1 revision date: 2/3/2009 new product temperature compensated zener reference diode series 1n4565 thru 1n4584a, 1n4565a-1 thru 1n4584a-1 maximum ratings operating & storage temperature: -65c to +175c dc power dissipation: 500mw @ +50c power derating: 4 mw / c above +50c reverse leakage current l r = 2 a @ 25c & v r = 3 vdc features ? available in jan, jantx , jantxv and jans per mil-prf-19500/452 ? 6.4 volt nominal zener voltage + 5 % ? metallurgically bonded zener effective voltage maximum dynamic jedec test temperature temperature temperature zener type current coefficient stability range impeadance number ( 3 v zt maximum) (note 2) (note1) ma %/c mv c ohms 1n4565-1 0.5 0.01 48 0 to +75c 200 1n4565a-1 0.5 0.01 100 -55 to +100c 200 1n4566-1 0.5 0.005 24 0 to +75c 200 1n4566a-1 0.5 0.005 50 -55 to +100c 200 1n4567-1 0.5 0.002 10 0 to +75c 200 1n4567a-1 0.5 0.002 20 -55 to +100c 200 1n4568-1 0.5 0.001 5 0 to +75c 200 1n4568a-1 0.5 0.001 10 -55 to +100c 200 1n4569-1 0.5 0.0005 2.5 0 to +75c 200 1n4569a-1 0.5 0.0005 5 -55 to +100c 200 1n4570-1 1.0 0.01 48 0 to +75c 100 1N4570A -1 1.0 0.01 100 -55 to +100c 100 1n4571-1 1.0 0.005 24 0 to +75c 100 1n4571a-1 1.0 0.005 50 -55 to +100c 100 1n4572-1 1.0 0.002 10 0 to +75c 100 1n4572a-1 1.0 0.002 20 -55 to +100c 100 1n4573, -1 1.0 0.001 5 0 to +75c 100 1n4573a, -1 1.0 0.001 10 -55 to +100c 100 1n4574-1 1.0 0.0005 2.5 0 to +75c 100 1n4574a-1 1.0 0.0005 5 -55 to + 100c 100 1n4575-1 2.0 0.01 48 0 to +75c 50 1n4575a-1 2.0 0.01 100 -55 to +100c 50 1n4576-1 2.0 0.005 24 0 to +75c 50 1n4576a-1 2.0 0.005 50 -55 to +100c 50 1n4577-1 2.0 0.002 10 0 to +75c 50 1n4577a-1 2.0 0.002 20 -55 to +100c 50 1n4578-1 2.0 0.001 5 0 to + 75c 50 1n4578a-1 2.0 0.001 10 -55 to +100c 50 1n4579-1 2.0 0.0005 2.5 0 to +75c 50 1n4579a-1 2.0 0.0005 5 -55 to +100c 50 1n4580-1 4.0 0.01 48 0 to +75c 25 1n4580a-1 4.0 0.01 100 -55 to +100c 25 1n4581-1 4.0 0.005 24 0 to +75c 25 1n4581a-1 4.0 0.005 50 -55 to +100c 25 1n4582-1 4.0 0.002 10 0 to +75c 25 1n4582a-1 4.0 0.002 20 -55 to +100c 25 1n4583-1 4.0 0.001 5 0 to +75c 25 1n4583a-1 4.0 0.001 10 -55 to +100c 25 1n4584-1 4.0 0.0005 2.5 0 to +75c 25 1n4584a-1 4.0 0.0005 5 -55 to +100c 25 electrical specifications @ +25 oc (unless otherwise specified) note 1: the maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the specified mv at any discrete temperature between the established limits, per jedec standard no. 5. note 2: zener impedance is derived by superimposing on l zt a 60hz rms a.c. current equal to 10% of l zt.
tel: 603-641-semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics revision date: 2/3/2010 2 1n4565 thru 1n4584a, 1n4565a-1 thru 1n4584a-1 typical change of temperature coefficient with change in operating current +.0015 +.0010 +.0005 0 -.0005 -.0010 -.0015 +.0010 +.0005 0 -.0005 -.0010 -.0015 change in temperature coefficient ( %/c) zener impedance zzt (ohms) zener impedance zzt (ohms) zener impedance vs. operating current 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 operating current l zt (ma) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 operating current l zt (ma) .25 .5 1.0 1.5 2.0 operating current l zt (ma) .1 .2 .3 .4 .5 .6 .7 .8 .9 operating current l zt (ma) .25 .5 1.0 1.5 2.0 2.5 3.0 3.5 operating current i zt (ma) 1.0 2.0 3.0 4.0 5.0 6.0 operating current i zt (ma) 10000 5000 1000 500 100 50 10 10000 5000 1000 500 100 50 10 1n4565-1n4569 1n4565-1n4574 1n4570-1n4574 1n4575-1n4579 1n4580-1n4584 1n4575-1n4584 graphs
tel: 603-641-semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics revision date: 2/3/2010 3 1n4565 thru 1n4584a, 1n4565a-1 thru 1n4584a-1 leaded design data case: hermetically sealed, do C 35 lead material: copper clad steel lead finish: tin / lead polarity: cathode end is banded. mounting position: any 0.080 2.03 max dia polarity band (cathode) 0.018 / 0.022 0.457 / 0.559 dia 0.175 4.44 max 1.000 25.400 min all dimensions in inch mm 1.000 25.400 min outline drawing
our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. revision date: 2/3/2010 aeroflex / metelics, inc. 975 stewart drive, 54 grenier field road, sunnyvale, ca 94085 londonderry, nh 03053 tel: (408) 737-8181 tel: (603) 641-3800 fax: (408) 733-7645 fax: (603)-641-3500 sales: 888-641-semi (7364) h i- r el c omponents 9 hampshire street, lawrence, ma 01840 tel: (603) 641-3800 fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents aeroflex / metelics, inc. reserves the right to make changes to any products and services herein at any time without notice. consult aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by aeroflex; nor does the purchase, lease, or use of a product or service from aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of aeroflex or of third parties. copyright 2010 aeroflex / metelics. all rights reserved. www.aeroflex.com/metelics metelics-sales@aeroflex.com iso 9001: 2008 certified companies 1n4565 thru 1n4584a, 1n4565a-1 thru 1n4584a-1
|
