View KEY-15S-2A1E14-23_6733930.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 dy jk series subminiature connector crimp style plug and socket connector part name material and finish plug socket contact insulator shell contact insulator shell brass, nickel-undercoated, mating part; gpld-plated crimping part; tin-plated (reflow treatment) steel, copper-undercoated, nickel-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated phosphor bronze, nickel-undercoated, mating part; gpld-plated crimping part; tin-plated (reflow treatment) glass-filled pbt, ul94-0, black 1.0a, ac, dc(awg #24) 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) initial value/15m max. after environmental testing/30m max. 5,000m min. 1,000v ac/minute current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage jk s p 2 1 40 ke c15p contact ?series name ?product shape: s ... chain, b ... loose piece ?type of contact: p ... pin contact, s ... socket contact ?applicable wire: 2 ... awg #28 to #24 ?material: 1 ... brass(pin contact), 3 ... phosphor bronze(socket contact) ?finish of mating part 40 ... gold-plated (flash) 42 ... 0.2micron gold-plated 43 ... 0.4micron gold-plated 43 ... 0.76micron gold-plated note: contact jst for special plating requirements. 3 housing ?series name ?shell size: e ?wire connection style: c ... crimp style ?number of circuits: 15 ?connector type: p ... plug, s ... socket ?plating specification of shell: 3 ?opper-undercoated, nickel-plated crimp style plug and socket pin contact socket contact crimp style plug crimp style socket specifications ?the dimples in the shell provide the ground connection and are an important factor in preventing electromagnetic interference. ?the contact has a retention lance that makes assembly to the housing smooth and secure. features standards 0 recognized e60389 1 certified lr20812 * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. model number identification materials characteristics note: contact jst for details. 0 1
2 d subminiature connector jk series 16.3 1.4 1.7 3.6 4.25 0.76 2.0 16.2 1.42 1.7 3.6 1.0 1.5 5.95 10.8 10.7 12.55 8.35 7.0 16.92 10 24.99 30.8 3.05 1.98 1.98 6.18 10.9 10.7 12.55 7.9 7.0 16.34 1.98 1.98 24.99 30.8 3.05 10 finish at mating part gold-plated (flash) gold-plated 0.76micron qty / box model no. pin contact applicable wire socket contact awg # lnsulation o.d. (mm) 28?24 ? jk-sp2140 jk-sp2144 jk-ss2340 jk-ss2344 model no. qty / box circuits kec-15p-3 model no. qty / box circuits kec-15s-3 pin contact (for plug housing) socket contact (for socket housing) plug housing receptacle housing rohs compliance this product displays (lf)(sn) on a label. rohs compliance rohs compliance crimp applicator applicator dies crimp applicator with dies crimping machine note: *strip-crimp applicator contact j-sp2*** j-ss2*** ap-k2n mks-l *mks-sc-jk mks-l *mks-sc-jk mk/jk-sp/ss2 sc/jk-sp/ss2 mk/jk-sp/ss2 sc/jk-sp/ss2 aplmk jk-sp/ss2 aplsc jk-sp/ss2 aplmk jk-sp/ss2 aplsc jk-sp/ss2 crimping machine, applicator
3 right angle through-hole plug and socket dy jk series subminiature connector part name material and finish contact insulator shell grounding adapter having a 3.2mm dia. hole grounding adapter having an m3 tapped hole grounding adapter having a spring lock device phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated brass, nickel-undercoated, tin/copper alloy-plated 1.0a, ac, dc 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) 5,000m min. 1,000v ac/minute 1.6mm initial value/15m max. after environmental testing/30m max. current rating voltage rating temperature range contact resistance insulation resistance withstandhing voltage applicable pc board thickness pc board edge max. ? ? ? ? ? ? ? 10 3 ? ? ? ? right angle through-hole socket specifications ?the mating section of the contact has a twin-contact style construction with uniform elasticity to ensure a reliable contact even when repeatedly mated and unmated. ?a wide variety of grounding adapters are available so that the receptacle can be grounded to the circuitry of a printed circuit board to prevent electromagnetic interference. features standards 0 recognized e60389 1 certified lr20812 * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. (with hexagonal lock screw blocks) (with rectangular lock screw blocks) note: contact jst for details. materials characteristics note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. pc board layout (viewed from component side) 0 1
