15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 01/17/12 all specifications subject to change without notice. unless otherwise specified all tolerances are: 0.25 in mm mechanical with integrated magnetics stacked 2 x 2 rj45 connector ARB537-014501I 10/100/1000 base-t ethernet application meets ieee 802.3 & ansi x 3.263 standards impedance: 100ohms transmit open circuit inductance always eu rohs/elv compliant, wave solder capable to 265c rj45 jack cavity conforms to fcc rules and regulations part 68, sub part f operating temperature: -40oc to +85oc electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.1v turns ratio chip: cable (3%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.5-100mhz 0.5-40mhz 40.1-100mhz ARB537-014501I 350 1ct:1ct 1.1 18 12-20*log(f/80) electrical speci?cations @ 25c part number emi fingers led (l/r) cross talk (db min) cmrr (db min) 0.5-100mhz hi-pot (vdc) 0.5-40mhz 40.1-100mhz ARB537-014501I yes g-y/g-y 35 33-20*log(f/50) 30 1500
15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 01/17/12 unless otherwise specified all tolerances are: 0.05 in mm pcb layout schematics ARB537-014501I ARB537-014501I with integrated magnetics stacked 2 x 2 rj45 connector materials ARB537-014501I housing: pbt, flammability rating 94v-o. shell: c2680 brass, 0.2mm thick, 50u?min nickel plating. mod jack contacts: phosphor bronze, 50u" gold plated. led: diffused epoxy lens, 0.5x0.5mm carbon steel wireframe leads. notes: 1.r1-r4=75ohms,1/16w,5%resistors. 2.c1=1000pf,2kv decoupling capacitor. 3.led compliant with iec60825-1 safety of laser products when operated up to 20ma. 4.led forward voltage: 2.1v(typ).led power dissipation: 105mw.led peak wavelength: green=565nm, yellow=585nm.
|