25 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable connectors fh19 & fh19s series features 1. low-profile 0.5mm pitch fpc, ffc connectors miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. * the design of this connector has been made thinner and smaller, with a height of 0.9mm and width of 3mm. [as of august 2002, this is the smallest connector of this type available on the market !] * pcb footprint: reduced approximately 48% (as compared with hirose electric's 0.5mm pitch fh12 series connectors) * connector weight: reduced approximately 78% (as compared with hirose electric's 0.5mm pitch fh12 series connectors) 2. conductive traces on the pcb can be designed to run under the connector all bottom surface of the connector is solid, without any exposure of the contact. 3. proven flip-lock actuator system assures easy and reliable operation rotating actuator permits easy insertion and reliable connection with the fpc & ffc. tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 4. accepts 0.2mm & 0.3mm thick fpc, ffc accepts 0.2mm & 0.3mm thick fpc, ffc, easy inserted in the connector. the connector will also terminate successfully with 0.2mm thick flat flexible cable (ffc). 5. designed for placement with automatic equipment packaged in embossed tape, on reel. one reel contains 5,000 pieces. applications notebook pc?, pda?, digital cameras and other compact devices requiring interconnections of the main circuit board with the lcd, plasma display (pdp), hdd or other devices. 0.9mm 3mm 17m m fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc fpc ? ffc enclosed construction 0.9mm height incorporates the flip-lock system (30pos. type) metal fittings (leadless type) absence of protrusions from the connector helps in design of miniaturized devices. metal fittings (leadless) enclosed construction (no exposed contacts.) fh19 series ? fpc, ffc thickness: 0.2 0.03mm actuator color: dark brown actuator color: black fh19s series ?fpc, ffc thickness: 0.3 0.03mm world's smallest & lightest world's smallest & lightest
26 fh19 s - 30s - 0.5 sh (48) 1 2 4 5 3 6 product specifications rating current rating 0.5 a dc voltage rating 50 v ac operating temperature range -55 ? to +80 ? (note 1) operating humidity range relative humidity 90% max. (no condensation) storage temperature range -10 ? to +50 ? (note 2) storage humidity range relative humidity 90% max. materials lcp color: beige insulator pps/lcp ul94v-0 contacts phosphor bronze gold or tin-lead plated (note 3) ------- metal fittings phosphor bronze pure tin reflow plated ------- part material finish remarks note 1: includes temperature rise caused by current flow. note 2: the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. note 3: when fpc is gold plated, the connector contacts should be also gold plated: select the (05) , (45) , (48) specification . item specification conditions 1. insulation resistance 500 m ohms min. 100 v dc 2. withstanding voltage no flashover or insulation breakdown 150 v ac/1 minute 3. contact resistance 100 m ohms max. 1 ma * including fpc/ffc conductor resistance 4. durability contact resistance: 100 m ohms max. 20 cycles (insertion/ withdrawal) no damage, cracks, or parts dislocation. no electrical discontinuity of 1 s or more. 5. vibration contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1 s. min. 6. shock contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. 