View FH17L-08S-05SH_6899241.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

25 low profile 0.5mm pitch connectors for fpc fh17 series features 1. low profile 0.5mm pitch fpc connectors as products become lighter/thinner/shorter/smaller, requests for thinly-made type fpc connectors are rapidly increasing. the fh17 series is an ultra miniature version of the hirose? popular fh12 series. fh17 has 35 % - 45 % lower profile above the board. * fh17 : on-board type, height of 1.3 mm from board surface * fh17l : offset standard type, height of 1.0 mm from board surface * fh17lr : offset reverse type, height of 1.0 mm from board surface 2. easy to use flip-lock actuator flip-lock (rotating type) zif mechanism enables good connectivity of fpc by a simple operation and light force. no board space is required for flip lock operation as compared to slide lock zif connectors. 3. variety of sizes and options in addition to the on-board type (fh17), board drop-in types (fh17l and fh17lr) are also available. selection will depend on the application mounting. connectors are available with 8 to 30 contacts. 4. adaptable to thin-type fpc it conforms to the thin-type fpc ( 0.17mm ) now being used for small size electronic equipment such as cameras, etc. (thin-type fpc: specifications without stiffener of double-faced fpc will reduce the cost of fpc. a single-faced fpc still requires stiffener, but the reduced thickness is easier for manufacturers to produce. 5. packaged for pick-and-place machine embossed tape packaging allows automatic mounting. applications mobile telephones, devices using lcds, cd-roms, cameras, other miniature devices fh17l(board drop-in standard type)flip-lock mechanism fh17lr (board drop-in reverse type) flip-lock mechanism fh17 (on-board type) flip-lock mechanism (
26 product specifications 100v dc 150v ac/1 minute 20 cycles 1ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. 96 hours at temperature of 40? and humidity of 90% to 95% 5 cycles under conditions as follows; temperature: -40 ? / 15 to 35 ? / 85 ? / 15 to 35 ? , time: 30 / 5 max. / 30 / 5 max.(minutes) reflow: at the recommended temperature profile manual soldering: 3505? for 3 seconds applicable fpc t=0.17 tin-lead plating + 0.03 - 0.04 item 1. insulation resistance 2. withstanding voltage 4. durability (insertion/withdrawal) 3.contact resistance 5.vibration 6.shock 7. humidity (steady state) 8. temperature cycle 9.resistance to soldering heat specification 500m ohms minimum no flashover or insulation breakdown. 50m ohms maximum contact resistance : 50m ohms maximum no damage, cracks, or parts dislocation. no electrical discontinuity of 1s or more contact resistance: 50m ohms maximum. no damage, cracks, or parts dislocation. no electrical discontinuity of 1s or more contact resistance: 50m ohms maximum no damage, cracks, or parts dislocation. contact resistance: 50m ohms maximum insulation resistance: 50m ohms minimum no damage, cracks, or parts dislocation. contact resistance: 50m ohms maximum insulation resistance: 50m ohms minimum no damage, cracks, or parts dislocation. no deformation of components affecting performance. conditions (note:4) fh17l - 30s - 0.5 sh ( 05 ) 1 2 3 4 5 6 ordering information remarks -------------- -------------- ul94v-0 ul94v-0 material part contact metal fittings insulated tape insulator insulator material lcp pps phosphor bronze brass polyamide finish -------------- -------------- tin-lead plating tin-lead plating -------------- 2 3 4 5 6 1 ratings current rating voltage rating 0.4a dc 50v ac operating temp. range operatinghumidity range - 40 to + 70 ? (note.1) relative humidity 90% max. (no dew-fall) storage temp. range storage humidity range - 10 to + 50 ? (note.2) relative humidity 90% max. (no dew-fall) note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. note 3. the above standards represent this series. the individual formal agreement should be based on the specification. series name fh17 mounting type none : on-board type l : offset type lr : offset reverse type number of contacts 8, 10, 15, 20, 24, 30 contacts pitch 0.5mm contact style sh : smt horizontal mounting type plating specifications blank : tin-lead plating ( 05 ) : gold plating
27 b connector operating instructions, precautions and recommendations operation precautions 1.fpc termination procedure. connector installed on the board. 1) lift up the actuator. use thumb or index finger. 2) rotate down the actuator until firmly closed. it is critical that the inserted fpc is not moved and remains fully inserted. should the fpc be moved, open the actuator and repeat the process, starting with step 1 above. 2) the connector will assure reliable performance when the actuator is open to 90 maximum (see fig.1) do not exceed this angle, as this may cause permanent damage to the connector. 2.fpc removal 1) lift up the actuator. 2) carefully remove the fpc. 3) assure that the fpc is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. fpc conductor surface (bottom side) 1) do not apply excessive force or use any type of tool to operate the actuator.