4 d subminiature connector jk series ?series name ?shell size: e ?wire connection type: y ... right angle through-hole style ?number of circuits: 15 ?connector type: s ... socket ?connector construction/dimensions: standard of the series ?types of grounding adapters 0 ... without grounding adapters 1 ... with grounding adapters having a 3.2mm dia. hole 2 ... with grounding adapters having an m3 thread 3 ... with grounding adapters having a spring lock device (1) 4 ... with grounding adapters having a spring lock device (2) ?types of lock screw blocks a ... with hexagonal lock screw blocks having a no. 4-40unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread c ... with rectangular lock screw blocks having an m2.6 thread d ... without lock screw blocks e ... without lock screw blocks, but with grounding adapters having a 3.05mm dia. hole f ... without lock screw blocks, but with grounding adapters having a no. 4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread ?finish of mating part blank ... gold-plated (flash) 12 ... 0.2micron gold-plated 13 ... 0.4micron gold-plated 14 ... 0.76micron gold-plated ?blocked hole for keying ... blank: all holes open, 23: #9 hole blocked e y 15 s 2a 3 a 14 23 k model number identification note: contact jst for special plating requirements.
5 d subminiature connector jk series type a type b right angle through-hole socket 0a 1a 2a 3a ? 6.18 12.6 7.9 16.34 1.98 24.99 30.8 3.2 no.9 hole 0.75 22.22 h 11.43 8.89 2.54 2.54 0.6 10 1.98 without grounding adapters with grounding adapters with a 3.2mm dia. hole with grounding adapters with an m3 thread with grounding adapters with a spring lock lever (1) with grounding adapters with a spring lock device (2) h: height of the lock screw block (for types a, b & c) rohs compliance this product displays (lf)(sn) on a label. note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 15-circuit gold-plated (flash) socket with hexagonal lock screw blocks having a no. 4-40unc inch thread and without grounding adapters is required, specify the model number as key-15s-2a0a. ( ? ) type c...60 with hexagonal lock screw blocks(h: 6.3mm) having a no.4-40unc inch thread with hexagonal lock screw blocks(h: 6.3mm) having an m2.6 thread 0b 1b 2b 3b ? no.4-40unc m2.6 qty / box circuits model no. gold-plated (flash) socket gold-plated (0.76micron)socket with no.9 hole blocked key-15s-2a** ? key-15s-2a**14-23
6 m2.6 3.05 no.4-40unc m2.6 type c type d type e type f type g type h with rectangular lock screw blocks (h: 6.2mm) having an m2.6 thread without lock screw blocks used a lock screw block [model number kfs-( )s-c1n] *1: no.4-40unc inch thread *2: model number kfs-4s-( )1w(m) *1: m2.6 thread *2: model number kfs-2.6s-( )1w(m) *1: m3 thread *2: model number kfs-3s-( )1w(m) without lock screw blocks e: grounding adapter has no thread. f, g, h: grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) 0c 1c 2c 3c ? 0d 1d 2d 3d ? ? 1e 2e 3e ? ? 1f 2f 3f ? ? 1g 2g 3g ? ? ? ? ? 4h m3 d subminiature connector jk series
7 7 7 no.4-40unc type a straight through-hole socket 3a 2.5 12.6 7.9 16.34 24.99 30.8 no.9 hole 6.94 h 21.28 3.5 11.6 3.2 10.7 1.98 1.98 10 1.98 1.98 6.18 0.45 with grounding adapters with a spring lock device h: height of the lock screw block (for types a & b) rohs compliance this product displays (lf)(sn) a on a label. note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 15- circuits gold-plated (flash) socket with hexagonal lock screw blocks having a no. 4-40unc inch thread and with grounding adapters having a spring lock device is required, specify the model number as kes-15s-2a3a. with hexagonal lock screw blocks (h: 6.3mm) having a no.4-40unc inch thread qty / box circuits model no. gold-plated (flash) socket gold-plated (0.76micron)socket with no.9 hole blocked kes-15s-2a** kes-15s-2a**14-23 straight through-hole socket dy jk series subminiature connector straight through-hole socket ?the mating section of the contact has a twin-contact style construction with uniform elasticity to ensure a reliable contact even when repeatedly mated and unmated. ?a grounding adapter with a spring lock device allows the connector to be temporarily secured on the printed circuit board so that the connector can be soldered easily. features (with hexagonal lock screw blocks) (without lock screw blocks) 0 1
8 m2.6 m3 type b type d type f type g type h 3b 3d with hexagonal lock screw blocks (h: 6.3mm) having an m2.6 thread *1: no.4-40unc inch thread *2: model number jfs-4s-( )1w(m) without lock screw blocks f, g, h:grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) without lock screw blocks no.4-40unc 3f *1: m2.6 thread *2: model number jfs-2.6s-( )1w(m) m2.6 3g *1: m3 thread *2: model number jfs-3s-( )1w(m) 3h part name material and finish contact insulator shell grounding adapter phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated brass, nickel-undercoated, tin/copper alloy-plated 1.0a, ac, dc 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) 5,000m min. 1,000v ac/minute 1.6mm initial value/15m max. after environmental testing/30m max. current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness ?series name ?shell size: e ?wire connection type: s ... straight through-hole type ?number of circuits: 15 ?connector type: s ... socket ?connector construction/dimensions: standard jk series straight through-hole type ?type of grounding adapters 3 ... with grounding adapters having a spring lock device ?type of lock screw blocks a ... with hexagonal lock screw blocks having a no. 4-40unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread d ... without lock screw blocks f ... without lock screw blocks, but with grounding adapters having a no. 4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread ?finish of mating part blank ... gold-plated (flash) 12 ... 0.2micron gold-plated 13 ... 0.4micron gold-plated 14 ... 0.76micron gold-plated ?blocked hole for keying ... blank: all holes open, 23: #9 hole blocked k e s 15 s 2a 3a 14 23 d subminiature connector jk series ? ? ? ? ? ? ? ? 10 3 ? ? ? ? specifications model number identification materials characteristics note: contact jst for details. note: contact jst for special plating requirements. standards 0 recognized e60389 1 certified lr20812 note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. pc board layout (viewed from component side) and panel layout
accessories/emi prevention shielding cover ( j cover) dy j&jk series subminiature connector - 8 j series jk series model no. model no. cir- cuits cir- cuits dimensions (mm) 8- q'ty / box material and finish j-sc9a j-sc15a j-sc25a j-sc37a jk-sc15a steel, copper- undercoated, nickel-plated circuits j series jk series ? ? ? cable outer diameter (mm) $pwfsovu $pwfs - 8 3.0 circuits j series jk series q'ty / box model no. dimensions (mm) 8 - material and finish j-sc9b j-sc15b j-sc25b j-sc37b steel, copper-undercoated, nickel-plated 1 j cover ? t his shielding cover is made of steel, formed by our advanced stamping technology, and nickel-plated. ? the box-shaped cover completely encloses such emi radiating areas as the connections between the connector and wires. the result is a superior shielding effect. ? to install the shielding cover, simply align and press the upper and lower cover elements, then tighten the nuts. it then securely grips the round cables. ? this cover is so compact, light and sturdy, that it can be used to cover the connectors of any input/output cable. moreover, it is attractive in appearance. features rohs compliance note: the cover of the jk series 15-circuit connector is the same as that of the j series 9-circuit connector, except for the number of circuits indicated. rohs compliance note: the cover of the jk series 15-circuit connector is the same as that of the j series 9-circuit connector. applicable cable dimensions * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 j cover shielding cover a shielding cover b 0
2 d subminiature connector j&jk series - % e cir- cuits q'ty / box material model no. %e - j-cn9~15 j-cn25 j-cn37 glass-filled, pbt, ul94v-0, black 5.0 16.4 thickness 0.4 material model no. q'ty / box j-er stainless steel no.4-40unc 5.7 4.5 1.7 2.7 m2.6 5.7 4.5 1.7 2.7 m3 5.7 4.5 1.7 2.7 lock screw no.4-40unc (inch thread) m2.6 (metric thread) m3 (metric thread) model no. type of screw q'ty / box material and finish no.4-40unc (inch thread) m2.6 (metric thread) m3 (metric thread) j-sl-1c j-sl-2c j-sl-3c steel, copper-undercoated, nickel-plated j series model no. circuits model no. circuits jk series parts in one set q'ty / box j-c9-( )c j-c15-( )c j-c25-( )c j-c37-( )c jk-c15-( )c shielding cover a shielding cover b cover nut lock screw e-ring 1 pc. 1 pc. 1 pc. 2 pcs. 1 set rohs compliance note: in the above lock screw model numbers, the number in parentheses indicates the type of screw-1: inch thread (no.4-40unc), 2: metric thread (m2.6), 3: metric thread (m3). rohs compliance note: the cover nuts, lock screws and e-rings are used with both the j and jk series connectors. rohs compliance rohs compliance cover nut e-ring use the following model nos. when ordering j-covers as a set.
