1 ftr-k1 series n features l ul, csa, vde, sev, semko, cqc recognized l tv-8 is available l working class: c l ul class b (130c) wire class l type of service: continuous duty l heavy duty miniature slim type power relay l high insulation in small package - insulation distance: 8 mm - dielectric strength: 5,000 vac (between coil and contacts) - surge strength: 10,000 v l standard and high sensitive types available l flux free type and plastic sealed type available l cadmium free type l rohs compliant. please see page 7 for more information note: actual marking omits the hyphen (-) of (*) marking example: vs-12mbu-nr power relay 1 pole - 15a vs-nr series (a) relay type vs : vs series (b) coil rated voltage 12 : 3....100vdc coil rating table at page 3 (c) coil type nil : standard type (700-750mw) s : high sensitive type (530mw) (d) contact confguration m : 1 form a (spst-no) (e) enclosure b : flux proof type, r tii c : plastic sealed type (with tape), r tiii k : plastic sealed type, r tiii (f) tv type nil : tv rating type u : non tv rating type (standard type) (g) contact material nr : silver alloy (agsno ino) (h) safety standard uc : ul, css sm2 : ul, csa, vde, semko im2 : ul, csa, vde, sev , semko n partnumber information vs - 12 s m b u - nr - uc [example] (a) (*) (b) (c) (d) (e) (f ) (g) (h) non-promotional not for new designs
2 ftr-k1 series n specification *1 when max. carrying current is more than 10a, pcb layout needs to be considered. *2 minimum switching loads mentioned above are reference values. please perform the confrmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. vs-nr series tv-8 rating type standard vs - ( ) m - nr vs - ( ) mu - nr contact data confguration 1 form a (spst-no) construction single material silver alloy (agsno ino) resistance (initial) max. 100mohm at 6vdc, 1a contact rating 15a, 240vac / 24vdc max. carrying current *1 15a max. switching voltage 250vac, 150 vdc max. switching power 1,800va, 360w max. inrush current (at lamp load) 117a, 120vac - min. switching load *2 100 ma, 5 vdc life mechanical min. 20 x 10 6 operations electrical contact rating min. 100 x 10 3 operations (resistive) motor min. 50 x 10 3 operations (at 1/4 hp 120vac ul hp rating) min. 30 x 10 3 operations (at 1/4 hp 120vac ul hp rating) lamp min. 25 x 10 3 operations coil data rated power (at 20 c) standard type: 700 to 750mw high sensitive type: 530mw operate power (at 20 c) standard type: 350 - 370mw high sensitive type: 260mw operating temperature range standard type: -40 c to +65 c (no frost) high sensitive type: -40 c to +75 c (no frost) timing data operate (at nominal voltage) max. 15 ms (without bounce) release (at nominal voltage) max. 10 ms (no diode) insulation resistance (initial) min. 1,000mohm at 500vdc dielectric strength open contacts 1,000vac (50/60hz) 1min., 10ma detection current contacts to coil 5,000vac (50/60hz) 1min., 10ma detection current surge strength coil to contacts 10,000v, 1.2 x 50s standard wave clearance 8 mm creepage 8 mm en61810-1, vde0435 voltage 250 v pollution degree 2 material group iii other vibration resistance misoperation 10 to 55hz double amplitude 1.5 mm endurance 10 to 55hz double amplitude 1.5 mm shock misoperation min. 100m/s2 (11 1ms) endurance min. 1,000m/s2 (6 1ms) weight approximately 17 g
3 ftr-k1 series n coil rating vs-nr series coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) must operate voltage (vdc) *1 must release - voltage (vdc) *1 max. coil voltage (vdc) rated power (mw) 3 3 12.5 2.1 0.3 4.95 720 5 5 36 3.5 0.5 8.25 700 6 6 50 4.2 0.6 9.90 720 9 9 115 6.3 0.9 14.85 700 12 12 200 8.4 1.2 19.8 720 14 14 280 9.8 1.4 23.1 700 18 18 460 12.6 1.8 29.7 24 24 820 16.8 2.4 39.6 36 36 1,850 25.2 3.6 59.4 48 48 3,300 33.6 4.8 79.2 60 60 5,100 42 6 99 100 100 13,400 70 10 165 750 standard type high sensitive type (250 mw) coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) must operate voltage (vdc) *1 must release - voltage (vdc) *1 max. coil voltage (vdc) rated power (mw) 3 3 17 2.1 0.3 4.95 530 5 5 47 3.5 0.5 8.25 6 6 68 4.2 0.6 9.90 9 9 115 6.3 0.9 14.85 12 12 270 8.4 1.2 19.8 14 14 370 9.8 1.4 23.1 18 18 610 12.6 1.8 29.7 24 24 1,000 16.8 2.4 39.6 36 36 2,450 25.2 3.6 59.4 48 48 4,400 33.6 4.8 79.2 60 60 6,800 42 6 99 100 100 18,860 70 10 165 note: all values in the table are valid for 20c and zero contact current. * specifed operate values are valid for pulse wave voltage.
4 ftr-k1 series n characteristic data vs-nr series type compliance contact rating ul ul 508 e 56140 flammability: ul 94-v0 (plastics) isolation: classb 10a, 240vac(resistive) 1/2 hp, 240vac/120vac 1/3 hp, 120vac / 240vac pilot duty: b150 [tv-8] 15a, 120vac/24vdc (resistive) 1/3 hp, 240vac/120vac csa c22.2 no. 14 lr 35579 vde din en 61810-1 0435 part 201 40014665 15a 250vac (cos=1) 4.3a 250vac (cos=0.4) 15a 24vdc (0ms) 15a/120vac, 250vac also complies with sev, semko, nemko, demko, fimko, cqc n safety standards
5 ftr-k1 series vs-nr series n reference data
6 ftr-k1 series n dimensions vs-nr series l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view) vs-mb-nr type fux proof type vs-mc-nr type (plastic sealed type with tape) vs-mk-nr type (plastic sealed type) unit: mm
7 ftr-k1 series 1. general information l all signal and power relays produced by fujitsu components are compliant with rohs directive 2002/95ec including amendments. l cadmium as used in electrical contacts is exempted from the rohs directives on october 21st, 2005. (amendment to directive 2 002/95/ec) l all of our signal and power relays are lead-free. please refer to lead-free status info for older date codes at: http://www .fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf l lead free solder plating on relay terminals is sn-3.0ag-0.5cu, unless otherwise specifed. this material has been ve rifed to be compatible with pbsn assembly process. 2. recommended lead free solder profle l recommended solder sn-3.0ag-0.5cu. rohs compliance and lead free information 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. tin whiskers l dipped snagcu solder is known as presenting a low risk to tin whisker development. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c solder bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec. vs-nr series
8 ftr-k1 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2011 fujitsu components europe b.v. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. the contents, data and information in this datasheet are provided by fujitsu component ltd. as a service only to its user and only for gen - eral information purposes. the use of the contents, data and information provided in this datasheet is at the users own risk. fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen - sive, complete and up to date. fujitsu components europe b.v. and affliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. nor do fujitsu components europe b.v. and affliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ftness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. rev. march 02, 2011 vs-nr series
|
