spec no: dsae5151 rev no: v.5 date: mar/18/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:12 03003728 package dimensions attention observe precautions for handling electrostatic discharge sensitive device s description the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. ap1608pbc/a blue notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. 1.6x0.8mm smd chip led lamp features 1.6mmx0.8mm smt led, 1.1mm thickness. low power consumption. w ide view ing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . rohs compliant.
spec no: dsae5151 rev no: v.5 date: mar/18/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:12 03003728 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. note: 1. 1/10 duty cycle, 0.1ms pulse width. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 ap1608pbc/a blue (ingan) water clear 18 60 120 symbol parameter device typ. max. test conditions units peak peak wavelength blue 463 nm i f =20ma d dominant wavelength blue 465 nm i f =20ma ? 1/2 spectral line half - width blue 21 nm i f =20ma c capacitance blue 100 pf v f =0v;f=1mhz v f forward voltage blue 3.3 3.8 v i f =20ma i r reverse current blue 10 ua v r = 5v parameter blue units power dissipation 110 mw dc forward current 30 ma peak forward current [1] 100 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsae5151 rev no: v.5 date: mar/18/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:12 03003728 blue ap1608pbc/a
spec no: dsae5151 rev no: v.5 date: mar/18/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:12 03003728 ap1608pbc/a recommended soldering pattern (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm)
|
