83 - (40) 01 22 at 3 4 2 1 3db e 3.6 1.4max (0.65) (0.2) (0.2) 1.20.81.2 4 (1.2) 1.6 (1.2) soldering areas features 1. small size and lightweight 4mm x 3.6 mm x 1.4 mm max height and weighting only 0.1g. 2. wide range of variations for each type of attenuator attenuation levels available in 1 db steps from 0 to 10 db, and 20 db for a total of 12 types of variations. 3. automatic placement supplied in embossed packaging to allow placement with automatic equipment. individual piece packaging is also available. product specifications ratings frequency range characteristic impedance maximum input power dc to 2.5ghz (note) 50? 1w operating temperature operating humidity -10? to +65? 95% max. item 1.vibration 2.shock 3. temperature cycle characteristic requirement conditions no electrical discontinuity of 1s or more. no damage, cracks, or parts dislocation. frequency of 10 to 2000 hz, overall amplitude of 1.5mm, acceleration of 98m/s 2 , 2 hours in each of the 3 directions. acceleration of 490m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis. temperature : -55? / +15? to +35? / +85? / +15? to +35? time : 30 / 2 to 3 / 30 / 2 to 3 (minutes) 5 cycles note: dc to 600mhz for at-2220. component attenuation element material finish metal film tin-lead plated the test method conforms to mil-std-202. materials ax:fixed attenuator series name :2200 series attenuation 00-(0) : 0 db (through) 01 : 1db 06 : 6db (40): rohs compliant 1 2 3 4 ordering information dimensions at-2203 shown smt stripline mounting fixed attenuators at-2200 series the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
at-2200 series smt stripline mounting fixed attenuators 84 at-2203(40) at-2210(40) specifications typical data part number attenuation (db) dc~ 1,000mhz 1,000~ 2,000mhz 2,000~ 2,500mhz dc~2,500mhz v.s.w.r (max) characteristic impedance (?) power (w) mounting surface temperature (? max.) at time of maximum input power weight (g) at-2200-(0)(40) at-2201(40) at-2202(40) at-2203(40) at-2204(40) at-2205(40) at-2206(40) at-2207(40) at-2208(40) at-2209(40) at-2210(40) at-2220(40) 0 +0.3 0 1 0.3 2 0.3 3 0.3 4 0.3 5 0.3 6 0.3 7 0.3 8 0.3 9 0.3 10 0.3 0 +0.5 0 1 0.5 2 0.5 3 0.5 4 0.5 5 0.5 6 0.5 7 0.5 8 0.5 9 0.5 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 50 50 50 50 50 50 50 50 50 50 50 50 1 1 1 1 1 1 1 1 1 1 1 1 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 10 0.5 20 1.5(dc to 600mhz) 1.2( dc to 600mhz) 10 0.7 1.2 1.2 1.2 1.25 1.25 1.25 note: when ordering packaged on tape and reel, add (06) after the end of the part number. one reel = 1,000 pieces 1.75 2.00 2.25 3.00 3.25 3.50 3.75 4.00 4.25 0.0 0.5 1.0 1.5 2.0 2.5 3.0 2.50 2.75 0.0 0.5 1.0 1.5 2.0 2.5 3.0 1.50 1.45 1.40 1.25 1.20 1.15 1.10 1.05 1.00 1.35 1.30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 1.50 1.45 1.40 1.25 1.20 1.15 1.10 1.05 1.00 1.35 1.30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 8.75 9.00 9.25 10.00 10.25 10.50 10.75 11.00 11.25 9.50 9.75 attenuation attenuation frequency(ghz) vswr vswr frequency(ghz) frequency(ghz) frequency(ghz) (db) (db) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
85 at-2200 seriessmt stripline mounting fixed attenuators 250 ? 30 sec. max. 9030 sec. time(s) 230 180 50 150 0 200 100 10 sec. max. b recommended solder temperature profile brecommended mounting example the attenuators can be placed using reflow or manual soldering manual soldering tip temperature: 350? max. for 3 sec. max. note 1: do not touch the ceramic portion with the soldering iron tip. note: this attenuator is intended for a one-time use. do not re-solder or re-use. reflow soldering (temperature profile recommendations) mounting and soldering recommendations at-2200(40) grounding pattern ceramic portion the dotted line portion indicates the position of the pattern. 50?line board the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
|
