View LTM150XO-L01_5367329.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1bhf ( %pd/p -5.90- .0%&- approval specification approval specification samsung tft-lcd model : LTM150XO-L01 samsung tft samsung tft - - lcd lcd model model : : ltm150xo ltm150xo - - l01 l01 date : 08/nov/2005 any modification of specification is not allowed without sec's permission. lcd application engineering 2, tcs team samsung electronics co . , ltd. note : date 4*(/"563& customer customer ? ? s approval s approval date 24/oct/?05 13&1"3&%#: date 24/oct/?05 "11307"&%#: customer : general www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification contents revision history ------------ ------------------- -------------------- ------------------- ---------------- (3) general description --------------- ----------------------- ---------------- --------------- ------------ (4) 1. absolute maximum ratings ------------------ ----------------- ------------------ -------------- (5) 2. optical characteristics ------ -------------------- ----------------- ------------------ ------------- (7) 3. electrical characteristics -- ------------------- ------------------- ------------------ --------------(11) 3.1 tft lcd module 3.2 back light unit 4. block diagram ---------------- ------------------ ------------------ ---------------- --------------- (16) 4.1 tft lcd module 4.2 back light unit 5. input terminal pin assignment --------------------- ----------------------- ------------------ (17) 5.1 input signal & power 5.2 lvds interface 5.3 back light unit 5.4 input signals, basic display colo rs and gray scale of each color 6. interface timing ------- ------------------- -------------------- ------------------- ---------------- (23) 6.1 timing parameters (de only mode) 6.2 timing diagrams of inte rface signal (de only mode) 6.3 power on/off sequence 6.4 vdd power dip condition 7. outline dimension ---- -------------------- -------------------- ------------------- ---------------- (27) 8. reliability test ------- ----------------- ---------------------- --------------- ----------------------- (39) 9. packing -------- ------------------ ----------------------- ---------------- --------------- ------------ (30) 10. marking & others ---- ------------------- -------------------- ------------------- ----------------- (31) 11. general precaution -- -------------------- -------------------- ------------------- --------------- (33) 11.1 handling 11.2 storage 11.3 operation 11.4 others www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification * revision history approval specification of LTM150XO-L01 model was issued first. all 000 nov. 08, 2005 summary page rev. no date www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification LTM150XO-L01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft(thin film transistor) as switch ing components. this model is composed of a tft lcd panel, a driver circuit and a back lig ht unit. the resolution of a 15.0? is 1024 x 768 and this model can display up to 16.2 millions colors. ? workstation & desktop monitors ? display terminals for av application products ? monitors for industrial machine * if the module is used to other applicati ons besides the above, please contact sec in advance. features general description description applications ? rohs compliance (pb-free) ? high contrast ratio, high apertu re ratio, fast response time ? tn(twisted nematic) mode ? 2 ccfts(cold cathode fluorescent tube) ? de(data enable) mode ? lvds (low voltage differential si gnaling) interface (1pixel/clock) ? compact size design general information 11.27 watt (typ.) power consumption mm 0.297(h) x 0.297(w) pixel pitch mm 304.128(h) x 228.096(v) active display area note haze 25%, hard-coating (3h) surface treatment cd/ ] 250(typ.) luminance of white normally white display mode rgb vertical stripe pixel arrangement pixel 1024 x 768 number of pixels colors 6 bit - 16.2m display colors unit specification items www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification note (1) mechanic al tolerance is ? 0.5mm unless there is a special comment. mechanical information - 1.050 12.0 254.0 327.0 max. w/ inverter assembly g - - lcd module only g - - weight mm - - depth (d) mm 253.5 253.0 vertical (v) w/o inverter ass?y mm 326.5 326.0 horizontal (h) module size note unit typ. min. item (1) v 4.0 gnd-0.3 v dd power supply voltage v 3.3 - v sig data signal (4) g 1.5 - v nop vibration ( non - operating ) (3) g 50 - s nop shock ( non - operating ) (2) ? 50 0 t opr center of glass surface temperature (operation) (2) ? 60 -25 t stg storage temperature note unit max. min. symbol item 1. absolute maximum ratings if the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device. note (1) ta= 25 ? 2 ? c www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification (2) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. maximum wet-bulb temperature at 39 ? c or less. (ta ? 39 ? c) c. no condensation (3) 11ms, sine wave, one time for ? x, ? y, ? z axis (4) 10-300 hz, sweep rate 10min, 30min for x,y,z axis (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) fig. temperature and relative humidity range www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 2. optical characteristics (8) sr-3 degrees - 75 - cr ? 10 ? l hor. viewing angle - 75 - ? u ver. - 60 - ? d - 75 - ? r (4) sr-3 % 25 - - b uni brightness uniformity (9 points) k - 6,500 - - color temperature % - 60 - - color gamut (7),(8) sr-3 (6) sr-3 cd/m2 - 250 200 y l luminance of white (center of screen) (5) bm-7 4 2.0 - tr rising response time msec 10 6.0 - tf falling normal ? l,r =0 ? u,d =0 viewing angle - 0.468 - wv' - 0.198 - wu' white - 0.214 - bv' - 0.159 - bu' blue - 0.558 - gv' - 0.128 - gu' green - 0.521 - rv' - 0.442 - ru' red color chromaticity (cie 1976) 0.359 0.329 0.299 wy 0.343 0.313 0.283 wx white 0.120 0.090 0.060 by 0.180 0.150 0.120 bx blue 0.610 0.580 0.550 gy 0.330 0.300 0.270 gx green 0.360 0.330 0.300 ry 0.660 0.630 0.600 rx red color chromaticity (cie 1931) (3) sr-3 - 700 500 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item the optical characteristics should be measured in a dark r oom or equivalent. measuring equipment : topcon bm-7,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd=3.3v, fv= 60hz, f dclk=65mhz, il = 8.0marms) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. this should be measured in the center of screen. single lamp current : 8.0ma environment condition : ta = 25 ? 2 ? c 2 ? bm-7 1 ? sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 50 y bm-7 : 50 y field www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification note (2) definition of test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gra y min (gmin) at the center point ? of the panel note (4) definition of 9 points brightness uniformity note (5) definition of response time : sum of tr, tf buni bb b = ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black 100% 90% 10% 0% optical instruments response display data white(tft off) bl ack(tft on) white(tft off) 6 8 7 9 3 2 1 4 5 128 512 896 98 384 670 active area : test point www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification note (6) definition of lum inance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931, cie1976) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (cr ? 10) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 3.1 tft lcd module the connector for display data & timing signal should be connected. ta = 25 ? c input current common mode voltage input voltage range (single-ended) differential input voltage lvds skew differential input voltage for lvds receiver threshold (4) v 2.4 0 v in (5) u ? 10 i in (4) v 2.4- |v id |/2 1.2 0+ |v id |/2 v cm (4) mv 600 200 |v id | (3) ps 380 -380 t skew (8) a 3.0 - - i rush rush current mhz 80 65 50 f dclk main frequency khz 62 48.4 47.6 f h hsync frequency hz 77 60 55 f v vsync frequency ma 800 700 - (c) dot ma - 600 - (b) white (6),(7) ma - 650 - i dd (a) black current of power supply mv - - -100 low (2) mv +100 - - high lvds input characteri stics (1) v 3.6 3.3 3.0 v dd voltage of power supply note unit max. typ. min. symbol item note (1) the ripple voltage shou ld be controlled under 10% of v dd . 3. electrical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification (2) differential receiver voltage definitions and propagation delay and transition time test circuit a. all input pulses have frequency = 10mhz, t r or t f =1ns b. c l includes all probe and fixture capacitance note a. note b. (4) definition of v id and v cm using single-end signals (3) lvds receiver dc parameters are m easured under static and steady conditions which may not be reflective of it s performance in the end application. where tskew : skew between lvds clock & lvds data, t : 1 period time of lvds clock cf) (-/+) of 380psec means lvds dat a goes before or after lvds clock. differential lvds data rx +/- t skew t v diff = 0v v diff = 0v differential lvds clk www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification (5) measurement conditions maxi mum + 10ua @ vin=2.4v, vdd=3.6v, - 10ua @ vin=0v, vdd=3.6v (6) fv=60hz, fdclk = 65mhz, vdd = 3.3v, dc current. (7) power dissipation check pattern (lcd module only) rush current i rush can be measured when t rush . is 470 k . t rush =470 k 100% gnd 90% 10% v dd (8) measurement conditions. a) black pattern b) white pattern c) dot pattern www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification the back light unit is an edge - li ghting type with 2 ccfts ( cold cathode fluorescent tube ) the characteristics of two dual lamps are shown in the following tables. ta=25 ? 