d subminiature connector j&jk series e-ring connector lock screw cover nut copper foil tape meshed wire shielding cover a lance shielding cover b " $ # wire " $ # e-ring contact shielding cover b lock screw cover nut copper foil tape meshed wire crimp style plug shielding cover a lance wire circuits j series jk series dimensions (mm) " #$ 3 j-cover assembly procedure j series jk series assembly procedure 1. connect wires to the connector by soldering or crimping. 2. fold back the braided shielding wire along the outside insulation and wind the copper foil tape around the shielding wire. 3. install the connector into shielding cover a. 4. screw the lock screws onto shielding cover b. 5. install the e-rings. 6. align shielding cover b with shielding cover a and press shielding cover b until it engages the lances of shielding cover a. 7. tighten the cover nut until the predetermined position is reached. note: for details of the j-cover assembly procedure, please refer to the processing specifications separately available. the shielding effect of the j-cover is critically dependent on proper assembly. dimensions after assembly
4 j-mc25b-4 jk-mc15a-3 j-mc15a j-mc25a-4 mold cover a mold cover b *dimensions in ( ) are those for the j-mc15a. *dimensions in ( ) are those for the j-mc15b. 18.0 37.0(37.6) 7.82.7 16.2(24.4) 18.0 17.4(25.6) 7.42.7 37.0(37.6) 18.0 38.0 39.0 7.82.7 18.0 39.2 39.0 2.7 7.4 circuits j series jk series cable o.d.(mm) ? ? ? l d t circuits j series jk series dimensions (mm) % 5 - ferrule ~ " # " # jk-mc15b-3 j-mc15b accessories/emi prevention overmolding cover dy j&jk series subminiature connector ?this cover completely encloses all wire connections to the connector, and its braided wire crimp section ensures a reliable ground connection. the result is excellent shielding. ? this cover is sturdy enough to withstand the high pressure necessary during overmolding. it can thus be finish-molded directly . features note: contact jst for cables other than those listed above. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. applicable cable diameter rohs compliance mold cover ferrule rohs compliance
j series circuits jk series material and finish q'ty / box or bag model no. parts name mold cover a mold cover b ferrule a ferrule b mold cover a mold cover b ferrule a ferrule b mold cover a mold cover b ferrule a ferrule b jk-mc15a-3 jk-mc15b-3 jk-fl15a-8.0c jk-fl15b-11.3 j-mc15a j-mc15b j-fl15a-7.0c j-fl15b-10.5 j-mc25a-4 j-mc25b-4 jk-fl15a-8.0c jk-fl15b-11.3 steel, copper-undercoated, nickel-plated copper, tin-plated steel, copper-undercoated, nickel-plated copper, tin-plated steel, copper-undercoated, nickel-plated copper, tin-plated mold cover a mold cover b contact crimp style plug ferrule b ferrule a copper foil tape braided wire mold mold cover assembly thumb screw d subminiature connector j&jk series 5 crimping machine crimp applicator applicator dies crimp applicator with dies assembly procedure 1. processing braided shielding wire pass the cable through ferrule b and remove the insulation at the end of the cable. install ferrule a and fold back the braided shielding wire along the outside insulation. then wind the copper foil tape around the shielding wire. 2. connecting the wires to the contacts connect the wires to the contacts by crimping and insert the contacts into the housing. 3. assembling the mold covers align mold cover b with mold cover a and press mold cover b until it engages the lances of mold cover a. install ferrule b over the cable holding section of the cover assembly and crimp ferrule b. this completes the assembly. note: contact jst for thumb screws. rohs compliance contact jk-fl15b-11.3 j-fl15b-10.5 ap-k2n mks-l-rg mk/jk-mc15 mk/j-mc15 aplmk jk-mc15 aplsc jk-mc15 mold cover assembly procedure crimping machine, applicator
