low profile connectors with high withstanding voltage, designed for connecting liquid crystal display back light lamps to their starters. hjst 2 1 3 hjst ?low profile ?smt configuration ?applicable to special wires ?headers with locating bosses ?housing lock also serves as polarizing device specifications ?current rating: 1.0a ac, dc (awg #22) ?voltage rating: 600v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/10m ? max. after environmental testing/20m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 1,800v ac/minute ?applicable wire: awg #28 to #22 * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 bh connector 4.0/8.0/12.0mm pitch/disconnectable crimp style connectors emboss tape n j o ? n j o ? ? ? ? n j o n j o ? ? ? ? ? ? note: 1. tolerances are for pattern non-cumulative: 0.05mm for all centers. tolerance for hole size is 0.1. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as guideline. contact jst for details. (3 circuits 4.0mm pitch) (2 circuits 8.0mm pitch) (2 circuits 12.0mm pitch) (3 circuits 4.0mm pitch plugged up) ? ? n j o n j o ? ? ? ? n j o ? ? ? ? n j o n j o n j o ? ? ? ? ? ? (4 circuits 4.0mm pitch) ? n j o ? ? ? ? ? n j o (4 circuits 4.0mm pitch with post removed) ? n j o ? ? ? ? ? n j o n j o n j o ? ? ? ? ? ? ? y ? ? ? ? ? y y through-hole type smt type n j o ? n j o ? ? ? ? (2 circuits 4.0mm pitch) (2 circuits 8.0mm pitch with bosses) (2 circuits 8.0mm pitch plugged up) pc board layout (viewed from component side) 1
bh connector contact material and finish applicable wire mm 2 awg # phosphor bronze, tin-plated (reflow treatment) sbh-001t-p0.5 ? ? model no. insulation o.d. (mm) q'ty / reel ?
rohs compliance note: wire conductors should be tin-plated annealed copper strands. through-hole type shrouded header rohs compliance this product displays (lf)(sn) on a label. note: the applicable housing is "bhr-02(8.0)vs-1n" only. circuits model no. material and finish s02(8.0)b-bhs pitch (mm) post: copper alloy, copper-undercoated, tin-plated (reflow treatment) wafer: pa, ul94v-0, natural (ivory) q'ty / tray
housing material pa 66, ul94v-0, natural (white) circuits model no. dimensions (mm) y y note1) y y y note2) y y y bhr-02vs-1 bhr-03vs-1 bhr-02(8.0)vs-1n bhr-04vs-1 bhr-03vs-1 bhr-03(4-3)vs-1n bhr-04vs-1 bhr-05vs-1 pitch (mm) ab q'ty / bag
rohs compliance note: 1. bhr-02(8.0)vs-1n: 2 circuits 8.0mm pitch plugged up. 2. bhr-03(4-3)vs-1n: 4 circuits 4.0mm pitch header with circuit no.3 plugged up. ) + 4 5 ) + 4 5 # " 5 circuits " 1 - 4 $ 4 # ) . contact crimping applicator machine crimp applicator dies crimp applicator with dies sbh-001t-p0.5 " 1 , / . , 4 - * . , 4 4 $ . , 4 # ) . 4 $ 4 # ) . " 1 - . , 4 # ) . note: *strip-crimp applicator 2 to 4 circuits 2
bh connector smt type shrouded header (2 circuits 4.0mm pitch) (3 circuits 4.0mm pitch) (2 circuits 12.0mm pitch) (4 circuits 4.0mm pitch) / p (4 circuits 4.0mm pitch with post removed) note 5) / p (3 circuits 4.0mm pitch plugged up) note 3) (2 circuits 8.0mm pitch) (2 circuits 8.0mm pitch with ribs against prying) note 4) circuits model no. material and finish note1) note2) note4) note3) note5) sm02(4.0)b-bhs-1-tb sm02(8.0)b-bhs-1-tb sm02(8.0)b-bhs-tb sm02(8.0)b-bhs-1n-tb sm02(8.0)b-bhs-1r-tb sm02(12)b-bhs-1-tb sm03(4.0)b-bhs-1-tb sm03(7-d1)b-bhs-1n-tb sm04(4.0)b-bhs-1-tb sm04(9-e2)b-bhs-1-tb pitch(mm) post: copper alloy, copper-undercoated, tin-plated (reflow treatment) wafer: pa, ul94v-0, natural (ivory) solder tab: brass, copper-undercoated, tin-plated (reflow treatment) q'ty / reel
rohs compliance this product displays (lf)(sn) on a label. note: 1. header with bosses. contact jst for other circuits headers with bosses. 2. 2 circuits 8.0mm pitch plugged up. 3. 4 circuits 4.0mm pitch header with circuit no.3 plugged up. 4. header with ribs against prying. contact jst for other circuits headers with ribs against prying. 5. 5 circuits 4.0mm pitch header with circuit no.3 post removed. 6. the products listed above are supplied on embossed tape. 7. products with bosses supplied in loose piece are also available. contact jst for details. (2 circuits 8.0mm pitch with bosses) note 1) (2 circuits 8.0mm pitch plugged up) note 2) 3
|