ca tcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-02 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 1 / 2 typical applications features telecommunication mechanical control (internal trimmer) wireless application standard 4-pin dip package frequency range 1 mhz ? 35 mhz frequency stabilities parameter code i frequency stability operating temp range 15 5.0 ppm 17 2.5 ppm -30....+75 18 5.0 ppm 19 2.5 ppm vs. operating temperature range 13 1.5 ppm -20....+70c 38 5.0 ppm 39 2.5 ppm 40 1.5 ppm -10....60c parameter value condition vs. supply voltage change vs. load change vs. aging / year < 0.5 ppm < 0.3 ppm < 1.0 ppm v s 5% load 5% frequency tuning parameter code ii value condition mechanical (no efc) blank > 3.0 ppm (internal trimmer) electrical freq. control (efc) > 5.0 ppm note 1 voltage range (vc) u 0.5 v to 4.5 v @ v s =5v pulling slope positive rf output parameter code iii value condition signal hcmos note 2 load 15pf 10% duty cycle 06 40/60% @ vc/2 signal clipped sinewave frequency >9.6 mhz load 20k w || 5pf output power 07 > 1 v pp @ 20k w || 5pf supply voltage parameter value condition supply voltage (v s ) 5v 5% power consumption steady state < 3 ma clipped sinewave < 20ma hcmos additional parameters parameter value condition frame specification tqa 9000
ca tcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-02 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 2 / 2 enclosure drawing all units in mm ?0,5 5,0 18,8max. 15,24 4 1 12,2max. 7,62 0,2 0,2 0,3 0,3 4,5 1 0,3 2,5 0,3 7 8 14 1 code ii u pin pin pin pin pin 1 1 7 8 14 voltage control n/c gnd rf output supply voltage (v s ) ordering code code i code ii code iii model frequency stability frequency tuning rf output frequency example: ca 15 u 06 10m00000 order: ca notes 1 option ?u? includes the mechanical frequ. control 2 can drive ttl, acmos and cmos unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) subject to technical modification; not all options are available at all frequencies
|
