditions for the input/o utput voltages and output current to make sure that dissipation within the ic does not exceed the allowable power dissi pation of the package. for reference, the calculation of the power consumption in this ic is shown below. p d =(v in 2.0 ? v out ) (i out ) reference: v in =4.2 v, v out =5.5 v, i out =10 ma p d =(4.2 2.0 ? 5.5) 0.010=29 mw ? since the information described herein is subject to change without notice, confirm that this is the latest one before using. ? do not apply an electrostatic discharge to this ic that exceeds the performance ratings of the built-in electrostatic protection circuit. ? sii claims no responsibility for any and all disputes ar ising out of or in connection with any infringement of the products including this ic upon patents owned by a third party.
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 14 ? typical characteristics (1) output voltage vs. operation input voltage s-882133a s-882150a i out =10 ma, ta=25c i out =10 ma, ta=25c v out [v] 1.5 2.0 2.5 3.0 3.5 5.5 3.15 3.10 3.50 3.20 3.25 3.35 3.30 3.40 3.45 4.0 4.5 5.0 v out [v] 1.5 2.5 3.0 3.5 5.5 4.80 4.70 5.30 5.20 5.10 5.00 4.90 2.0 4.0 4.5 5.0 v in [v] v in [v] (2) output voltage vs. output current s-882133a s-882150a v in =2.0 v, ta=25c v in =3.0 v, ta=25c v out [v] 0 5 10 20 30 3.15 3.10 3.50 3.40 3.35 3.30 3.25 3.20 25 15 3.45 v out [v] 0 10 15 20 30 4.70 5.30 5.20 5.10 5.00 4.90 4.80 5 25 i out [ma] i out [ma] (3) operation consumption vs. operation input voltage s-882133a s-882150a ta=25c ta=25c i ss1 [ a] 1.5 3.5 4.0 5.5 15 10 50 40 35 30 25 20 5.0 4.5 45 2.0 2.5 3.0 i ss1 [ a] 1.5 2.5 5.5 10 50 35 30 20 3.5 40 25 45 15 3.0 4.0 2.0 4.5 5.0 v in [v] v in [v]
voltage regulation step-up charge pump dc-dc converter rev.1.1 _00 s-8821 series seiko instruments inc. 15 (4) ripple voltage vs. operation input voltage s-882133a s-882150a i out =10 ma, ta=25c i out =10 ma, ta=25c v rip [mv p-p ] 1.5 3.0 3.5 4.0 5.0 5.5 0 20 40 60 100 4.5 2.0 2.5 80 v rip [mv p-p ] 1.5 2.5 3.0 3.5 5.0 5.5 20 0 40 60 100 4.5 80 4.0 2.0 v in [v] v in [v] (5) efficiency *1 vs. operation input voltage s-882133a s-882150a i out =10 ma, ta=25c i out =10 ma, ta=25c [%] 1.5 2.0 3.5 4.5 5.5 20 40 60 80 100 4.0 5.0 3.0 2.5 [%] 1.5 2.5 3.5 5.5 20 40 60 80 100 4.0 3.0 4.5 5.0 2.0 v in [v] v in [v] *1. the ideal efficiency is indica ted by the following expression. efficiency ( )=(v out i out ) / (2.0 v in i out ) (6) maximum oscillation frequency vs. operation input voltage s-882133a s-882150a ta=25c ta=25c f osc [khz] 1.5 2.0 2.5 3.5 5.0 5.5 700 800 900 1000 1100 1200 1300 4.0 4.5 3.0 f osc [khz] 1.5 2.0 2.5 4.0 5.0 5.5 700 800 900 1000 1100 1200 1300 4.5 3.5 3.0 v in [v] v in [v]
voltage regulation step-up charge pump dc-dc converter s-8821 series rev.1.1 _00 seiko instruments inc. 16 (7) load fluctuation s-882133a s-882150a v in =2.0 v v in =3.0 v ch1 ch2 1 ma 10 ma ch1 ch2 1 ma 10 ma [1 ms/div.] [1 ms/div.] ch1: v out [20 mv/div.] ch2: i out [2 ma/div.] ch1: v out [20 mv/div.] ch2: i out [2 ma/div.] (8) input voltage fluctuation s-882133a s-882150a i out =10 ma i out =10 ma ch1 ch2 1.8 v 3.3 v ch1 ch2 3.0 v 5.0 v [1 ms/div.] [1 ms/div.] ch1: v out [20 mv/div.] ch2: v in [1 v/div.] ch1: v out [20 mv/div.] ch2: v in [1 v/div.]

!"#! $

%
%&""" &'
% !"#! $
( ( )**"$! +'!$,- .
&/ ( +
0. +
0.
12
1 !"#! $
1 32&"4**"&54!,$!"&2'&"!

!"#! $ % %&' (&' ) % %**+!,-+$.*+.,,"!/$!"$ 0!!+/.0.1!*0".#$! (,"0$,$+!,+$*0".#$! !#!+!*,#$!,/$!".
% %&' (&' ) % 2 2 !"#! $ 3.."$! (+""" %+0 ( (
4%5 6 % %&' (&' ) % +7 8 2 !"#! $ '/+"1.."+91!*$!"+/0+"! /

!" # $%& $ " ' ( '
)'!' "!' ! )''!' "!' #! *! #!
$ #

+ +& ,- -

./ $
0
0

01 "'+2 *!$ )$!" 345 345 1+6- -+76 8 +1 &+
the information described herein is subject to change without notice. seiko instruments inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. the application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. when the products described herein are regulated products subject to the wassenaar arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. use of the information described herein for other purposes and/or reproduction or copying without the express permission of seiko instruments inc. is strictly prohibited. the products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of seiko instruments inc. although seiko instruments inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. the user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.

▲Up To Search▲

Price & Availability of S-882136AMH-M2L-TF

	To Download S-882136AMH-M2L-TF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .