general purpose relays industrial relays kuip/kugp series panel plug-in relay 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 potter & brumfeld coil versions, dc coil coil rated operate coil rated coil code voltage voltage resistance power vdc vdc ?10% w kuip 5 5 3.75 21 1.2 6 6 4.5 32.1 1.125 12 12 9.0 120 1.2 24 24 18.0 472 1.25 48 48 36.0 1800 1.3 110 110 82.5 10000 1.25 kugp 5 5 3.75 14 1.8 6 6 4.5 20 1.8 12 12 9.0 80 1.8 24 24 18.0 320 1.8 48 48 36.0 1250 1.85 110 110 82.5 6720 1.8 all fgures are given for coil without preenergization, at ambient temperature +23c. coil versions, ac coil coil rated operate coil rated coil code voltage voltage resistance power vac vac ?15% va kuip 1 and 2 pole 6 6 5.1 6 2.0 12 12 10.2 24 2.0 24 24 20.4 85 2.0 120 120 102.0 2250 2.1 240 240 204.0 9110 2.1 kuip 3 pole, kugp 6 6 5.1 4.2 2.8 12 12 10.2 18 2.8 24 24 20.4 72 2.8 120 120 102.0 1700 2.9 240 240 204.0 7200 2.9 all fgures are given for coil without preenergization, at ambient temperature +23c. insulation data kuip kugp initial dielectric strength between open contacts 1200v rms 3500v rms between contact and coil 2200v rms 3750v rms between adjacent contacts 2200v rms 3750v rms initial insulation resistance between insulated elements 100m?, 500vdc n 10 amp rated relays n 2 form a (no) and 1-3 form c (co) contact arrangement n kuip 8mm coil-to-contact spacing and kugp 3mm contact gap n various mounting and socket styles typical applications voltage control units approvals ul e22575; csa lr15734 technical data of approved types on request contact data contact arrangement kugp: 2 form a (no); 3 form a (no) kuip: 1 form c (co), 2 form a (no), 2 form c (co), 3 form c (co) rated voltage 240vac rated current 10a contact material ag agcdo min recommended contact load 100ma, 12vdc 300ma, 12vdc frequency of operation 360 ops./hour 360 ops./hour operate/releases time max. 20/15ms bounce time max. 20ms contact ratings type load cycles ul 508 ag 5a, 240vac 5a, 28vdc 1/6hp, 120vac 2.5a, 120vac, tungsten 1/3hp, 240vac 0.5a, 120vdc 5fla, 15lra, 250vac agcdo 10a, 240vac 10a, 32vdc 5fla, 15lra, 250vac 1/3hp, 120vac 5a, 120vac, tungsten 1/2hp, 250vac 0.5a, 125vdc 10fla, 40lra, 125vac 3a, 600vac 1/2hp, 480vac 1/2hp, 600vac 1hp, 480vac, 3 phase mechanical endurance 10x10 6 ops. coil data coil voltage range 6 to 110vdc 6 to 240vac coil insulation system according ul class b
general purpose relays industrial relays kuip/kugp series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 potter & brumfeld accessories for details see datasheet sockets and accessories, kup relays product code description 27e893 din socket (use 20c318 clip) 27e121 track mount socket (use 20c314 clips) 27e043 chassis mount/solder eyelet socket (use 20c254 clip) 27e046 chassis mount/pcb socket (use 20c254 clip) 27e067 chassis mount/quick connect socket (use 20c254 clip) 27e396 snap-in/quick connect socket (use 20c254 clip) other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.te.com/customersupport/rohssupportcenter ambient temperature dc coil kuip: -45oc to 95oc kugp: -45oc to 75oc (1 & 2 pole) ac coil kuip: -45oc to 70oc kugp: -45oc to 70oc (1 & 2 pole) category of environmental protection iec 61810 rti - dust protected terminal type quick connects (qc) .187 pcb-tht terminal retention, push force 25 lbs for 3s weight 85g packaging/unit tray/25 pcs., box/150pcs. dimensions plain case bracket mount case x x x x 1. 906 max. (48.41) 1. 531 max. (38.89) 1 2 3 4 5 6 7 8 9 a b 1. 406 max. (35. 71) 1 2 3 4 5 6 7 8 9 a b 1. 51 8 max. (38.56) 1 .373 .0 10 (34.87 .25) 1. 71 3 .0 03 (43.51 .08) 1 .989 .0 03 (50.52) .1 78 typ . (4.52) 2.248 max. (57 .1 0) .078 ty p . (1 .98) 1 .906 max. (48.41) .75 (1 9. 1) 2.90 max. (73.7) .078 r. typ . (1 .98) x 1 .531 max. (38.89) .31 2 typ . (7 .92) .375 (9.53) .437 (1 1. 10 ) x 2.500 (63.50) x .625 typ . (1 5.88) .06 (1 .52) 1.406 max. (35.71) .07 (1 .8) x is for terminal dimensions. see teminal drawings. top fange case pcb layout bottom view on solder pins 3 form c shown omit unncessary holes for other contact forms .626 (1 5.90) .328 (8.33) .437 (1 1. 10 ) .875 (22.23) .07 6 dia. typ . (1 .93) .206 (5.23)
general purpose relays industrial relays kuip/kugp series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 3 potter & brumfeld terminal assignment 1 form c 2 form c 3 form c 2 form a (delete 1 & 3) 3 form a (delete 1, 2 & 3) product code structure typical product code kuip -5 a 5 5 -120 type kuip enclosed relay with 8mm contact to coil spacing kugp enclosed relay with 3mm open contact spacing and 8mm contact to coil spacing (form a only) contact arrangement and rating 5 1 form c (1 co) 1) 7 2 form a (2 no) 11 2 form c (2 co) 1) 12 3 form a (3 no) 14 3 form c (3 co) 1) 1) not available on kugp type coil input a ac, 50/60hz d dc mounting and options 1 socket mount (plain) case 5 bracket mount case t top fange case terminal and contact material 3 1.19mm (.047in) pcb, ag 5 4.75mm (.187in) quick connect/solder; agcdo 7 1.19mm (.047in) pcb, agcdo coil voltage coil code: please refer to coil versions table product code arrangement material coil terminals mounting part number kugp-7d55-24 2 form a, 2 no agcdo 24 vdc 4.75mm (.187in) qc bracket mount case 2-1393114-4 kuip-5a55-120 1 form c; 1 co 120 vac 2-1393115-0 kuip-11d55-12 2 form c; 2 co 12 vdc 1-1393115-0 kuip-11d55-24 24 vdc 1-1393115-1 kuip-14a15-120 3 form c; 3 co 120 vac socket mount, plain case 1-1393115-4 kuip-14d15-12 12 vdc 1-1393115-6 kuip-14d15-24 24 vdc 1-1393115-7 terminal dimensions 4.75mm (.187) quick connect 1.19mm (.047) printed circuit .1 56 (3.96) .032 (.81) thickness .093 (2.36) header .237 (6.02) .268 ref . (6.81) .047 (1 .1 9) .1 80 (4.57) .1 56 (3.96) .125 (3.18) .078 (1.98) .187.002 (4.75.05) .250 (6.35) 281 ref. (7.14) thickness .020 (.51) header a b 7 4 1 9 6 3 a b 7 4 1 9 6 3 8 5 2 a b 8 5 2
|
