do not scale from this print ssw-1xx-xx-xxx-x-xx-xxx-xx no of positions -01 thru -50 (-p option: 36 pos max) row specification -s: single -d: double -t: triple -p: single -q: triple with only outer 2 rows filled lead style (see table 1) -01 thru -06 (std. ins. force) -21 thru -24 (low ins. force) plating specification -g: 20" gold in contact area, 3" gold on tail -t: matte tin contact and tail -s: 30" selective gold in contact area, matte tin on tail -h: 30" heavy gold in contact area, 3" gold on tail -e: 50" extra heavy gold in contact area, 3" gold on tail (contact -01 & -02 straight only) -f: 3" flash selective gold in contact area, matte tin on tail -stl: 30" selective gold in contact area, tin/lead (90/10 5%) tail -tl: tin/lead (90/10 5%) contact and tail (available only on lead styles -01) -tm: matte tin contact and tail (contact -21 thru -24 n/a) -sm: 30" selective gold in contact area, matte tin on tail -fm: 3" flash gold selective in contact area, matte tin on tail -l: 10" light selective gold in contact area, matte tin on tail option -ll: locking lead (see fig 4, sheet 2) (n/a in single row, 1 & 2 position) option -ra: right angle (see fig 2, sheet 2) (style -01 & -21 n/a) -n: notch (see fig 6, sheet 3) (only available in -d row) (only available in 5, 7, 8, 10, 12, 13, 15, 17, 20, 25, 32, 36 positions) (use nsw-xx-d-n-xx body, see table 6) polarizing option indicate pos, see fig 3, sheet 2 ((no. of pos x .10[2.5]) + .02[0.5]) .031 x .016[0.41] 0.79 ref (typ) .335 8.51 ref * "b" - .005 + .000 for machine fill only *"b" see note 5 'a' c fig 1 60 .0110 0.280 ref detail 'a' scale 4 : 1 see note 10 .095 2.41 ref -s .095 2.41 ref see note 8 -p .195 4.95 ref .100 2.54 -d .295 7.49 ref .100 2.54 .200 5.08 -t .050 1.27 ref .245 6.22 ref -d-n c bs bs sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] material: assembly, socket strip .016 x .031 tail by: ssw-1xx-xx-xxx-x-xx-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 06/12/1987 3 1 sheet scale: 2:1 f:\dwg\misc\mktg\ssw-1xx-xx-xxx-x-xx-xxx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. maximum cut flash: .015[.38] with no flash below standoffs or in contact holes. 3. minimum contact pushout force: 1.5 lbs. 4. maximum allowable bow: .003[.08] inch/inch. 5. maximum allowable sway: 2 (typ) for hand fill & 1 (typ) for machine fill. 6. maximum allowable variation between rows: .010[.25]. 7. "end walls" after cutting should be .020.003 [.51.08]. 8. notch on -p-ra & -d-ra-n options to be oriented as shown. 9. shear location to be within .001[.03] of the break off center location. 10. shear location to be within .001[.03] of the break off center location for machine fill. 11. lead style x2 (single and double) -ra's to be layer packaged. all other -ra lead styles: under 5 position to be layer packaged, 5 and up to be packaged in tubes. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 insulator: -s, -d, -d-n: vectra e130i, color: black ul94 v0 -p, -t: pct, color: black ul94 v0 contact: phosphor bronze, spring temper alloy 511 or 510 (tensile strength 90-100 ksi) (yeild strength @ 2% offset 88-98 ksi) per mil-b-13501 thickness: .0160.001 [0.6350.03] revision bs
.200 5.08 fig 2 right angle option all options different as shown, otherwise same as -s-ra -t-ra c "f" "d" "e" in-process c c c 90 .060 1.52 "c" (see table 2, sheet 1) -s-ra c c bs .100 2.54 -d-ra c -p-ra see note 8 .100 2.54 -d-ra-n see note 8 c .04 1.0 -s-ll -d-ll -d-ra-ll .04 1.0 -s-ra-ll -t-ll fig 4 locking lead option all options same as -s-xx-ll unless otherwise shown -t-ra-ll .008 - .000 + .005 0.20 0.00 + 0.13 (typ) r .0560 (typ) 1.422 r .0320 0.813 (typ) crimp detail all configurations c 01 c l 01 crimp locations odd positions = crimp location 01 c l 01 c l crimp locations even positions = crimp location 01 c l 01 c l c l 01 c l 01 sheet of assembly, socket strip .016 x .031 tail by: ssw-1xx-xx-xxx-x-xx-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 06/12/1987 3 2 sheet scale: 2:1 revision bs f:\dwg\misc\mktg\ssw-1xx-xx-xxx-x-xx-xxx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
ssw-1xx-03-xxx-s-ra ssw-1xx-23-xxx-s-ra ssw-1xx-03-xxx-d-ra ssw-1xx-23-xxx-d-ra ssw-1xx-02-xxx-t-ra ssw-1xx-02-xxx-q-ra ssw-1xx-03-xxx-d-ra-n ssw-1xx-23-xxx-d-ra-n ssw-1xx-04-xxx-s-ra ssw-1xx-24-xxx-s-ra .050 1.27 ref .245 6.22 ref fig 6 notch option different as shown, otherwise same as fig 1 .190 4.83 ref nsw-xx-d-n-xx (see table 6) 01 50 -s, -p, -s-ra & -p-ra 01 02 99 100 -d, -d-ra fig 3 polarization location (insert pk-06-n into specified position & break off tab) (-ra option shown for orientation purpose only) 01 03 148 150 -t, -q, -t-ra & -q-ra -d-n, -d-ra-n 01 02 99 100 fig 5 packaging views (see note 11) bs sheet of assembly, socket strip .016 x .031 tail by: ssw-1xx-xx-xxx-x-xx-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 06/12/1987 3 3 sheet scale: 2:1 revision bs f:\dwg\misc\mktg\ssw-1xx-xx-xxx-x-xx-xxx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