28 note the coplanarity of each lead and metal fitting is within 0.1. on-board type ( fh17 ) 2.9 f e 0.2 0.5 b a c d 0.6 1.3 4.3 0.6 (mm) note:embossed tape reel packaging(2,000 pieces/reel). order by number of reels. part number fh17-10s-0.5sh fh17-15s-0.5sh fh17-20s-0.5sh fh17-24s-0.5sh fh17-30s-0.5sh 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 10 15 20 24 30 0 8.2 10.7 13.2 15.2 18.2 0 4.5 0 7.0 0 9.5 11.5 14.5 0 9.8 12.3 14.8 16.8 19.8 0 5.57 0 8.07 10.57 12.57 15.57 0 8.5 11.0 13.5 15.5 18.5 0 6.1 0 8.6 11.1 13.1 16.1 cl no. number of contacts a b c d e f 1
29 0 4.5 0 7.0 0 9.5 11.5 14.5 b 0 9.1 11.6 14.1 16.1 19.1 g 0 6.1 0 8.6 11.1 13.1 16.1 h 0 5.3 0 7.8 10.3 12.3 15.3 j (mm) part number fh17-10s-0.5sh fh17-15s-0.5sh fh17-20s-0.5sh fh17-24s-0.5sh fh17-30s-0.5sh 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 10 15 20 24 30 cl no. number of contacts b recommended land/ metal mask dimensions ( fh17 ) * recommended metal mask thickness: t = 0.15 note:embossed tape reel packaging (2,000 pieces/reel). order by number of reels.
30 (0.4) (3.5) (0.35) (0.8) (1) (0.3) (0.3) (0.2) l a b c d k f 4.55 1.4 (including polyamide tape) 1.2 1.3 2 0.5 note: the coplanarity of each lead and metal fitting is within 0.1. offset standard type (fh17l) (mm) note:embossed tape reel packaging (2,000 pieces/reel). order by number of reels. part number fh17l- 0 8s-0.5sh fh17l-10s-0.5sh fh17l-20s-0.5sh fh17l-30s-0.5sh 586-0654-4 586-0650-3 586-0651-6 586-0652-9 0 8 10 20 30 0 7.2 0 8.2 13.2 18.2 0 3.5 0 4.5 0 9.5 14.5 0 8.8 0 9.8 14.8 19.8 0 4.57 0 5.57 10.57 15.57 12.8 13.8 18.8 23.8 0 5.1 0 6.1 11.1 16.1 0 4.4 0 5.4 10.4 15.4 cl no. number of contacts a b c d k f l
31 (1) (3.5) (0.35) (0.8) (0.4) (0.5) (0.5) (0.2) l a b c d k f 4.55 1.4 (including polyamide tape) 1.2 1.3 2 0.5 note: the coplanarity of each lead and metal fitting is within 0.1. offset reverse type (fh17lr) (mm) note:embossed tape reel packaging (2,000 pieces/reel). order by number of reels. part number fh17lr- 0 8s-0.5sh fh17lr-10s-0.5sh fh17lr-20s-0.5sh fh17lr-24s-0.5sh fh17lr-30s-0.5sh 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 0 8 10 20 24 30 0 7.2 0 8.2 13.2 15.2 18.2 cl no. number of contacts a 0 3.5 0 4.5 0 9.5 11.5 14.5 b 0 8.8 0 9.8 14.8 16.8 19.8 c 0 4.57 0 5.57 10.57 12.57 15.57 d 12.8 13.8 18.8 20.8 23.8 k 0 5.1 0 6.1 11.1 13.1 16.1 f 0 4.4 0 5.4 10.4 12.4 15.4 l
32 note: the coplanarity of each lead and metal fitting is within 0.1. b recommended land/ metal mask dimensions (fh17l and fh17lr) m0.1 n0.1 p0.1 b0.05 0.50.05 1.80.1 1.80.1 3.650.1 1.50.1 0.250.03(metal mask) 0.30.03(land) * recommended metal mask thickness: t=0.15 (0.85) (0.5) (mm) note:embossed tape reel packaging (2,000 pieces/reel). order by number of reels. part number fh17l- 8s-0.5sh fh17l- 10s-0.5sh fh17l- 20s-0.5sh fh17l- 30s-0.5sh fh17lr-8s-0.5sh fh17lr-10s-0.5sh fh17lr-20s-0.5sh fh17lr-24s-0.5sh fh17lr-30s-0.5sh 586-0654-4 586-0650-3 586-0651-6 586-0652-9 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 0 8 10 20 30 0 8 10 20 24 30 0 3.5 0 4.5 0 9.5 14.5 0 3.5 0 4.5 0 9.5 11.5 14.5 13.4 14.4 19.4 24.4 13.4 14.4 19.4 21.4 24.4 10.4 11.4 16.4 21.4 10.8 11.8 16.8 18.8 21.8 0 9.4 10.4 15.4 20.4 0 9.8 10.8 15.8 17.8 20.8 cl no. number of contacts b m n p
33 (mm) note:embossed tape reel packaging (2,000 pieces/reel). order by number of reels. part number fh17- 10s-0.5sh fh17- 15s-0.5sh fh17- 20s-0.5sh fh17- 24s-0.5sh fh17- 30s-0.5sh fh17l- 0 8s-0.5sh fh17l- 10s-0.5sh fh17l- 20s-0.5sh fh17l- 30s-0.5sh fh17lr- 0 8s-0.5sh fh17lr-10s-0.5sh fh17lr-20s-0.5sh fh17lr-24s-0.5sh fh17lr-30s-0.5sh 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 586-0654-4 586-0650-3 586-0651-6 586-0652-9 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 10 15 20 24 30 0 8 10 20 30 0 8 10 20 24 30 0 4.5 0 7.0 0 9.5 11.5 14.5 0 3.5 0 4.5 0 9.5 14.5 0 3.5 0 4.5 0 9.5 11.5 14.5 0 5.5 0 8.0 10.5 12.5 15.5 0 4.5 0 5.5 10.5 15.5 0 4.5 0 5.5 10.5 12.5 15.5 cl no. number of contacts b q * a combination of polyamide and heat-hardened adhesive should be used for the stiffener material in the case of single-sided fpc. the copper foil of the rear surface should not be used in the case of double-sided fpc. b recommended fpc dimensions (fh17, fh17l, and fh17lr) 3min 0.50.05 b0.05 0.50.1 0.50.1 q0.07 0.350.03 0.17 +0.03 C 0.04 2C r0.2
34 b packaging specification embossed carrier tape dimensions reel dimensions (mm) part number fh17-10s-0.5sh fh17-15s-0.5sh fh17-20s-0.5sh fh17-24s-0.5sh fh17-30s-0.5sh 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 10 15 20 24 30 16 24 24 24 32 --------- --------- --------- --------- 28.4 0 7.5 11.5 11.5 11.5 14.2 10.6 13.1 15.6 17.6 20.6 0 6.5 0 9.0 11.5 13.5 16.5 16.5 24.5 24.5 24.5 32.5 cl no. number of contacts r s t u v w on-board type (fh17) v u 4.6 1.4 s 1.8 1.9 r t 12 4 2 ?1.5 1.75 1.7 unreeling direction 1.5 0.3 flat surface for placement with automatic equipment ?13 ?80 ?330 2 w empty section end portion mounting portion embossed carrier tape leader area (400mm or more) empty section top cover tape (10 pockets or more) (10 pockets or more)
35 standard type reverse type part number fh17lr- 0 8s-0.5sh fh17lr-10s-0.5sh fh17lr-20s-0.5sh fh17lr-24s-0.5sh fh17lr-30s-0.5sh 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 0 8 10 20 24 30 24 24 32 32 44 ---- ---- 28.4 28.4 40.4 11.5 11.5 14.2 14.2 20.2 13.8 14.8 19.8 21.8 24.8 24.5 24.5 32.5 32.5 44.5 cl no. number. of contacts r s t x w embossed carrier tape dimensions s r x t 2.8 5.6 1.9 unreeling direction 1.5 1.75 0.1 1.8 12 4 2 ?1.5 0.3 1.7 ?13 ? 80 ? 330 2 w blank portion end portion mounting portion embossed carrier tape lead portion (400mm min.) blank portion top cover tape (10 pockets min.) (10 pockets min.) reel dimensions (mm) (mm) offset type (fh17l and fh17lr) part number fh17l- 0 8s-0.5sh fh17l-10s-0.5sh fh17l-20s-0.5sh fh17l-30s-0.5sh 586-0654-4 586-0650-3 586-0651-6 586-0652-9 0 8 10 20 30 24 24 32 44 ---- ---- 28.4 40.4 11.5 11.5 14.2 20.2 13.8 14.8 19.8 24.8 24.5 24.5 32.5 44.5 cl no. number. of contacts r s t x w flat surface for placement with automatic equipment
36 b recommended temperature profile hrs test conditions solder method :reflow, ir/hot air (nihon den-netsu co., ltd.s part number: sensby nr- 2 ) environment :room air solder composition :paste, 63%sn/37%pb (senju metal industry, co., ltd.spart number: oz63-201c-50-9) test board : glass epoxy 40mm80mm1.6mm thick land dimensions :on-board type 0.3mm 1.0mm offset type 0.3mm 1.5mm metal mask :on-board type 0.25mm1.0mm0.15mm thick offset type 0.25mm1.5mm0.15mm thick this temperature profile is based on the above conditions. \in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations.
37 sumitomo bakelite co., ltd. flexible printed circuit board division tel:+81 3 5462 4191 5-8, higashi-shinagawa 2-chome, shinagawa-ku, tokyo, japan fax:+81 3 5462 4882 fujikura ltd. electronics global marketing department tel:+81 3 5606 1165 1-5-1, kiba, koto-ku, tokyo, japan fax:+81 3 5606 1530 nok corporation sales division overseas business department tel:+81 3 3432 6976/8415 1-12-15, shiba-daimon, minato-ku, tokyo, japan fax:+81 3 3432 3919 b fh17 series fpc construction (recommended specifications) 1. single-sided fpc 2. using double-sided fpc 3. precautions 1. this specification is a recommendation for the construction of the fh17 series fpc (t=0.17 +0.03/-0.04). 2. the fh17 series are connectors for thin fpc which is beginning to be used in cameras and other miniature equipment. stiffener is not required for double-sided fpc which will be reflected in fpc cost reduction. please note that in the case of single-sided fpc, stiffener is required, but the thickness dimension can be created easily. for details about the construction, please contact the fpc/ffc manufacturers. note: stiffener is not required for the double-sided fpc. to prevent release of the lock due to fpc bending, please do not use copper foil on the rear side. material name covering layer film cover adhesive surface treatment copper foil base adhesive base film reinforcement material adhesive stiffener polyamide 1 mil tin-lead plating cu 1oz polyamide 1 mil heat-hardened adhesive polyamide 2 mil total 25 25 5 35 18 25 30 50 163 material thickness ( m) material name covering layer film cover adhesive surface treatment through hole copper copper foil base adhesive base film base adhesive copper foil cover adhesive covering layer film polyamide 1 mil tin-lead plating cu cu 1oz polyamide 1 mil cu 1oz polyamide 1 mil total 25 25 5 15 35 18 25 18 35 33 25 174 material thickness ( m) fpc/ffc manufactures' contact list

▲Up To Search▲

Price & Availability of FH17L-08S-05SH

	To Download FH17L-08S-05SH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .