do not scale from this print lsh-xxx-01-x-d-a-xx no of positions row specification lead style -01: surface mount (use c-135-01-x) plating specification -g: gold (use c-135-01-g) -h: heavy gold (use c-135-01-h) options -tr: tape and reel -k: polyamide film pad (use k-850-650, see fig. 2) -d: double (use lsh-xxx-01-d-a) -010, -020, -030, -040, -050, (per row) -a: alignment pin .070 ref 1.78 .035 ref 0.89 .01969 .0015 0.5001 0.038 "a" "a" lsh-xxx-01-d-a .256 6.50 ref .135 3.43 ref ((no of pos + 2) x .01969[.500]) +.120[3.05] ref .006 ref 0.15 ((no of pos+2)x.01969[.500])+.160[4.06] ref .029 0.74 ref .048 ref 1.22 .196 4.98 ref ((no of pos+1)x.01969[.500]) (((no of pos/2) - 1) x .01969 ref .090 ref 2.29 c2 01 02 .043 ref 1.08 ((no of pos + 2) x .01969[.5000]) + .075[1.91] ref .030 ref 0.76 .020 .003 0.50 0.08 (measured at tips) c l .265 .008 6.73 0.20 (see note 6) .075 .003 1.91 0.08 .110 ref 2.79 .005 ref 0.13 .149 .003 3.78 0.08 .038 0.95 ref .033 0.83 ref 'a' section "a"-"a" scale 10 : 1 c1 c-135-xx-x c3 c4 see note 5 .0040[.102] shear to .004[.10] max burr detail 'a' scale 20 : 1 c fig. 1 shown: lsh-020-01-x-d-a m sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .5mm double row socket assembly by: lsh-xxx-01-x-d-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing eric m 7/1/99 2 1 sheet scale: 3.5:1 insulator: lcp, color: black contact: becu f:\dwg\misc\mktg\lsh-xxx-01-x-d-a-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .001[.03] max. 3. minimum pushout force: 5 oz. 4. all part variations to be packaged in a pt-1-24-01-97 tube with two tp-12 plugs per tube except -k option which will use pt-1-24-02-23 and tp-12 . 5. cut in this area must be below surface mount leads. 6. max variation between adjacent contacts to be .005[.13] max. 7. samtec recommends right-side-up, single pass, 63/37 tin lead reflow soldering. 8. this part is not compatible with lead free reflow soldering. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision m
tube: pt-1-24-01-97 plug: tp-12 (parts to have positions #1 loaded in same direction as arrow on tube) (see note 4) "r" ref .295 7.50 "s" .020 0.50 note: "r" = ((no of positions + 2) x .01969[.5000]) + .160[4.06] "s" = (("r" - .295[7.50]) / 2) .020[.51] fig. 2 -k: polyamide film pad [use k-850-650] .630 16.00 user direction of reeling pocket not detailed -tr: tape & reel view packaging pin #1 -k option packaging view tube: pt-1-24-02-23 plug: tp-12 sheet of .5mm double row socket assembly by: lsh-xxx-01-x-d-a-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing eric m 7/1/99 2 2 sheet scale: 3.5:1 revision m f:\dwg\misc\mktg\lsh-xxx-01-x-d-a-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|