lvds/ 2.5v/ 7.0 5.0mm saw clock oscillators surface mount type KC7050Y-L2 series features ? low voltage 2.5v ? excellent jitter performance ? lvds output ? operation at fundamental high frequency ? 50 10 - 6 available table 1 freq. tol. operating temperature range ( c) note code 10 - 6 1 100 0 to + 70 standard specifications 0 50 with only certain frequencies a 100 - 5 to + 85 how to order kc7050y 312.500 l 2 1 e 00 type (7.0 5.0mm smd) output frequency output type (lvds) supply voltage (2.5v) frequency tolerance (see table 1) symmetry/ inh function (45/ 55%, stand-by) customer special model suffix (std specification is 00) packaging (tape & reel 1000 pcs./ reel) specifications item symbol conditions min. max. units output frequency range note1 fo 75 700 mhz frequency tolerance note2 f _tol initial tolerance, operating temperature range, rated power supply voltage change, aging (1 year @25 c), shock and vibration op. temp.: 0 to + 70 c - 50 + 50 10 - 6 op. temp.: 0 to + 70 c - 100 + 100 op. temp.: - 5 to + 85 c - 100 + 100 storage temperature range t _stg - 55 + 125 c operating temperature range t _use standard specifications 0 + 70 c max. supply voltage - 0.3 + 5 v supply voltage v cc 2.5v + 2.38 + 2.63 v current consumption (standard loaded) i cc 70 ma symmetry sym 100ohm @crossing point 45 55 % rise/ fall time (20% to 80% output level standard loaded) tr/ tf 100ohm 400 ps low level output voltage note3 v ol typ. 1.1v 0.9 v high level output voltage note3 v oh typ. 1.43v 1.6 v diffrentical output voltage note3 v od typ. 330mv 247 454 mv diffrentical output voltage error note3 dv od dv od = | v od1 - v od2 | 50 mv offset voltage v os typ. 1.25v 1.125 1.375 v offset voltage error dv os dv os = | v os1 - v os2 | 50 mv output load rl lvds output 100 ohm input voltage range v in 0 v cc v low level input voltage v il 30% v cc v high level input voltage v ih 70% v cc v disable time t _dis 200 ns enable time t _ena 10 ms start-up time t _str @minimum operating voltage to be 0 sec. 10 ms deterministic jitter (dj) dj measured with wavecrest dts-2079 visi 6.3.1 0.2 typ. ps 1 sigma jitter j sigma 2 typ. ps peak to peak jitter j pk-pk 20 typ. ps note : all electrical characteristics are defined at the maximum load and operating temperature range. note1: please contact us for inquiry about operating temperature range, available frequencies and other conditions. note2: aging (10 years @25 c) specification is available. note3: dc characteristic recommended land pattern (unit: mm) note: a capacitor of value 0.01 f and 10f between v cc and gnd is recommended. 1.5 3.9 1.6 2.54 2.54 rohs compliant pad connections #1 inh #2 nc #3 case gnd #4 output #5 complementary output #6 v cc inh function pad1 pad4/ pad5 (output) open active "h" level active "l" level high z (no-oscillation) plating: ni +au tolerance: 0.2 2.54 1.1 7.0 5.0 1.1 2.8 1.4 2.54 #3 #1 #6 #4 #2 #5 dimensions (unit: mm)
|