no.4-40unc no.4-40unc 4.78 no.4-40unc l h l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension h (mm) type attachment q'ty / box jfs-4s-c1n jfs-4s-b1w jfs-4s-c1w jfs-4s-b1wm jfs-4s-c1wm kfs-4s-c1n kfs-4s-b1w kfs-4s-c1w kfs-4s-b1wm kfs-4s-c1wm hfs-4s-b1w hfs-4s-c1w hfs-4s-b1wm hfs-4s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc. spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-4s-b1w sfs-4s-c1w sfs-4s-b1wm sfs-4s-c1wm dimension / model no. dimension l (mm) model no. m3 m3 l h 4.78 m3 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension / model no. dimension l (mm) model no. dimension h (mm) type attachment q'ty / box jfs-3s-c1n jfs-3s-b1w jfs-3s-c1w jfs-3s-b1wm jfs-3s-c1wm kfs-3s-c1n kfs-3s-b1w kfs-3s-c1w kfs-3s-b1wm kfs-3s-c1wm hfs-3s-b1w hfs-3s-c1w hfs-3s-b1wm hfs-3s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc. spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-3s-b1w sfs-3s-c1w sfs-3s-b1wm sfs-3s-c1wm accessories/lock screw block dyy j jh jk & kh series subminiature connector 1 a varietly of accessories are available for the d subminiature connectors. hexagonal lock screw block (metric thread: m3) type a type b hexagonal lock screw block (inch thread: no.4-40unc) rohs compliance lock screw block type a type b rohs compliance
2 d subminiature connector j jh jk & kh series m2.6 m2.6 l h 4.78 m2.6 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension h (mm) type attachment qty / box jfs-2.6s-c1n jfs-2.6s-b1w jfs-2.6s-c1w jfs-2.6s-b1wm jfs-2.6s-c1wm kfs-2.6s-c1n kfs-2.6s-b1w kfs-2.6s-c1w kfs-2.6s-b1wm kfs-2.6s-c1wm hfs-2.6s-b1w hfs-2.6s-c1w hfs-2.6s-b1wm hfs-2.6s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc. spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-2.6s-b1w sfs-2.6s-c1w sfs-2.6s-b1wm sfs-2.6s-c1wm dimension / model no. dimension l (mm) model no. 1.2 1.0 6.1 6.2 1.0 12.5 m2.6 model no. qty / box attachment jfs-2.6r-n spring washer ?1 pc. set screw ?1 pc. hexagonal lock screw block (metric thread: m2.6) rectangular lock screw block (metric thread: m2.6) type a type b rohs compliance rohs compliance
d subminiature connector j jh jk & kh series total dimension 6.2 height of lock screw block 4.8 panel thickness 0.8 spring washer thickness 0.6 connector flange grounding adapter with threads pc board j k dces jst 18.0 9.6 6.6 j k dces-1 jst 18.0 9.6 7.4 25.0 33.0 3.0 circuits j series jk series qty / box material model no. type j-dces j-dces-1 " # pa, ul94v-0, black applicable connector model no. j series jk series plug receptacle dej-0.3 kej-0.7 kej-0.4 3 application examples of hexagonal lock screw blocks ?the resulting total dimension from the connector flange to the top of the hexagonal lock screw block must be 6.2mm after assembly. ?the d subminiature connector can be installed on the panel by simply tightening the hexagonal lock screw block together with grounding adapter, which has an identical thread to that of the f, g, and h types. with this tool, contacts (connected to wires by crimping) can be easily removed if they are improperly inserted into plug and receptacle housings. type a type b rohs compliance dust cover (for receptacles) extraction tool

▲Up To Search▲

Price & Availability of KEY-15S-2A1E14-23

	To Download KEY-15S-2A1E14-23 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .