Part Number Hot Search : 
D74ALVC 3296P VCS20AXT 58004 FIN1002 SA192 28DCL3 HCT9046A
Product Description
Full Text Search
 

To Download C-129-1250C-TDFB-SSC3 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  - 1 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver features z sc duplex single mode transceiver z industry standard 1x9 footprint z complies with ieee 802.3 gigabit ethernet z single +3.3v/5v power supply z operating temperature range 0 to 70oc z pecl differential inputs and outputs z pecl signal detection output [c-1xx-1250-tdfb(3)-ssc2(3/4)] z ttl signal detection output [c-1xx-1250c-tdfb(3)-ssc2(3/4)] z wave solderable and aqueous washable z uncooled laser diode with mqw structure z complies with telcordia (bellcore) gr-468-core z 1.25 gbps application z cwdm application z rohs compliance available table 1 ? absolute maximum rating parameter symbol min. typical max. unit notes power supply voltage vcc 0 - 6 v power supply voltage vcc 0 - 3.6 v output current i out - - 30 ma soldering temperature - - - 260 oc 1 storage temperature t stg -40 - 85 oc note 1: 10 seconds on leads only table 2 ? recommended operating condition parameter symbol min. typical max. unit notes power supply voltage vcc 4.75 5 5.25 v power supply voltage vcc 3.1 3.3 3.5 v operating temperature (case) t opr 0 - 70 oc 2 data rate dr - 1250 - mbps note 2: please refer to ordering information
- 2 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver table 3 ? transmitter specifications (optical) parameter symbol min. typical max. unit notes optical transmit power p o -5 - 0 dbm 3 optical transmit power p o -3 - +2 dbm 4 optical transmit power p o 0 - +5 dbm 5 output center wavelength -5.5 +7.5 nm 6 side mode suppression ratio sr 30 35 - db 7 output spectrum width ? - - 1 nm 8 extinction ratio er 9 - - db output eye compliant with ieee 802.3 optical rise/fall time t r /t f - - 0.26 ns 9 relative intensity noise rin - - -120 db/hz total jitter t j - - 0.27 ns 10 note 3: output power is coupled into a 9/125 m single mode fiber c-1xx-1250(c)-tdfb(3)-ssc2 note 4: output power is coupled into a 9/125 m single mode fiber c-1xx-1250(c)-tdfb(3)-ssc3 note 5: output power is coupled into a 9/125 m single mode fiber c-1xx-1250(c)-tdfb(3)-ssc4 note 6: =1xxx nm note 7: cw, p o =5mw note 8: -20 db width note 9: 20% to 80% values note 10: measured with 2 7 -1 prbs table 4 ? transmitter specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 260 ma 11 data input current-low i il -350 - - a data input current-high i ih - - 350 a differential input voltage v ih -v il 300 - - mv data input voltage-low v il -v cc -2.0 - -1.58 v data input voltage-high v ih -v cc -1.1 - -0.74 v 12 note 11: maximum current is specified at v cc = maximum @ maximum temperature note 12: these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs
- 3 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver table 5 ? receiver specifications (optical) parameter symbol min. typical max. unit notes sensitivity - - - -24 dbm 13 maximum input power p in -3 - - dbm signal detect-asserted pa - - -24 dbm 14 signal detect-deasserted pd -38 - - dbm 15 signal detect-hysteresis - 1 - - db wavelength of operation 1100 - 1620 nm note 13: measured with 2 7 -1 prbs, 10 -12 ber. note 14: measured on transition: low to high. note 15: measured on transition: high to low. table 6 ? receiver specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 100 ma 16 data output voltage-low v ol -v cc -2 - -1.58 v data output voltage-high v oh -v cc -1.1 - -0.74 v 17 signal detect output voltage-low v sdl -v cc -2 - -1.58 v signal detect output voltage-high v sdh -v cc -1.1 - -0.74 v 18 signal detect output voltage-low v sdl - - 0.5 v signal detect output voltage-high v sdh 2.0 - - v 19 note 16: the current excludes the output load current note 17: these outputs are compatible with 10k, 10kh and 100k ecl and lvpecl outputs. note 18: c-1xx-1250-tdfb(3)-ssc2(3/4). note 19: c-1xx-1250c-tdfb(3)-ssc2(3/4).
- 4 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver connection diagram table 7 ? pin definitions pin unit notes 1 rxgnd directly connect this pi n to the receiver ground plane 2 rd+ see recommended circuit schematic 3 rd- see recommended circuit schematic 4 sd active high on this indicates a received optical section 5 rxv cc dc power for the receiver section 6 txv cc dc power for the transmitter section 7 td- see recommended circuit schematic 8 td+ see recommended circuit schematic 9 txgnd directly connect this pin to the transmitter ground plane
- 5 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver recommended circuit schematic c-1xx-1250-tdfb(3)-ssc2(3/4) 1 2 3 4 5 97 86 rx vcc tx vcc transceiver top view no internal connection no internal connection c2 c1 c4 l2 c3 l1 rx vcc tx vcc vcc tx vcc rx vcc rd + rd - sd td + td - r8 r10 r9 r7 c6 c5 r1 r3 r2 r4 r5 r6 notes +3.3v: r1=r3=r5=r7=r9=130 r2=r4=r6=r8=r10=82 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h notes +5v: r1=r3=r5=r7=r9=82 r2=r4=r6=r8=r10=130 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h c-1xx-1250c-tdfb(3)-ssc2(3/4) 1 2 3 4 5 97 86 rx vcc tx vcc transceiver top view no internal connection no internal connection c2 c1 c4 l2 c3 l1 rx vcc tx vcc vcc tx vcc rx vcc rd + rd - sd td + td - r6 r8 r7 c6 c5 r1 r3 r2 r4 r5 notes +3.3v: r1=r3=r5=r7=130 r2=r4=r6=r8=82 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h notes +5v: r1=r3=r5=r7=82 r2=r4=r6=r8=130 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h the split-loaded terminations for ecl sign als need to be located at the input of devices receiving those ecl signals. the power supply filtering is required for good emi performan ce. use short tracks from the inductor l1/l2 to the module rx vcc. / tx vcc. a gnd plane under the module is required for good emi and sensitivity performance.
- 6 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver package diagram (10.4 mm sc transceiver assembly) c-1xx-1250(c)-tdfb(3)-ssc2(3/4) top view front view package diagram (9.8 mm sc transceiver assembly) c-1xx-1250(c)-tdfb(3)-ssc2(3/4)e rear view side view top view front view units: mm blank: black case units: mm e: blue case
- 7 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver order information table 8 ? order information part no. part no. part no. c-127-1250(c)-tdfb(3)-ssc2(e)(g5) c-127-1250(c)-tdfb( 3)-ssc3(e)(g5) c-127-1250(c)-tdfb(3)-ssc4(e)(g5) c-129-1250(c)-tdfb(3)-ssc2(e)(g5) c-129-1250(c)-tdfb( 3)-ssc3(e)(g5) c-129-1250(c)-tdfb(3)-ssc4(e)(g5) c-131-1250(c)-tdfb(3)-ssc2(e)(g5) c-131-1250(c)-tdfb( 3)-ssc3(e)(g5) c-131-1250(c)-tdfb(3)-ssc4(e)(g5) c-133-1250(c)-tdfb(3)-ssc2(e)(g5) c-133-1250(c)-tdfb( 3)-ssc3(e)(g5) c-133-1250(c)-tdfb(3)-ssc4(e)(g5) c-135-1250(c)-tdfb(3)-ssc2(e)(g5) c-135-1250(c)-tdfb( 3)-ssc3(e)(g5) c-135-1250(c)-tdfb(3)-ssc4(e)(g5) c-137-1250(c)-tdfb(3)-ssc2(e)(g5) c-137-1250(c)-tdfb( 3)-ssc3(e)(g5) c-137-1250(c)-tdfb(3)-ssc4(e)(g5) c-139-1250(c)-tdfb(3)-ssc2(e)(g5) c-139-1250(c)-tdfb( 3)-ssc3(e)(g5) c-139-1250(c)-tdfb(3)-ssc4(e)(g5) c-141-1250(c)-tdfb(3)-ssc2(e)(g5) c-141-1250(c)-tdfb( 3)-ssc3(e)(g5) c-141-1250(c)-tdfb(3)-ssc4(e)(g5) c-143-1250(c)-tdfb(3)-ssc2(e)(g5) c-143-1250(c)-tdfb( 3)-ssc3(e)(g5) c-143-1250(c)-tdfb(3)-ssc4(e)(g5) c-145-1250(c)-tdfb(3)-ssc2(e)(g5) c-145-1250(c)-tdfb( 3)-ssc3(e)(g5) c-145-1250(c)-tdfb(3)-ssc4(e)(g5) c-147-1250(c)-tdfb(3)-ssc2(e)(g5) c-147-1250(c)-tdfb( 3)-ssc3(e)(g5) c-147-1250(c)-tdfb(3)-ssc4(e)(g5) c-149-1250(c)-tdfb(3)-ssc2(e)(g5) c-149-1250(c)-tdfb( 3)-ssc3(e)(g5) c-149-1250(c)-tdfb(3)-ssc4(e)(g5) c-151-1250(c)-tdfb(3)-ssc2(e)(g5) c-151-1250(c)-tdfb( 3)-ssc3(e)(g5) c-151-1250(c)-tdfb(3)-ssc4(e)(g5) c-153-1250(c)-tdfb(3)-ssc2(e)(g5) c-153-1250(c)-tdfb( 3)-ssc3(e)(g5) c-153-1250(c)-tdfb(3)-ssc4(e)(g5) c-155-1250(c)-tdfb(3)-ssc2(e)(g5) c-155-1250(c)-tdfb( 3)-ssc3(e)(g5) c-155-1250(c)-tdfb(3)-ssc4(e)(g5) c-157-1250(c)-tdfb(3)-ssc2(e)(g5) c-157-1250(c)-tdfb( 3)-ssc3(e)(g5) c-157-1250(c)-tdfb(3)-ssc4(e)(g5) c-159-1250(c)-tdfb(3)-ssc2(e)(g5) c-159-1250(c)-tdfb( 3)-ssc3(e)(g5) c-159-1250(c)-tdfb(3)-ssc4(e)(g5) c-161-1250(c)-tdfb(3)-ssc2(e)(g5) c-161-1250(c)-tdfb( 3)-ssc3(e)(g5) c-161-1250(c)-tdfb(3)-ssc4(e)(g5)
- 8 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver part numbering definition: c - 1xx - 1250(c) - tdfb(3) - s sc txpo wer temperature an d package -rohs wavelength: tx wavelength = 1xx0 nm xx = 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61 communication protocol (1.25gbps) 1250 = pecl signal detection output 1250c = ttl signal detection output dfb laser transceiver tdfb = +5v transceiver, dfb tdfb3= +3.3v transceiver, dfb single mode fiber connector options tx power range 2 = -5 to 0 dbm 3 = -3 to +2 dbm 4 = 0 to +5 dbm temperature range and package blank = commercial temperature(0 to 70 o c), 10.4 mm, black case e = commercial temperature(0 to 70 o c), 9.8 mm, blue case rohs blank = rohs non-compliant product g5 = rohs 5/6-compliant product (lead exemption)
- 9 - ds-6144 rev 0.0 2010-06-03 p/n: c-1xx-1250(c)-tdf b(3)-ssc2(3/4)x(-g5) 1.25 gbps cwdm single mode transceiver warnings handling precautions: this device is susceptible to damage as a resu lt of electrostatic di scharge (esd). a static free environment is highly recommended. follow guide lines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerou s to human eyes. avoid eye exposure to direct or indirect radiation. legal notice important notice! all information contained in this document is subject to change without notice, at source photonics? sole and absolute discretion. source photonics warrants performance of its products to current specifications only in accordance with the company?s standard one-year warranty; however, specifications designated as ?preliminary? are given to describe components only, and source photoni cs expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warr anties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. please re fer to the company?s terms and conditions of sale for further warranty information. source photonics assumes no liability fo r applications assistance, customer pr oduct design, software performance, or infringement of patents, services, or intellectual proper ty described herein. no license, either express or implied, is granted under any patent right, copyright, or inte llectual property right, and source photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. source photonics customers using or selling products for use in such applications do so at t heir own risk and agree to fully defend and indemnify source photonics for any damages resulting from such use or sale. the information contained in this document is pr ovided on an ?as is? basis. customer agrees that source photonics is not liable fo r any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in th is document. customer must contact source photonics to obtain the latest version of this publication to verify, befo re placing any order, that the information contained herein is current. contact u.s.a. headquarters 20550 nordhoff street chatsworth, ca 91311 usa tel: +1-818-773-9044 fax: +1-818-773-0261 sales@sourcephotonics.com china building #2&5, west export processing zone no. 8 kexin road, hi-tech zone chengdu, 611731, china tel: +86-28-8795-8788 fax: +86-28-8795-8789 sales@sourcephotonics.com.cn ? taiwan 9f, no 81, shui lee rd. hsinchu, 300, taiwan r.o.c. tel: +886-3-5169222 fax: +886-3-5169213 sales@sourcephotonics.com.tw ? copyright source photonics, inc. 2007~2008 all rights reserved


▲Up To Search▲   

 
Price & Availability of C-129-1250C-TDFB-SSC3

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X