7. humidity contact resistance: 100 m ohms max. (steady state) insulation resistance: 100 m ohms min. no damage, cracks, or parts dislocation. contact resistance: 100 m ohms max. 8. temperature cycle insulation resistance: 100 m ohms min. no damage, cracks, or parts dislocation. 9. resistance to no deformation of components affecting performance. reflow: at the recommended temperature profile soldering heat manual soldering: 350 ? 5 ? for 5 seconds 96 hours at temperature of 40 ? and humidity of 90 to 95% temperature: -40 ? / +15 ? to +35 ? / +85 ? / +15 ? to +35 ? time: 30 / 2 to 3 / 30 / 2 to 3(minutes) 5 cycles color: dark brown (fh19 series) color: black (fh19s series) acceleration of 981 m/s 2 , 6 ms duration, sine half- wave waveform, 3 cycles in each of the 3 axis. frequency: 10 to 55 hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions ordering information series name : fh19 blank : fpc,ffc thickness : 0.2mm s : fpc,ffc thickness : 0.3mm no. of contacts : 4 to 50 contact pitch : 0.5mm terminal type sh: smt horizontal mounting type material and plating specifications : 1 4 2 5 3 6 recommended fpc, ffc fh19 series fh19s series thickness: = 0.2 0.03mm gold or tin-lead plated (note 3) thickness: = 0.3 0.03mm gold or tin-lead plated (note 3) actuator material reel material pps paper (05) (51) (05) (51) (05) (51) pps plastic ------ ------ (45) (46) ------ ------ lcp plastic (48) (49) ------ ------ (48) (49) fh19 fh19s 4 to 10 pos. fh19s 11 to 50 pos. contact: gold plated contact: tin-lead plated contact: gold plated contact: tin-lead plated contact: gold plated contact: tin-lead plated
27 b connector operating instructions, precautions and recommendations operation precautions fpc conductor surface (bottom side) 1. fpc/ffc termination procedure. connector installed on the board. 1) lift up the actuator. use thumb or index finger. 2) rotate down the actuator until firmly closed. it is critical that the inserted fpc/ffc is not moved and remains fully inserted. should the fpc/ffc be moved, open the actuator and repeat the process, starting with step 1 above. 2) the connector will assure reliable performance when the actuator is open to 130 maximum (see fig.1) do not exceed this angle, as this may cause permanent damage to the connector. 2. fpc/ffc removal 1) lift up the actuator. 2) carefully remove the fpc/ffc. 3) assure that the fpc/ffc is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. 1) do not apply excessive force or use any type of tool to operate the actuator.
28 d (1) 2.5 (0.5) 0.5 b a (0.15) (0.15) 0.5 0 0.15max 1 2 1 2 1.3 2.15 (2.1) 0.15max 0 3 0.15 g g e number of contacts indicator (c: fpc insertion area dimension) polarizing mark indicator number of contacts 0.9 (including contact terminal leads) connector dimension [ fh19 series ] unit: mm note1: embossed tape reel packaging (5,000 pieces/reel) . order by number of reels. note2: select the (05) or (48) plating code for gold plating. part number fh19-4s-0.5sh ( 49 ) fh19-6s-0.5sh ( 49 ) fh19-7s-0.5sh ( 49 ) fh19-8s-0.5sh ( 51 ) fh19-9s-0.5sh ( 