W1X vishay draloric www.vishay.com document number 22201 42 revision 14-may-03 for technical questions, contact slcap@vishay .com ceramic disc capacitors class x1, 275v ac design: disc capacitors with epoxy coating rated voltage u r : (x1): 275v ac , 50hz (iec 60384-14.2) dielectric strength between leads: component test: 4000v ac , 50hz, 2s as repeated test admissible only once with 3600v ac , 50hz, 2s random sampling test (destructive test): 3500v ac , 50hz, 60s dielectric strength of body insulation: 2000v ac , 50hz, 60s (destructive test) dissipation factor tan : 25 ?10 -3 insulation resistance ris: 6 ?10 9 ? category temperature range ? ? ? ? ? a : (- 40 to + 125) c climatic category acc. to en60068-1: 40/125/21 coating: epoxy dipped, insulating, flame retarding acc. to ul 94v-0 taping and special lead configurations: on request marking: 0.6 0.05 f 1 30 -3 d max. 3 max. v 0.5 s max. ?dimensions in mm W1X 10n m x1 - 275v~ iec 384-14/2 all approved marks are also shown on the label. 0.1 1 10 100 f [mhz] z [ ? ] 10 1 10 0 10 -1 10 -2 impedance (z) as a function of frequency (f) at t a = 20 c (average). measurement with lead length 6mm. 15nf 22nf 10nf 6.8nf 4.7nf f 1
W1X vishay draloric document number 22201 www.vishay.com revision 14-may-03 43 for technical questions, contact slcap@vishay .com ceramic suppresion capacitors, class x1, 275v ac capacitance d x s max. f 1* d 0.05* v 0.5* ordering ceramic pf (mm) (mm) (mm) (mm) code dielectric 4700 pf 11.0 x 3.0 1.4 W1X472 cv k 6800 pf 11.0 x 3.0 W1X682 cv k 0.010 f 15.0 x 3.0 7.5 0.6 W1X103 cv k k 10000 0.015 f 17.0 x 3.0 1.6 W1X153 cv k 0.022 f 20.0 x 3.0 W1X223 cv k *standard lead configuration, other lead spacing and diameter available on request capacitance tolerances: 20%, (+ 50 - 20%) ordering code : 7th digit: capacitance tolerance: 20% = m + 50- 20% = s 10th/11th/12th digit: lead configuration (see general information) ordering information: W1X series 223 cap. value m tolerance cv rated voltage cf0 lead configuration k internal code approvals iec 60384-14 2 nd edition (1993) table ii & a 1 (1995-06) (x1) cb-test certificate fi 362 a 2 (275v ac ) en 132400 (1994) these approvals together with the cb-test certificate substitutes the national approval of the nations (x1) cb-test certificate de 1-7467 (275v ac ) given in the table below this approval mark together with the cb-certificate replace all national approval marks of the following countries (they have already signed the cb-agreement): austria belgium denmark finland sweden france germany ireland italy switzerland netherlands israel portugal spain great britain japan norway china poland czech. republic singapore rep. of korea hungary iceland slovenia
|