he classification pre-tension and kick-off mechanism tv-15, 30 amp (1 form a) po wer relay he relays type pc board plug-in tm screw terminal operating funciton single side stable contact arrangement 1 form a 1 form a 2 form a 1 form a 2 form a 1 form a 2 form a vde 1 form a plug-in type features 1. excellent resistance to contact welding owing to the pre-tension and kick-off mechanism, the 1 form a passes tv-15 and the 2 form a passes tv-10. 2. high-capacity and long life 3. excellent surge resistance between contacts and coil, the surge voltage is more than 10,000 v (when surge waveform accords with jec-212-1981). 4. compatible with all major safety standards ul, csa, vde and t?v certi?d typical applications 1. of?e equipment copiers, package air conditioners, automatic vending machines. 2. industrial equipment machine tools, molding equipment, wrapping machines, food processing equipment, etc. 3. home appliances air conditioners, microwave ovens, televisions, stereo systems, water heaters and air heating equipment. contact arrangement 1 form a type 2 form a type contact capacity 30a 20a electrical life (at 20 cpm) 2 10 5 mechanical life (at 180 cpm) dc type: 10 7 , ac type: 5 10 6 type single side stable type he 1 form a, 2 form a insulation gap min. 8 mm distance between contacts* 1 form a and 2 form a: min. 3 mm pc board type: min. 2.5 mm breakdown voltage between open contacts 2, 000 vrms for 1 min. between contact and coil 5, 000 vrms for 1 min. 1. pre-tension mechanism before operation, the moving spring is pre-tensioned by being held down by a moving plate. as a result, at the on moment, with little follow, contact pressure is ensured with low bounce. 2. kick-off mechanism even when contact welding has occurred, at the moment of return, the moving plate taps the moving spring (kick-off) and, in effect, works to tear the weld apart, thus improving resistance to welding. 1 form a 2 form a electrical life 30 a 277 v ac, 10 5 30 a 250 v ac, 20 5 25 a 277 v ac, 10 5 20 a 250 v ac, 20 5 tv rating tv-15 tv-10 pre-tension moving plate at operation contact follow stroke direction of operation contact pressure 0 he relay (with pre-tension) ordinary relay (without pre-tension) kick-off gap moving plate at return all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. compliance with rohs directive
he ordering information types 1. pc board type (1 form a, dc coil) (single side stable) 2. plug-in type (single side stable) 3. tm type (single side stable) coil voltage 1 form a packing quantity pa rt no. carton case 6v dc he1an-p-dc6v 25 pcs. 100 pcs. 12v dc he1an-p-dc12v 24v dc he1an-p-dc24v 48v dc he1an-p-dc48v 100v dc he1an-p-dc100v 110v dc he1an-p-dc110v type coil voltage 1 form a 2 form a packing quantity pa rt no. part no. carton case dc type 6v dc he1an-dc6v he2an-dc6v 20 pcs. 100 pcs. 12v dc he1an-dc12v he2an-dc12v 24v dc he1an-dc24v he2an-dc24v 48v dc he1an-dc48v he2an-dc48v 100v dc he1an-dc100v he2an-dc100v 110v dc he1an-dc110v HE2AN-DC110V ac type 12v ac he1an-ac12v he2an-ac12v 20 pcs. 100 pcs. 24v ac he1an-ac24v he2an-ac24v 48v ac he1an-ac48v he2an-ac48v 100/120v ac he1an-ac100v he2an-ac100v 200/240v ac he1an-ac200v he2an-ac200v type coil voltage 1 form a 2 form a packing quantity pa rt no. part no. carton case dc type 6v dc he1an-q-dc6v he2an-q-dc6v 20 pcs. 100 pcs. 12v dc he1an-q-dc12v he2an-q-dc12v 24v dc he1an-q-dc24v he2an-q-dc24v 48v dc he1an-q-dc48v he2an-q-dc48v 100v dc he1an-q-dc100v he2an-q-dc100v 110v dc he1an-q-dc110v he2an-q-dc110v ac type 12v ac he1an-q-ac12v he2an-q-ac12v 20 pcs. 100 pcs. 24v ac he1an-q-ac24v he2an-q-ac24v 48v ac he1an-q-ac48v he2an-q-ac48v 100/120v ac he1an-q-ac100v he2an-q-ac100v 200/240v ac he1an-q-ac200v he2an-q-ac200v he relay contact arrangement 1a: 1 form a (single side stable type) 2a: 2 form a (single side stable type) he pick-up voltage n: 70% of nominal voltage terminals nil: s: q: p: plug-in type screw terminal type tm type pc board type coil voltage dc ac 6, 12, 24, 48, 100, 110 v 12, 24, 48, 100 (100/120), 200 (200/240) v all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he 4. screw terminal type (single side stable) note: the tm type of the screw terminals are also available. rating 1. coil data 1) ac coils 2) dc coils type coil voltage 1 form a 2 form a packing quantity pa rt no. part no. carton case dc type 6v dc he1an-s-dc6v he2an-s-dc6v 10 pcs. 50 pcs. 12v dc he1an-s-dc12v he2an-s-dc12v 24v dc he1an-s-dc24v he2an-s-dc24v 48v dc he1an-s-dc48v he2an-s-dc48v 100v dc he1an-s-dc100v he2an-s-dc100v 110v dc he1an-s-dc110v he2an-s-dc110v ac type 12v ac he1an-s-ac12v he2an-s-ac12v 10 pcs. 50 pcs. 24v ac he1an-s-ac24v he2an-s-ac24v 48v ac he1an-s-ac48v he2an-s-ac48v 100/120v ac he1an-s-ac100v he2an-s-ac100v 200/240v ac he1an-s-ac200v he2an-s-ac200v coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) nominal operating power max. allowable voltage (at 20 c 68 f ) 12v ac 70%v or less of nominal voltage (initial) 15%v or more of nominal voltage (initial) 138ma 1.7va 110%v of nominal voltage 24v ac 74ma 1.8va 48v ac 39ma 1.9va 100/120v ac 18.7 to 2.1ma 1.9 to 2.7va 200/240v ac 9.1 to 10.8ma 1.8 to 2.6va coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. allowable voltage (at 55 c 131 f ) 6v dc 70%v or less of nominal voltage (initial) 10%v or more of nominal voltage (initial) 320ma 18.8 ? 1.92w 110%v of nominal voltage 12v dc 160ma 75 ? 1.92w 24v dc 80ma 300 ? 1.92w 48v dc 40ma 1,200 ? 1.92w 100v dc 19ma 5,200 ? 1.92w 110v dc 18ma 6,300 ? 1.92w all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he 2. speci?ations notes: *1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3 re f er to 6. conditions f or ope r ation, t r anspo r t and sto r age mentioned in ambient envi r onment . reference data 1 form a type characteristics item speci?ations contact arrangement 1 form a 2 form a initial contact resistance, max max. 100 m ? (by voltage drop 6 v dc 1a) contact material agsno 2 type rating nominal switching capacity (resistive load) 30a 277v ac 25a 277v ac max. switching power 8,310va 6,925va max. switching voltage 277v ac, 30v dc max. switching current 30a 25a nominal operating power dc: 1.92w, ac: 1.7 to 2.7va min. switching capacity (reference value)* 1 100ma 5v dc electrical characteristics insulation resistance (initial) min. 1,000m ? (at 500v dc) measurement at same location as ?nitial breakdown voltage section. breakdown voltage (initial) between open contacts 2,000 vrms for 1min (detection current: 10ma.) between contact sets 4,000 vrms for 1min (detection current: 10ma.) between contact and coil 5,000 vrms for 1min (detection current: 10ma.) surge breakdown voltage* 2 (between contact and coil) min. 10,000v (initial) temperature rise dc: max. 60 c (at 55 c) (by