2 ? c (2) % 25 - - i uni lamp current uniformity 25 ? : 1,220 (6) vrms 0 ? : 1,400 - - vs startup voltage 1.5554 1.414 1.2726 wdis distortion rate (5) % 10 - - wasy asymmetry rate inverter waveform (4) hour - - 50,000 hr operating life time (3) khz 60 - 40 f l lamp frequency vrms - 560 - v l lamp voltage (1) marms 9.0 8.0 3.0 i l lamp current note unit max. typ. min. symbol item note (1) specified values are for a single lamp. lamp current is measured with current meter for high frequency as shown below. refer to the following block diagram of the back light unit for more information. fig. measurement point of lamp current hot(blue) cold(black) i 1 i 2 inverter (sk1540) hot(pink) cold(white) a a 3.2 back light unit lcd module www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification (3) lamp frequency which may produce inte rference with horizontal synchronous frequency may cause line flow on the displa y. therefore lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. (4) life time (hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less than its original val ue at the condition of ta = 25 ? 2 ? c and i l = 8marms (2) define of lamp current uniformity : i uni i uni = ? || ii i max min max 100 i max : maximum lamp current i min : minimum lamp current lamp current uniformity i uni should be less than 25% (5) designing a system inverter intended to have better display performance, power efficiency and lamp reliability. they would help increase the lamp lifetime and reduce leakage current. a. the measurement should be done at typical lamp current. b. the asymmetry rate of the inve rter waveform s hould be less than 10%. c. the distortion rate of the waveform should be 2 2 with ? 10% tolerance. - inverter output waveform had better be more similar to ideal sine wave. || ii i rms p-p ? 100 ? asymmetry rate ? distortion rate (6) if an inverter has shutdown function, it should keep its output for over 1 second even if the lamp connector is open. ot herwise the lamps may not be turned on. fig. wave form of the inverter || i i rms p || i i rms -p or i p i -p www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 4. block diagram 4.2 back light unit power circuit column driver circuit tft-lcd (1024 x rgb x 768 pixels) s1 s1024 timing controller source driver circuit lvds (rx) lvds(tx) rsds(tx) control signal video data (30pin) lvds pair +3.3v v dd 4.1 tft lcd module lamp(ccel) lamp(ccel) 1 3 lamp(ccel) lamp(ccel) 1 3 hot(pink) cold(white) hot(blue) cold(black) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 5.1. input signal & power ( connector : hi rose df14h-20p-1.25h or equivalent) * if the system already uses the 19, 20p ins, it should keep under gnd level the voltage applied to those pins should not exceed -200mv. 5. input terminal pin assignment 'ps-$%joufsobmvtfpomz%popu$poofdu $5- 20 'ps-$%joufsobmvtfpomz%popu$poofdu $& 19 odd receiver signal(+) od-rx3+ 18 odd receiver signal(-) od-rx3- 17 ground gnd 16 odd receiver clock signal(+) od-rxclk+ 15 odd receiver clock signal(-) od-rxclk- 14 ground gnd 13 odd receiver signal(+) od-rx2+ 12 odd receiver signal(-) od-rx2- 11 ground gnd 10 odd receiver signal(+) od-rx1+ 9 odd receiver signal(-) od-rx1- 8 ground gnd 7 odd receiver signal(+) od-rx0+ 6 odd receiver signal(-) od-rx0- 5 ground gnd 4 ground gnd 3 power supply 3.3v vdd 2 power supply 3.3v vdd 1 remark function symbol pin no. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification note) pin number starts from right side pin no. 20 pin no. 1 pcb a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all nc pins should be separated from other signal or power. fig. connector diagram hirose df14h-20p-1.25h ? #20 #1 ? #20 #1 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 5.2 lvds interface 5.2.1 pixel data note : the lcd module uses a 100ohm resi stor between positive and negative lines of each receiver input. df14h-20p-1.25h www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 5.2.2 timing diagrams of lvds for transmitting lvds receiver : integrated t-con www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 5.3 back light unit jst bhr-03vs-1 or equivalent connector part no. ground white(u), black(d) cold1 3 no connection - nc 2 high voltage pink(u), blue(d) hot1 1 function color input pin no. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 5.4 input signals, basic display colo rs and gray scale of each color b252 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b252 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b252 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of gree n r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magent a - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colo r b7 b6 b5 b4 b3 b2 b1 b0 g 7 g6 g 5 g 4 g3 g 2 g 1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) colo r note (1) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level vo ltage, 1 = high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 6.1 timing parameters ( de only mode ) $mpdlt clocks 1494 1344 1244 t h horizontal total $mpdlt clocks 1024 1024 1024 t hd active display period horizontal display term - lines 870 806 772 t vb vertical total - lines - 768 - t vd active display period vertical display term - hz 77 60 55 f v vsync - khz 62 48.4 47.6 f h hsync - mhz 80 65 50 1/t c frequency clock note unit max. typ. min. symbol item signal note (1) this product is de only m ode. the input of h sync & vsync signal does not have an effect on normal operation. (2) test point : ttl control signal and cl k at lvds tx input terminal in system (3) internal vcc = 3.3v 6. interface timing www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 6.2 timing diagrams of interface signal ( de only mode ) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 6.3 power on/off sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid dat a to b/l enable at power on. t6 : the time from valid data off to b/l disable at power off. ? the supply voltage of the external system for the module input should be the same as the definition of v dd . ? apply the lamp voltage within the lcd oper ation range. when the back light turns on before the lcd operation or the lcd turn s off before the back light turns off, the display may momentarily show abnormal screen. ? in case of v dd = off level, please keep the level of input signals low or keep a high impedance. ? t4 should be measured after the module has been fully discharged between power off and on period. ? interface signal should not be kept at high impedance when the power is on. 300 k? t1 ? 10msec 0 ? t2 ? 50msec 0 ? t3 ? 50msec 1sec ? t4 back-light (recommended) 500msec ? t5 100msec ? t6 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 6.4 vdd power dip condition note (1) the above conditions are fo r the glitch of the input voltage. (2) for stable operation of an lcd m odule power, please follow them. i.e., if typ vdd x 80% ? vcc ? typ vdd x 90%, then t d should be less than 20ms. t d v cc v dd gnd 90% 80% 3.0v ? v dd ? 3.6v if v dd (typ.) x 80% ? v cc ? v dd (typ) x 90% then, 0

1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 7. outline dimension [ refer to the next page ] www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification operating non- operating 3 30min/axis 1.5g , 10~300 hz x/y/z axis , sweep rate : 10 min vibration (non-operating) 3 ? 10kv cdm : 150pf, 330 ? , 9point, 3 times/point esd 3 ? 8kv contact : 150pf, 330 ? , 100point, once/point 3 ? 15kv air(non-contact) : 150pf, 330 ? , 100point, once/point 3 3 72hrs operating : 0~10,000ft non-operating : 0~50,000ft altitude 3 1 time/axis 50g , 11msec sine wave , ? x/y/z axis shock (non-operating) 5 1 angle , 3 edge , 6 side , 66 cm box drop 5 100 cycle -20 ? c/30min ~ +60 ? c/30min , no bias thermal cycle 5 500 hrs -30 ? c , no bias lts*** 5 500 hrs 70 ? c , no bias hts*** 5 500 hrs 40 ? c / 95% , bias thb** 5 500 hrs 0 ? c , bias ltol* 12 500 hrs 50 ? c , bias htol* sample time/cycle conditions test items [ result evaluation criteria] under the display quality test conditions with normal operation state, these should be no change which may affect practical display functions. * htol/ ltol : high/low te mperature operating life ** thb : temperature humidity bias *** hts/lts : high/low temperature storage 8. reliability test www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 9.1 carton (internal package) (1) packing form corrugated fiberboard box and corrugated cardboard as shock absorber (2) packing method a. without inverter note a. total weight : approx. 11kg b. acceptance number of pilling : 10 sets c. carton size : 326(m) x 376(d) x 412(h) d. max accumulation quantity : 5 cartons 9. packing shielding-bag cushion-pad panel-protector tape-paper(2-point) cushion-cover packing-case cellophane adhesive tape box label opp-tape www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 1 set carton 4 2 pics pictorial marking 3 1 set packing case(inner box) included shock absorber 2 10 static electric protective sack 1 quality part name no (3) packing material 10. marking & others a nameplate bearing followed by is affix ed to a shipped product at the specified location on each product. (1) parts number : LTM150XO-L01 (2) revision: three letters (3) lot number : x x x x xxx xx x cell position no. (in the glass) glass no. (in the one lot) lot no. (glass) month year product code line week code : 05 02 week month (4) nameplate indication LTM150XO-L01 [lot number] 40mm 80mm [revision] www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification part number revision code box serial number 40mm LTM150XO-L01 80mm (6) others a. after service part lamps cannot be replaced because of the narrow bezel structure. (5) packing box attach www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification (a) when the module is assembled, it s hould be attached to the system firmly using all mounting holes. be carefu l not to twist and bend the module. (b) because the inverter uses high volt ages, it should be disconnected from power source before it is assembled or disassembled. (c) refrain from strong mechanical s hock and / or any force to the module. in addition to damage, it may cause improper operation or damage to the module and ccft back light. (d) note that polarizer films are ve ry fragile and could be damaged easily. do not press or scratch the surfac e harder than a hb pencil lead. (e) wipe off water droplets or oil immediat ely. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) desirable cleaners are water, ip a (isopropyl alcohol) or hexane. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might cause perm anent damage to the polarizer due to chemical reaction. (h) if the liquid crystal mate rial leaks from the panel, it should be kept away from the eyes or mouth . in case of c ontact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the modul e should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. 11. general precautions 11.1 handling www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 11.2 storage (a) do not leave the module in high temper ature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd m odule in direct sunlight. (c) the module should be stored in a dark place. it is prohibi ted to apply sunlight or fluorescent light in storing. 11.3 operation (a) do not connect or disconnect the m odule in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequency circuits. su fficient suppression to the electromagnetic interference should be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back light connec tor and its inverter power supply should be connected directly with a minimi zed length. a longer cable between the back light and the inverter may caus e lower luminance of lamp(ccft) and may require higher startup voltage(vs). 11.4 operation condition guide (a) the lcd product should be operated under normal conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 65 ? 20% - display pattern : continually changing pattern (not stationary) (b) if the product will be used in extreme conditions such as high temperature, humidity, display patterns or operati on time etc.., it is strongly recommended to contact sec for application engineeri ng advice. otherwise, its reliability and function may not be guaranteed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf ( %pd/p -5.90- .0%&- approval specification approval specification 11.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may resu lt in improper operation or disconnection of electrode. (c) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps displaying the sa me pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pc b's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTM150XO-L01

	To Download LTM150XO-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .