b214 df20a-**ds-1c socket df20f(g)-**dp-1v pin header df20f-****scfa contact 1 narrower external width and length metal fitting features 1. contact pitch 1 mm contact pitch allows reliable solder and cable termination. 2. reliable electrical connection wipe effective electrical connection is assured with a 1mm wipe of mating contacts. 3. narrower external width and length redesigned metal fittings decreased the overall length of the board- mount receptacle and permit end-to-end mounting of several connectors. 4. automatic equipment board placement straight type pin headers are supplied with a 5.4 mm x 4.6mm flat platform to allow vacuum pick-up and placement on the board . 5. product variations (1) available with 10, 20, 30, 40, and 50 contacts. (2) pin headers are available in two types: with or without board positioning bosses. (3) depending on specific application pin headers can be ordered in straight or right angle types. applications notebook pc, small office automation equipment, small consumer devices, portable devices. any application requiring low profile reliable board-to-cable connection with a awg #28, awg#30, awg#32 conductors. 1mm pitch, double rows 1 mm pitch double rows low profile board-to-cable connectors df20 series 6.2 5.5 df20f **dp-1h(59) df20a- **ds-1c cable socket pcb cable pcb 5.4 socket df20a- **ds-1c pin header pin header 5.8 df20f(g)- **dp-1v(56) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b215 b215 product specifications rating rated current rated voltage awg#28 : 1a awg#30 : 0.9a awg#32 : 0.7a 100v ac operating temperature range operating humidity range storage temperature range storage humidity range -35? to 85? (note 1,2) - 40% to 80% -10? to 60? (note 2) - 40% to 70% measured at 100v dc conduction of 300v ac applied for 1 minute measure at 100ma. measured with a steel pin of 0.2 ?.005 thickness frequency of 10 to 55 hz, single amplitude of 0.75 mm, in 3 directions for 2hours temperature of 40 2 ? , humidity of 90% to 95%, left standing for 96 hours (-55 ? :30min / 5 ? to 35 ? : 2 to 3min / 85 ? :30min / 5 ? to 35 ? :2 to 3min ) for 5 cycles 50 cycles reflow: at the recommended temperature profile, manual solder: soldering iron temperature of 300? for 3 seconds 500m ? min. no flashover or insulation breakdown 30m ? max. 0.2 n min., 2 n max. no electrical discontinuity of 1? min. contact resistance of 30m ? max., insulation resistance of 100m ? min. contact resistance of 30m ? max ,insulation resistance of 500m ? min. contact resistance of 30m ? max. no deformation of the insulator parts that will affect performance 1. insulation resistance 2. withstanding voltage 3. contact resistance 4. insertion-extraction force 4. (per contact) 5.vibration 6.humidity 7. temperature cycle 8. mechanical operation 9. resistance to soldering heat item specifications conditions note1: includes temperature rise caused by current flow. note2: the term ?torage?refers to products stored for long periods of time prior to mounting and use. note2: operating temperature range and humidity range covers non-conducting conditions of installed connectors in storage, note2: shipment or transportation. materials remarks ul94v-0 ---------- ul94v-0 ---------- item part material finish socket socket contact pin header insulator contact insulator contact metal fitting polyamide phosphor bronze polyamide phosphor bronze brass color : beige gold plating color : beige gold plating v type: solder plating h type: tin-copper plating (pb free) ordering information df 20 # - * ds - 1 c 1 4 6 2 3 5 7 series name : df boss type pin header f: without boss g: with boss crimp socket: a 1 number of contacts: 10, 20, 30, 40, 50 2 3 4 5 series no. : 20 6 connector type ds: double-row socket dp: double-row pin header contact pitch: 1 mm type of housing, header c: crimp housing v: straight smt header h: right angle smt header connectors contacts 7 7 f applicable wire size 2830: awg #28 to 30 3032: awg #30 to 32 contact & packaging type scf: socket contact reel plating type a: gold plating packaging specifications blank: 1 reel = 10,000 pieces 41: 1 reel = 20,000 pieces df20 f - 2830 scf a ( ** ) 1 1 4 4 2 2 3 3 5 5 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b216 double row socket socket crimp contacts cl no. part number number of contacts a b rohs 686-0020-3 686-0021-6 686-0022-9 686-0023-1 686-0024-4 df20a-10ds-1c df20a-20ds-1c df20a-30ds-1c df20a-40ds-1c df20a-50ds-1c 10 20 30 40 50 1 7.2 12.2 17.2 22.2 27.2 1 4.0 1 9.0 14.0 19.0 24.0 yes [specifications number]-*, (**) (59): gold plating, embossed tape packaging cl no. product no. type of contacts quantity plating type rohs 686-0042-6- ** 686-0043-9- ** 686-0051-7- ** df20f-2830scfa ( ** ) df20f-3032scfa ( ** ) df20f-36scfa ( ** ) reel contacts see specifications number column gold plating yes contact no. * contact no. * 1 contact no. 1 contact no. 2 5th contact marking contact no. 1 mark 3.3 1.45 2 0.9 0.5 0.7 unit: mm note: sales quantities are by the package unit (containing 100 pieces). please order by package unit. shown with terminated and installed contacts type cl no. insulation crimper wire crimper insulation anvil and wire anvil 901-4572-6-61 901-4572-6-62 901-4572-6-63 product no. ap105-df20-2830s(61) ap105-df20-2830s(62) ap105-df20-2830s(63) replacement parts list for applicator [specifications number] -*, (**) (04): 10,000 pieces / reel (44): 20,000 pieces / reel applicable wire size (stranded wire conductor) jacket diameter awg #28 (7/0.127 mm) awg #30 (7/0.1 mm) awg #32 (7/0.08 mm) 0.5mm to 0.6 mm product no. type cl no. ap105-df20-2830s cm-105 applicator press 901-4572-6 901-0005-4 note 1: hirose electric will not be responsible for any problems caused by use of tools other than specified. note 2: the manual crimping tool can be also used for cutting-off individual contacts from the reel. note 3: customers that already have df13 series hirose? press units and applicators will be able to use them for df20 series crimp terminations by replacing of only crimper and anvil. note4: the crimping tool for the df20f-3032scfa can also be used with the df20f-2830scfa. note: when using other than the recommended wire, contact your nearest hirose representative. applicable wire (tin plated solid soft conductor) applicable crimping tools recommended wire ul1571 strip length 1.2 to 1.9 mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b217 double row straight pin header b pcb footprints d0.05 40.1 7.2 0.1 0.5 0.05 1.90.05 1.8 0.1 ?0.7 + 0.1 0 p=10.03 a 0.05 0.850.1 0.90.05 0.60.05 contact no.1 contact no.2 contact no. ** contact no. **-1 contact no.3 0.2 % $ 0.5 0.7 0.2 1.9 a ?? 4.6 5.4 6.4 p=1 contact no. 1 marking indication of number of contacts note 1:shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations. note 2: required only for pin headers supplied with the positioning boss. [specifications number]-*, (**) (56): gold plating, embossed tape packaging unit: mm note1: order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces) note2: vacuum pick-up cap are included with embossed tape packaged connectors. cl no. part number no. of contacts cl686-0032-2-56 cl686-0033-5-56 cl686-0034-8-56 cl686-0035-0-56 cl686-0036-3-56 cl686-0037-6-56 cl686-0038-9-56 cl686-0039-1-56 cl686-0040-0-56 cl686-0041-3-56 df20f -10dp-1v(56) df20f -20dp-1v(56) df20f -30dp-1v(56) df20f -40dp-1v(56) df20f -50dp-1v(56) df20g-10dp-1v(56) df20g-20dp-1v(56) df20g-30dp-1v(56) df20g-40dp-1v(56) df20g-50dp-1v(56) 10 20 30 40 50 10 20 30 40 50 a b c d remarks rohs 1 4.0 1 9.0 14.0 19.0 24.0 1 4.0 1 9.0 14.0 19.0 24.0 1 7.3 12.3 17.3 22.3 27.3 1 7.3 12.3 17.3 22.3 27.3 1 6.6 11.6 16.6 21.6 26.6 1 6.6 11.6 16.6 21.6 26.6 ---- ---- ---- ---- ---- 1 5.7 10.7 15.7 20.7 25.7 without boss yes with boss the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b218 double row right angle pin header b pcb footprints 3.8 0.05 2.45 +0.1 0 1.4 +0.1 0 1.4 +0.1 0 c 0.1 0.75 0.1 2.75 0.05 a 0.05 p= 0.03 0.6 0.05 1 b 5 a a 6.2 0.2 c 5.5 0.2 p= 1 * * indication of number of contacts contact no.2 contact no.1 contact no.1 marking contact no.3 contact no.** contact no.**-1 note : shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations. [specifications number]-*, (**) (59): gold plating, embossed tape packaging note:order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces) part number cl no. no. of contacts a b c remarks rohs df20f -10dp-1h(59) df20f -20dp-1h(59) df20f -30dp-1h(59) df20f -40dp-1h(59) 686-0027-2(59) 686-0028-5(59) 686-0029-8(59) 686-0030-7(59) 10 20 30 40 2 4.0 2 9.0 14.0 19.0 2 7.5 12.5 17.5 22.5 2 6.2 11.2 16.2 21.2 without boss yes unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b219 straight pin header b embossed carrier tape dimensions part number no. of contacts a b c d df20f(g)-10dp-1v(56) df20f(g)-20dp-1v(56) df20f(g)-30dp-1v(56) df20f(g)-40dp-1v(56) df20f(g)-50dp-1v(56) df20f - 10dp-1h(59) df20f - 20dp-1h(59) df20f - 30dp-1h(59) df20f - 40dp-1h(59) 10 20 30 40 50 10 20 30 40 16 24 32 44 44 16 24 32 44 -------- -------- 28.4 40.4 40.4 -------- -------- 28.4 40.4 1 7.5 11.5 14.2 20.2 20.2 1 7.5 11.5 14.2 20.2 16.4 24.4 32.4 44.4 44.4 16.4 24.4 32.4 44.4 b 0.1 r0.75 0.20.05 1.7 1.5 (0.4) (7.4) c 0.1 a 0.3 1.75 0.1 120.1 20.1 40.1 ?1.5 unreeling direction +0.1 0 +0.15 0 +0.1 0 2 0.5 product name label ?13 0.2 ?21 0.8 2 0.5 (?80) ?380 2 d ?1.5 mm diameter feed hole depth +2 0 b 0.1 r0.75 0.20.05 1.7 1.5 (0.4) (7.9) c 0.1 a 0.3 1.75 0.1 12 0.1 2 0.1 4 0.1 ?1.5 unreeling direction +0.15 0 +0.1 0 +0.1 0 right angle pin header reel dimensions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b220 b usage recommendation 1. recommended soldering temperature profile for ir reflow. 2. recommended manual soldering conditions 3. recommended solder screen thickness 4. board warping 5. cleaning conditions 6. wiring termination conditions 7. mating / un-mating precautions soldering temperature: 290? ?0?, soldering time: within 3 sec. 0.15mm maximum of 0.03 mm at the connector center section, with both ends of the connector as reference points. refer to "nylon connector use handbook." refer to "nylon connector use handbook." crimp contacts should be handled with care as not to cause any deformation or damage affecting the performance or termination. excessive twisting and pulling on wires during mating/un-mating should be avoided as it may cause damage to connectors. note 1: up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. note 2: the temperature indicates the board surface temperature at the points of contacts with the connector terminals. df20fC *dp C 1h(59) temperature 250 200 150 100 60 to 120(s) 60(s) max 220 240 60 120 180 240 300 10(s) max time(s) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