49 ) fh19-10s-0.5sh ( 49 ) fh19-12s-0.5sh ( 49 ) fh19-13s-0.5sh ( 49 ) fh19-15s-0.5sh ( 49 ) fh19-17s-0.5sh ( 51 ) fh19-20s-0.5sh ( 49 ) fh19-21s-0.5sh ( 51 ) fh19-24s-0.5sh ( 49 ) fh19-27s-0.5sh ( 49 ) fh19-30s-0.5sh ( 49 ) fh19-40s-0.5sh ( 49 ) fh19-50s-0.5sh ( 49 ) 586-1009-8-49 586-1013-5-49 586-1017-6-49 586-1012-2-51 586-1006-0-49 586-1016-3-49 586-1018-9-49 586-1001-6-49 586-1004-4-49 586-1007-2-51 586-1002-9-49 586-1015-0-51 586-1011-0-49 586-1000-3-49 586-1003-1-49 586-1008-5-49 586-1005-7-49 4 6 7 8 9 10 12 13 15 17 20 21 24 27 30 40 50 0 4.0 0 5.0 0 5.5 0 6.0 0 6.5 0 7.0 0 8.0 0 8.5 0 9.5 10.5 12.0 12.5 14.0 15.5 17.0 22.0 27.0 0 1.5 0 2.5 0 3.0 0 3.5 0 4.0 0 4.5 0 5.5 0 6.0 0 7.0 0 8.0 0 9.5 10.0 11.5 13.0 14.5 19.5 24.5 0 2.57 0 3.57 0 4.07 0 4.57 0 5.07 0 5.57 0 6.57 0 7.07 0 8.07 0 9.07 10.57 11.07 12.57 14.07 15.57 20.57 25.57 0 3.35 0 4.35 0 4.85 0 5.35 0 5.85 0 6.35 0 7.35 0 7.85 0 8.85 0 9.85 11.35 11.85 13.35 14.85 16.35 21.35 26.35 cl no. number of contacts a b c d notes the coplanarity of each terminal lead and metal fitting is within 0.1 the contact terminal lead position indicates the dimension from the e surface, the bottom surface of the insulator body. the connector is supplied in embossed tape packaging. for details see the packaging specifications. any discoloration of the plastic compound will not affect form, fit or function of the connector. 1 2 3 4
29 (0.03) e d (1) 2.5 (0.5) 0.5 b a (0.15) (0.15) 0.5 0 0.15max 1 2 (1.3) 2.15 (2.1) 0.15max 0 1 2 3 6 0.15 g g number of contacts (c: fpc insertion area dimension) number of contacts indicator. polarizing mark indicator 0.9 (including contact terminal leads) [ fh19s series ] notes the coplanarity of each terminal lead and metal fitting is within 0.1 the contact terminal lead position indicates the dimension from the e surface, the bottom surface of the insulator body. the connector is supplied in embossed tape packaging. for details see the packaging specifications. any discoloration of the plastic compound will not affect form, fit or function of the connector. note that preventive hole for sink mark could be added for improvement. the contacts are protruded approx. 0.03mm from the housing top surface. 1 2 6 3 4 5 unit: mm note1: embossed tape reel packaging (5,000 pieces/reel) . order by number of reels. note2: select the (05) or (45) or (48) plating code for gold plating. part number fh19s-4s-0.5sh(46) fh19s-5s-0.5sh (46) fh19s-6s-0.5sh (46) fh19s-9s-0.5sh (46) fh19s-10s-0.5sh (46) fh19s-12s-0.5sh (49) fh19s-13s-0.5sh (51) fh19s-14s-0.5sh (51) fh19s-16s-0.5sh (51) fh19s-17s-0.5sh (49) fh19s-18s-0.5sh (49) fh19s-20s-0.5sh (49) fh19s-21s-0.5sh (51) fh19s-22s-0.5sh (51) fh19s-24s-0.5sh (49) fh19s-26s-0.5sh (51) fh19s-27s-0.5sh (51) fh19s-28s-0.5sh (49) fh19s-30s-0.5sh (51) fh19s-32s-0.5sh (51) fh19s-40s-0.5sh (49) fh19s-45s-0.5sh (51) fh19s-50s-0.5sh (49) 586-1119-6-46 586-1115-5-46 586-1124-6-46 586-1120-5-46 586-1118-3-46 586-1105-1-49 586-1114-2-51 586-1113-0-51 586-1112-7-51 586-1100-8-49 586-1110-1-49 586-1101-0-49 586-1120-0-51 586-1108-0-51 586-1102-3-49 586-1104-9-51 586-1103-6-51 586-1125-9-49 586-1109-2-51 586-1121-8-51 586-1106-4-49 586-1111-4-51 586-1107-7-49 4 5 6 9 10 12 13 14 16 17 18 20 21 22 24 26 27 28 30 32 40 45 50 0 4.0 0 4.5 0 5.0 0 6.5 0 7.0 0 8.0 0 8.5 0 9.0 10.0 10.5 11.0 12.0 12.5 13.0 14.0 15.0 15.5 16.0 17.0 18.0 22.0 24.5 27.0 0 1.5 0 2.0 0 2.5 0 4.0 0 4.5 0 5.5 0 6.0 0 6.5 0 7.5 0 8.0 0 8.5 0 9.5 10.0 10.5 11.5 12.5 13.0 13.5 14.5 15.5 19.5 22.0 24.5 0 2.57 0 3.07 0 3.57 0 5.07 0 5.57 0 6.57 0 7.07 0 7.57 0 8.57 0 9.07 0 9.57 10.57 11.07 11.57 12.57 13.57 14.07 14.57 15.57 16.57 20.57 23.07 25.57 0 3.35 0 3.85 0 4.35 0 5.85 0 6.35 0 7.35 0 7.85 0 8.35 0 9.35 0 9.85 10.35 11.35 11.85 12.35 13.35 14.35 14.85 15.35 16.35 17.35 21.35 23.85 26.35 cl no. number of contacts a b c d
30 unit: mm 0 4 0 5 0 6 0 7 0 8 0 9 10 12 13 14 15 16 17 18 0 4.0 0 4.5 0 5.0 0 5.5 0 6.0 0 6.5 0 7.0 0 8.0 0 8.5 0 9.0 0 9.5 10.0 10.5 11.0 0 1.5 0 2.0 0 2.5 0 3.0 0 3.5 0 4.0 0 4.5 0 5.5 0 6.0 0 6.5 0 7.0 0 7.5 0 8.0 0 8.5 0 3.1 0 3.6 0 4.1 0 4.6 0 5.1 0 5.6 0 6.1 0 7.1 0 7.6 0 8.1 0 8.6 0 9.1 0 9.6 10.1 0 3.9 0 4.4 0 4.9 0 5.4 0 5.9 0 6.4 0 6.9 0 7.9 0 8.4 0 8.9 0 9.4 0 9.9 10.4 10.9 0 2.5 0 3.0 0 3.5 0 4.0 0 4.5 0 5.0 0 5.5 0 6.5 0 7.0 0 7.5 0 8.0 0 8.5 0 9.0 0 9.5 number of contacts a j b k l b 0.30.05 (land) 0.5 0.80.05 0.250.05 (metal mask) 0.1 h h number of contacts (0.15) (0.15) (0.15) (0.15) (3) (2.5) (a) j0.1 k0.1 0.80.05 3.30.05 (0.2) (0.05) ( x ) 0.20.03 3.5 min. (stiffener) 0.30.03 3.5 min. (stiffener) 2-r0.2 0.50.07 b0.03 0.50.03 l0.05 fh19 series fh19s series 0.350.03(fpc) 0.30.03(ffc) 2.50.3 (area with removed covering film layer) b recommended pcb land and metal mask dimensions [common to fh19 & fh19s series] b recommended fpc, ffc dimensions [ common to fh19 & fh19s series] recommended metal mask thickness: 0.10 mm. note1: polyamide and a thermally hardened adhesive is recommended as the materials for the stiffener. note2: y dimension should be 1.5mm min., and x dimension should be 1.5mm for improved flexibility of fpc. unit: mm 20 21 22 24 26 27 28 30 32 40 45 50 12.0 12.5 13.0 14.0 15.0 15.5 16.0 17.0 18.0 22.0 24.5 27.0 0 9.5 10.0 10.5 11.5 12.5 13.0 13.5 14.5 15.5 19.5 22.0 24.5 11.1 11.6 12.1 13.1 14.1 14.6 15.1 16.1 17.1 21.1 23.6 26.1 11.9 12.4 12.9 13.9 14.9 15.4 15.9 16.9 17.9 21.9 24.4 26.9 10.5 11.0 11.5 12.5 13.5 14.0 14.5 15.5 16.5 20.5 23.0 25.5 number of contacts a j b k l
31 m0.3 1.750.1 80.1 20.15 40.1 n0.1 ?1.5 + 0.1 0 (0.3) (1) (q) (1.7) (3.3) (4.3) unreeling direction flat surface for placement with automatic equipment (?80) (?380) (?13) (r) (2) end portion mounting portion lead portion (400 mm min.) embossed carrier tape blank portion blank portion top cover tape (10 pockets min.) (10 pockets min.) b packaging specifications [common to fh19 & fh19s series] reel dimensions note1: 5,000 pieces per reel. embossed tape 32 mm or wider will have perforated feed holes on two sides. note2: refer to page 26 ordering information for reel materials. embossed carrier tape dimensions unit: mm 0 4 0 5 0 6 0 7 0 8 0 9 10 12 13 14 15 16 17 18 16 16 16 16 16 16 16 16 16 16 16 24 24 24 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 11.5 11.5 11.5 0 4.3 0 4.8 0 5.3 0 5.8 0 6.3 0 6.8 0 7.3 0 8.3 0 8.8 0 9.3 0 9.8 10.3 10.8 11.3 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 24.5 24.5 24.5 number of contacts m q n r unit: mm 20 21 22 24 26 27 28 30 32 40 45 50 24 24 24 24 24 24 24 24 32 44 44 44 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 20.2 20.2 20.2 12.3 12.8 13.3 14.3 15.3 15.8 16.3 17.3 18.3 22.3 24.8 27.3 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 32.5 44.5 44.5 44.5 number of contacts m q n r
32 b recommended temperature profile [for fh19 & fh19s series] hrs test conditions solder method :reflow, ir/hot air (nihon den-netsu co., ltd.s part number: sensby nr- 2 ) environment :room air solder composition :paste, 63%sn/37%pb (senju metal industry, co., ltd.s part number: oz63-201c-50-9) test board : glass epoxy 45mm100mm1.6mm thick land dimensions :0.3mm0.8mm metal mask :0.25mm0.8mm0.1mm thick this temperature profile is based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations. start temperature(?) time (seconds) 60 25? (60 sec.) (20 sec. to 30 sec.) (30 sec.) 60 sec. to 90 sec. preheating soldering 0 50 100 150 150? 160? 240? 200? 5 sec. max. 200 250 120 using typical solder paste hrs test condition solder method :reflow, ir/hot air (nihon den-netsu co., ltd.s part number: sensby nr- 2 ) environment :room air solder composition :paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.s part number:m705-221cm5-42-10.5) test board : glass epoxy 45mm100mm1.6mm thick land dimensions : 0.3mm0.8mm metal mask :0.25mm0.8mm0.1mm in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult tour solder paste and equipment manufacturer for specific recommendations. max 250? start time (seconds) 60 25? (60 sec.) (60 sec.) 90 sec. to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 120 temperature(?) using lead-free solder paste
33 b fh19 & fh19s series fpc/ffc construction (recommended specifications) 1. using single-sided fpc 2. dual-sided fpc note 1: the 0.2mm thick ffc is the 0.3mm thick ffc with different stiffener. note 2: this specification is a recommendation for the fh19, fh19s series connectors using fpc/ffc 0.2/0.3 0.03mm thick. 3. using ffc (flexible flat cable) fpc : flexible printed circuit material name surface treatment copper foil base adhesive base film reinforcement material adhesive stiffener material thickness ( m) fh19 fh19s tin-lead plating cu 1oz polyamide 1 mil thick heat-hardened adhesive polyamide 3 mil thick total covering film layer. cover adhesive polyamide 1 mil thick 5 35 25 25 30 75 195 5 35 25 25 30 175 295 25 25 25 25 fpc : flexible printed circuit covering layer film cover adhesive surface treatment through-hole copper copper foil base adhesive base film base adhesive copper foil cover adhesive covering layer film reinforcement material adhesive stiffener cu 1 / 2oz polyamide 1 mil thick heat-hardened adhesive polyamide 1 mil thick total 18 25 25 25 25 199 18 25 25 50 100 299 polyamide 1 mil thick tin-lead plating cu cu 1 / 2oz polyamide 1 mil thick 25 25 5 15 18 18 25 18 25 25 5 15 18 18 25 18 material name material thickness ( m) fh19 fh19s ffc : flexible flat cable tin plated, soft copper film adhesive polyester adhesive stiffener polyester film adhesive * practical tolerance of thickness dimension is 20m (i.e., 187 to 227m). polyester polyester polyester total polyester thermoplastic type 12 30 35 30 12 30 100 207 12 30 35 30 12 30 188 295 material name material thickness ( m) fh19 fh19s
|