resistive method), ac: max. 65 c (at 55 c) (by resistive method) operate time (at nominal voltage) max. 30ms (excluding contact bounce time) release time (at nominal voltage) dc: max.10ms (excluding contact bounce time, without diode), ac : max. 30ms (excluding contact bounce time) mechanical characteristics shock resistance functional min. 98 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive min. 980 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 1.5 mm expected life mechanical dc: min. 10 7 (at 180 cpm), ac: min. 5 10 6 (at 180 cpm) electrical (resistive load) (at 20 cpm) min. 10 5 (30a 277v ac) min. 2 10 5 (30a 250v ac) min. 10 5 (25a 277v ac) min. 2 10 5 (20a 250v ac) conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 c to +55 c ?8 f to +131 f humidity: 5 to 85% r.h. (not freezing and condensing at low temperature), air pressure: 86 to 106kpa conditions for operation, transport and storage* 3 20 cpm (at max. rating) unit weight pc board type: approx. 80g 2.82oz , plug-in type/tm type: approx. 90g 3.17oz , screw terminal type: approx. 120g 4.23oz 1. maximum switching power 2 . life curve 3. coil temperature rise (dc type) measured portion: inside the coil contact current: 30 a 100 50 30 20 10 5 1 0.5 30 100 500 1,000 contact voltage, v contact current, a ac resistive dc resistive 10 5 100 50 1,000 500 30 3520 2510 1550 contact current, a no. of operations, 10 4 250 v ac resistive 30 v dc resistive 70 60 50 40 30 20 10 0 100 110 120 20 c 60 c coil applied voltage, %v temperature rise, c 40 c all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he 2 form a type dimensions (unit: mm inch ) 1. pc board type 4. ambient temperature characteristics tested sample: he1an-ac120v, 6 pcs. 30 40 60 8020 ?0 0?0?0 ?0 ?0 x x - - ambient temperature, c rate of change, % pick-up voltage drop-out voltage 20 10 1. maximum switching power 2 . life curve 3. coil temperature rise (dc type) measured portion: inside the coil contact current: 30 a 100 50 30 20 10 5 1 0.5 30 100 500 1,000 contact voltage, v contact current, a ac resistive dc resistive 10 5 100 50 1,000 500 30 3520 2510 1550 contact current, a no. of operations, 10 4 250 v ac resistive 30 v dc resistive 70 60 50 40 30 20 10 0 100 110 120 20 c 60 c 40 c coil applied voltage, %v temperature rise, c 4. ambient temperature characteristics tested sample: he2an-ac120v, 6 pcs. 40 60 8020 ?0 0?0?0 ?0 ?0 x - x - ambient temperature, c pick-up voltage drop-out voltage rate of change, % 20 10 1 form a external dimensions single side stable type general tolerance: 0.3 .012 38.0 1.496 36.3 1.429 .020 0.5 4 .157 4.7 .185 33 1.299 schematic (bottom view) single side stable type 14 56 pc board pattern (bottom view) 32 1.260 .331 8.4 18.6 .732 6-.079 dia. 6-2 dia. hole 24 .945 4.7 .185 tolerance: 0.1 .004 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he 2. plug-in type 3. tm type 1 form a external dimensions single side stable type 2-.177 dia. 2-4.5 dia. 14 56 r4 r.157 .138 3.5 .404.331 10.258.4 6.35 0.8 .250 .031 #250 tab terminal 33 1.299 10.4 .409 35 1.378 0.8 .031 36.4 1.433 40 50 1.575 1.969 general tolerance: 0.3 .012 schematic (bottom view) single side stable type panel cutout tolerance: 0.1 .004 14 56 2-.177 .004 dia. 2-4.5 0.1 dia. 40 0.1 1.575 .004 2 form a external dimensions single side stable type 2-.177 dia. 2-4.5 dia. 56 r4 r.157 33 1.299 36.4 1.433 40 50 1.575 1.969 12 34 .138 3.5 .404 .331 10.25 8.4 6.35 0.8 .250 .031 #250 tab terminal 35 1.378 0.8 .031 .567 14.4 10.4 .409 general tolerance: 0.3 .012 schematic (bottom view) single side stable type panel cutout tolerance: 0.1 .004 1 65 2 34 2-.177 .004 dia. 2-4.5 0.1 dia. 40 0.1 1.575 .004 external dimensions single side stable type 1 form a 2 form a general tolerance: 0.3 .012 14 5 6 r4 r.157 .138 3.5 .404 .331 10.25 8.4 6.35 4.5 .177 0.8 .250 .031 #250 tab terminal 33 1.299 10.4 .409 35 1.378 0.8 .031 36.4 1.433 50 40 47.6 1.874 60 1.969 1.575 2.362 .138 3.5 .404 .331 10.25 8.4 6.35 0.8 .250 .031 #250 tab terminal 10.4 .409 35 1.378 0.8 .031 14 3 5 6 r4 r.157 4.5 .177 2 33 1.299 36.4 1.433 14.4 .567 50 40 60 1.969 1.575 2.362 47.6 1.874 schematic (bottom view) single side stable type panel cutout tolerance: 0.1 .004 14 56 1 65 2 34 1 form a 2 form a 2-.177 .004 dia. 2-4.5 0.1 dia. 47.6 0.1 1.874 .004 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he 4. screw terminal type mounting method 1 form a external dimensions single side stable type 14.4 21.5 .846 17.5 .689 16.5 .650 33.5 1.319 m.138 m3.5 r4 r.157 2-.177 dia. 2-4.5 dia. m.177 m4.5 40.0 51.0 .567 1.575 2.008 50.0 1.969 .295 7.5 44.5 1.752 0.8 .031 .138 3.5 general tolerance: 0.3 .012 schematic (bottom view) single side stable type panel cutout tolerance: 0.1 .004 14 56 2-.177 .004 dia. 2-4.5 0.1 dia. 40 0.1 1.575 .004 2 form a external dimensions single side stable type 14.4 .567 21.5 .846 33.5 1.319 m.138 m3.5 2-.177 dia. 2-4.5 dia. m.157 m4.0 36.4 40.0 51.0 1.433 1.575 2.008 50.0 1.969 .295 7.5 .138 3.5 44.5 1.752 0.8 .031 17.5 .689 16.5 .650 r4 r.157 general tolerance: 0.3 .012 schematic (bottom view) single side stable type panel cutout tolerance: 0.1 .004 1 65 2 34 40 0.1 1.575 .004 2-.177 .004 dia. 2-4.5 0.1 dia. 1. plug-in type 2. screw terminal type 3. allowable installation wiring size for screw terminal types and terminal sockets due to the up terminals, it is possible to either directly connect the wires or use crimped terminal. m4 screw washer faston no. 250 m4 screw washer all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
he notes for cautions f or us e , see rel a y t e c hnical in f ormation . 1. the dust cover should not be removed since doing so may alter the characteristics. 2. avoid use under severe environmental conditions, such as high humidity, organic gas or in dust, oily locations and locations subjected to extremely frequent shock or vibrations. 3. when mounting, use spring washers. optimum fastening torque ranges from 49 to 68.6 n ? m (5 to 7 kgf?m). 4. firmly insert the receptacles so that there is no slack or looseness. to remove a receptacle, 19.6 to 39.2 n (2 to 4 kg) of pulling strength is required. do not remove more than one receptacle at one time. always remove one receptacle at a time and pull it straight outwards. 5. when using the ac type, the operate time due to the in-rush phase is 20 ms or more. therefore, it is necessary for you to ver ify the characteristics for your actual circuit. 6. when using the push-on blocks for the screw terminal type, use crimped terminals and tighten the screw-down terminals to the torque below. m4.5 screw: 147 to 166.6 n ? cm (15 to 17 kgf?m) m4 screw: 117.6 to 137 n?m (12 to 14 kgf?m) m3.5 screw: 78.4 to 98 n?m (8 to 10 kgf?m) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
