vishay dz23 series document number 85765 rev. 1.3, 06-oct-03 vishay semiconductors www.vishay.com 1 18110 12 3 dual common-cathode zener diodes features ? this diode is also available in other case styles and configurations including: the dual diode com- mon cathode configuration with type designation az23, the single diode sot-23 case with the type designation bzx84c, and the single diode sod-123 case with the type designation bzt52c. dual silicon planar zener diodes, common cathode the zener voltages are graded according to the international e 24 standard. standard zener volt- age tolerance is 5 %. replace "c" with "b" for 2 % tolerance. other voltage tolerances and other zener voltages are available upon request. the parameters are valid for both diodes in one case. ? v z and ? r zj of the two diodes in one case is 5 % mechanical data case: sot-23 plastic package weight: approx. 8 mg packaging codes/options: e8 / 10k per 13 " reel (8 mm tape), 30k/box e9 / 3k per 7 " reel (8 mm tape), 30k/box absolute maximum ratings t amb = 25 c, unless otherwise specified 1) device on fiberglass substrate, see layout thermal characteristics t amb = 25 c, unless otherwise specified 1) device on fiberglass substrate, see layout parameter test condition symbol value unit power dissipation p tot 300 1) mw parameter test condition symbol value unit thermal resistance junction to ambient air r ja 420 1) c/w junction temperature t j 150 c storage temperature range t s - 65 to + 150 c
www.vishay.com 2 document number 85765 rev. 1.3, 06-oct-03 vishay dz23 series vishay semiconductors electrical characteristics 1) tested with pulses tp = 5 ms partnumber marking code zener voltage range 1) dynamic resistance test current temperature coefficient of zener voltage reverse voltage v z @ i z r zj @ i z = 5 ma, f = 1 khz, r zj @ i z = 1 ma, f = 1 khz, i z vz @ i z = 5 ma v r @ i r = 100 na v ? ma 10 -4 /c v min max min max dz23-c2v7 v1 2.5 2.9 75 (<83) <500 5 -9 -4 - dz23-c3 v2 2.8 3.2 80 (<95) <500 5 -9 -3 - dz23-c3v3 v3 3.1 3.5 80 (<95) <500 5 -8 -3 - dz23-c3v6 v4 3.4 3.8 80 (<95) <500 5 -8 -3 - dz23-c3v9 v5 3.7 4.1 80 (<95) <500 5 -7 -3 - dz23-c4v3 v6 4 4.6 80 (<95) <500 5 -6 -1 - dz23-c4v7 v7 4.4 5 70 (<78) <500 5 -5 2 - dz23-c5v1 v8 4.8 5.4 30 (<60) <480 5 -3 4 >0.8 dz23-c5v6 v9 5.2 6 10 (<40) <400 5 -2 6 >1 dz23-c6v2 v10 5.8 6.6 4.8 (<10) <200 5 -1 7 >2 dz23-c6v8 v11 6.4 7.2 4.5 (<8) <150 5 2 7 >3 dz23-c7v5 v12 7 7.9 4 (<7) <50 5 -3 7 >5 dz23-c8v2 v13 7.7 8.7 4.5 (<7) <50 5 4 7 >6 dz23-c9v1 v14 8.5 9.6 4.8 (<10) <50 5 5 8 >7 dz23-c10 v15 9.4 10.6 5.2 (<15) <70 5 5 8 >7.5 dz23-c11 v16 10.4 11.6 6 (<20) <70 5 5 9 >8.5 dz23-c12 v17 11.4 12.7 7 (<20) <90 5 6 9 >9 dz23-c13 v18 12.4 14.1 9 (<25) <110 5 7 9 >10 dz23-c15 v19 13.8 15.6 11 (<30) <110 5 7 9 >11 dz23-c16 v20 15.3 17.1 13 (<40) <170 5 8 9.5 >12 dz23-c18 v21 16.8 19.1 18 (<50) <170 5 8 9.5 >14 dz23-c20 v22 18.8 21.2 20 (<50) <220 5 8 10 >15 dz23-c22 v23 20.8 23.3 25 (<55) <220 5 8 10 >17 dz23-c24 v24 22.8 25.6 28 (<80) <220 5 8 10 >18 dz23-c27 v25 25.1 28.9 30 (<80) <250 5 8 10 >20 dz23-c30 v26 28 32 35 (<80) <250 5 8 10 >22.5 dz23-c33 v27 31 35 40 (<80) <250 5 8 10 >25 dz23-c36 v28 34 38 40 (<90) <250 5 8 10 >27 dz23-c39 v29 37 41 50 (<90) <300 5 10 12 >29 dz23-c43 v30 40 46 60 (<100) <700 5 10 12 >32 dz23-c47 v31 44 50 70 (<100) <750 5 10 12 >35 dz23-c51 v32 48 54 70 (<100) <750 5 10 12 >38
