mixers - sgl-bal - smt 9 9 - 260 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607 general description features functional diagram the hmc411ms8g & hmc411MS8GE are passive single balanced mixers that operates between 10 ghz and 15 ghz. the hmc411ms8g(e) operate with lo drive levels between +9 dbm and +15 dbm, and provide 9 db conversion loss across the entire speci- fi ed frequency band. these mixers require no external components or bias. conversion loss: 9 db lo/rf isolation: 27 db lo/if isolation: 30 db input ip3: +16 dbm no external components msop8g smt package electrical specifi cations, t a = +25 c typical applications the hmc411ms8g / hmc411MS8GE is ideal for: ? long haul radio platforms ? microwave radio ? vsat parameter if = 1.45 ghz lo = +13 dbm units min. typ. max. frequency range, rf & lo 10.0 - 15.0 ghz frequency range, if dc - 3 ghz conversion loss 912db noise figure (ssb) 912db lo to rf isolation 20 27 db lo to if isolation 20 30 db rf to if isolation 8 15 - 20 db ip3 (input) 11 16 d b m 1 db compression (input) 5 9 dbm * unless otherwise noted, all measurements performed as downconverter, if= 1.45 ghz.
mixers - sgl-bal - smt 9 9 - 261 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com conversion gain vs. temperature @ lo = +13 dbm isolation @ lo = +13 dbm if bandwidth @ lo = +13 dbm return loss @ lo = +13 dbm conversion gain vs. lo drive upconverter performance conversion gain @ lo = +13 dbm hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607 -20 -15 -10 -5 0 9 10111213141516 +25 c -40 c +85 c conversion gain (db) frequency (ghz) -20 -15 -10 -5 0 9 10111213141516 conversion gain (db) frequency (ghz) -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 if conversion gain if return loss response (db) frequency (ghz) -20 -15 -10 -5 0 9 10111213141516 rf lo return loss (db) frequency (ghz) -20 -15 -10 -5 0 9 10111213141516 lo = +7 dbm lo = +9 dbm lo = +11 dbm lo = +13 dbm lo = +15 dbm conversion gain (db) frequency (ghz) -50 -40 -30 -20 -10 0 9 10111213141516 rf/if lo/rf lo/if isolation (db) frequency (ghz)
mixers - sgl-bal - smt 9 9 - 262 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input ip3 vs. lo drive* input p1db vs. temperature @ lo = +13 dbm input ip3 vs. temperature @ lo = +13 dbm* harmonics of lo * two-tone input power = 0 dbm each tone, 1 mhz spacing. input ip2 vs. lo drive * mxn spurious @ if port nlo mrf01234 0xx0 5 37n/a 170494254 24766445657 3 >95 >95 >95 58 77 4 n/a >95 >95 >95 >95 rf = 14.45 ghz @ -10 dbm lo = 13 ghz @ +13 dbm all values in dbc relative to the if power level. measured as downconverter. nlo spur @ rf port lo freq. (ghz) 1 2 3 4 925184653 10.5 25 20 52 66 12 27 24 47 63 13.5 27 33 61 n/a 15 27 47 67 n/a 16.5 24 52 63 n/a lo = +13 dbm all values in dbc below input lo level @ rf port. hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607 -20 -15 -10 -5 0 9 10111213141516 +25 c -40 c +85 c conversion gain (db) frequency (ghz) 20 25 30 35 40 45 10 11 12 13 14 15 lo = +11 dbm lo = +13 dbm lo = +15 dbm ip2 (dbm) frequency (ghz) 5 10 15 20 25 10 11 12 13 14 15 +25 c -40 c +85 c ip3 (dbm) frequency (ghz) 5 10 15 20 25 10 11 12 13 14 15 lo = +11 dbm lo = +13 dbm lo = +15 dbm ip3 (dbm) frequency (ghz)
mixers - sgl-bal - smt 9 9 - 263 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing absolute maximum ratings rf / if input +15 dbm lo drive +27 dbm if dc current 2 ma storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a electrostatic sensitive device observe handling precautions notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads and ground paddle must be soldered to pcb rf ground. part number package body material lead finish msl rating package marking [3] hmc411ms8g low stress injection molded plastic sn/pb solder msl1 [1] h411 xxxx hmc411MS8GE rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h411 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607
mixers - sgl-bal - smt 9 9 - 264 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin number funciton description interface schematic 1, 8 gnd pins and exposed ground slug must connect to rf ground. 2lo this pin is ac coupled and matched to 50 ohms. 3, 4, 6 n/c not connected 5if this pin is dc coupled. for applications not requiring operation to dc, this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary if frequency range. for operation to dc, this pin must not source/sink more than 2 ma of current or die non-function and possible die failure will result. 7rf this pin is ac coupled and matched to 50 ohms. pin descriptions hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607
mixers - sgl-bal - smt 9 9 - 265 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. item description j1 - j2 pcb mount sma rf connector, sri j3 pcb mount sma connector, johnson u1 hmc411ms8g / hmc411MS8GE pcb [2] 101650 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 list of materials for evaluation pcb 103350 [1] hmc411ms8g / 411MS8GE gaas mmic single-balanced mixer, 10 - 15 ghz v02.0607
|