vishay dz23 series document number 85765 rev. 1.3, 06-oct-03 vishay semiconductors www.vishay.com 3 electrical characteristics 1) tested with pulses tp = 5 ms partnumber marking code zener voltage range 1) dynamic resistance test current temperature coefficient of zener voltage reverse voltage v z @ i z r zj @ i z = 5 ma, f = 1 khz, r zj @ i z = 1 ma, f = 1 khz, i z vz @ i z = 5 ma v r @ i r = 100 na v ? ma 10 -4 /c v min max min max dz23-b2v7 v1 2.65 2.75 75 (<83) <500 5 -9 -4 - dz23-b3 v2 2.94 3.06 80 (<95) <500 5 -9 -3 - dz23-b3v3 v3 3.23 3.37 80 (<95) <500 5 -8 -3 - dz23-b3v6 v4 3.53 3.67 80 (<95) <500 5 -8 -3 - dz23-b3v9 v5 3.82 3.98 80 (<95) <500 5 -7 -3 - dz23-b4v3 v6 4.21 4.39 80 (<95) <500 5 -6 -1 - dz23-b4v7 v7 4.61 4.79 70 (<78) <500 5 -5 2 - dz23-b5v1 v8 5 5.2 30 (<60) <480 5 -3 4 >0.8 dz23-b5v6 v9 5.49 5.71 10 (<40) <400 5 -2 6 >1 dz23-b6v2 v10 6.08 6.32 4.8 (<10) <200 5 -1 7 >2 dz23-b6v8 v11 6.66 6.94 4.5 (<8) <150 5 2 7 >3 dz23-b7v5 v12 7.35 7.65 4 (<7) <50 5 -3 7 >5 dz23-b8v2 v13 8.04 8.36 4.5 (<7) <50 5 4 7 >6 dz23-b9v1 v14 8.92 9.28 4.8 (<10) <50 5 5 8 >7 dz23-b10 v15 9.8 10.2 5.2 (<15) <70 5 5 8 >7.5 dz23-b11 v16 10.8 11.2 6 (<20) <70 5 5 9 >8.5 dz23-b12 v17 11.8 12.2 7 (<20) <90 5 6 9 >9 dz23-b13 v18 12.7 13.3 9 (<25) <110 5 7 9 >10 dz23-b15 v19 14.7 15.3 11 (<30) <110 5 7 9 >11 dz23-b16 v20 15.7 16.3 13 (<40) <170 5 8 0.5 >12 dz23-b18 v21 17.6 18.4 18 (<50) <170 5 8 0.5 >14 dz23-b20 v22 19.6 20.4 20 (<50) <220 5 8 10 >15 dz23-b22 v23 21.6 22.4 25 (<55) <220 5 8 10 >17 dz23-b24 v24 23.5 24.5 28 (<80) <220 5 8 10 >18 dz23-b27 v25 26.5 27.5 30 (<80) <250 5 8 10 >20 dz23-b30 v26 29.4 30.6 35 (<80) <250 5 8 10 >22.5 dz23-b33 v27 32.3 33.7 40 (<80) <250 5 8 10 >25 dz23-b36 v28 35.3 36.7 40 (<90) <250 5 8 10 >27 dz23-b39 v29 38.2 39.8 50 (<90) <300 5 10 12 >29 dz23-b43 v30 42.1 43.9 60 (<100) <700 5 10 12 >32 dz23-b47 v31 46.1 47.9 70 (<100) <750 5 10 12 >35 dz23-b51 v32 50 52 70 (<100) <750 5 10 12 >38
www.vishay.com 4 document number 85765 rev. 1.3, 06-oct-03 vishay dz23 series vishay semiconductors typical characteristics (t amb = 25 c unless otherwise specified) figure 1. forward characteristics figure 2. admissible power dissipation vs. ambient temperature figure 3. pulse thermal resistance vs. pulse duration 18114 18115 c 18116 figure 4. dynamic resistance vs. zener current figure 5. capacitance vs. zener voltage figure 6. dynamic resistance vs. zener current 18117 18118 18119
vishay dz23 series document number 85765 rev. 1.3, 06-oct-03 vishay semiconductors www.vishay.com 5 figure 7. dynamic resistance vs. zener current figure 8. thermal differential resistance versus zener voltage figure 9. dynamic resistance versus zener voltage 18120 c/w 18121 18122 figure 10. temperature dependence of zener voltage versus zener voltage figure 11. change of zener voltage versus junction temperature figure 12. temperature dependence of zener voltage versus zener voltage c 18123 18124 c 18125
www.vishay.com 6 document number 85765 rev. 1.3, 06-oct-03 vishay dz23 series vishay semiconductors figure 13. change of zener voltage versus junction temperature figure 14. change of zener voltage from turn-on up to the point of thermal equilibrium versus zener voltage figure 15. change of zener voltage from turn-on up to the point of thermal equilibrium versus zener voltage 18126 18127 18128
vishay dz23 series document number 85765 rev. 1.3, 06-oct-03 vishay semiconductors www.vishay.com 7 18111 figure 16. breakdown characteristics 18112 figure 17. breakdown characteristics
www.vishay.com 8 document number 85765 rev. 1.3, 06-oct-03 vishay dz23 series vishay semiconductors layout for r ja test thickness: fiberglass 0.059 in. (1.5 mm) copper leads 0.012 in. (0.3 mm) 18113 figure 18. breakdown characteristics 0.59 (15) 0.2 (5) 0.03 (0.8) 0.30 (7.5) 0.12 (3) .04 (1) 0.06 (1.5) 0.20 (5.1) .08 (2) .08 (2) .04 (1) 0.47 (12) dimensions in inches (millimeters) 17451
vishay dz23 series document number 85765 rev. 1.3, 06-oct-03 vishay semiconductors www.vishay.com 9 package dimensions in inches (mm) mounting pad layout .016 ( 0.4) .056 ( 1.43 ) .037( 0.95) .037( 0.95) ma x. .004 ( 0.1) .12 2 ( 3.1) .016 ( 0.4) .016 ( 0.4) 1 2 3 .102 ( 2.6) .007 ( 0.17 5) .045 ( 1.15) .110 (2.8) .052 ( 1.33 ) .005 ( 0.125) .094 ( 2.4) .037 ( 0.95) top view 17418 0.079 (2.0) 0.037 (0.95) 0.035 (0.9) 0.031 (0.8) 0.037 (0.95) 17417
www.vishay.com 10 document number 85765 rev. 1.3, 06-oct-03 vishay dz23 series vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany telephone: 49 (0)7131 67 2831, fax number: 49 (0)7131 67 2423
|
