patent no. 4912620 nfs200 series triple and quad output [ 2 year warranty ] ? 5.0 x 9.0 x 2.5 inch package ? overvoltage and short circuit protection ? 200w with 30cfm ? adjustable outputs ? isolated outputs ? power fail detect signals ? en55022, en55011 conducted emissions level a ? ul, vde, csa and babt safety approvals the nfs200 series is a 200w universal input ac/dc power supply in a 5 x 9 x 2.5 inch package. the nfs200 series has four multiple output models and has proven itself to be highly reliable and versatile product for a wide range of communication and industrial applications, with a very high peak capability on the auxiliary outputs for drive and motor applications. the nfs200 provides 200w of output power with 30cfm of air. standard features include overvoltage and short circuit protection, adjustable outputs, isolated outputs and power fail detect. the series, with full international safety approval and the ce mark, meets conducted emissions en55022 level a. the nfs200 series is designed for use in medium power data networking, computer, telecom and industrial applications such as servers, pabx's, printers and process automation. specification all specifications are typical at nominal input, full load at 25 c unless otherwise stated page 1 output specifications voltage adjustability +5v output 5.0% line regulation ll to hl, fl 0.1% max. main output load regulation main output 2.0% max. auxiliary outputs 2.5% max. overshoot/undershoot at turn-on 0% transient response +5v 200mv max. dev. (20a to 30a step) 500s recovery to 1.0% temperature coefficient all outputs 0.02%/c overvoltage protection +5v output 6.25v0.5v short circuit protection yes, with auto-recovery fan output current j1: pins 3 and 4 12.1v @ 0.75a max. (see note 8) input specifications input voltage range universal input 90vac to 264vac 130vdc to 370vdc input frequency range 47hz to 63hz input surge current 110vac, 60hz 40a max. 230vac, 50hz 80a max. safety ground 110vac, 60hz 0.9ma max. leakage current 230vac, 50hz 1.6ma max. emc characteristics conducted emissions en55022, fcc part 15 level a radiated emissions en55022, fcc part 15 level a esd air en61000-4-2, level 3 perf. criteria 1 esd contact en61000-4-2, level 4 perf. criteria 1 surge en61000-4-5, level 3 perf. criteria 1 fast transients en61000-4-4, level 3 perf. criteria 1 radiated immunity en61000-4-3, level 3 perf. criteria 1 conducted immunity en61000-4-6, level 3 perf. criteria 1 general specifications hold-up time 110vac 15ms after pfd flag @ 200w 5ms efficiency 110/230vac @ 200w 70% typ. isolation voltage input/output 3000vac input/chassis 1500vac switching frequency variable 80 to 100khz standards and vde0805, en60950, iec950 approvals iec1010, ul1950, babt (see note 9) csa c22.2 no. 950 weight 1.34kg (47.30oz) mtbf (see note 1) mil-hdbk-217e 84,000 hours environmental specifications thermal performance operating 0c to +70c (see notes 3, 10) non-operating -40c to +85c 0c to 50c ambient, 200w 30cfm forced air 50c to 70c ambient, derate linearly 30cfm forced air to 100w at 70c relative humidity non-condensing 5% to 95% rh altitude operating 10,000 feet max. non-operating 40,000 feet max. vibration three orthogonal 2.4g rms axes, random vibration, 5 to 500hz 10 minute test for each axis
pin connections tb1 nfs200-7601 nfs200-7602 NFS200-7603 nfs200-7608 term 1 ac line ac line ac line ac line term 2 ac neutral ac neutral ac neutral ac neutral term 3 safety ground safety ground safety ground safety ground tb2 term 1 +5.1v +5.1v +5.1v +5.1v term 2 +5.1v +5.1v +5.1v +5.1v term 3 return return return return term 4 return return return return term 5 return return return return term 6 +12.1v +12.1v +12.1v +12.1v term 7 C12.1v C12.1v C12.1v C12.1v term 8 C5.2v (6) 24v return (7) 12v return (7) term 9 C5.2v return (6) +24v (7) +12v (7) term 10 j1 pin 1 pfd pfd pfd pfd pin 2 pfd return pfd return pfd return pfd return pin 3 fan return fan return fan return fan return pin 4 (8) fan fan fan fan notes 1 25w minimum total output load required for reliable operation. also, 12v output peak current capability requires a +5.1v @ 5a minimum load. 2 peak output current lasting less than 30 seconds with duty cycle less than 10%. during peak loading, outputs may drift outside total regulation limits. 3 requires forced air, 30cfm minimum, or 350lfm. 4 figure is peak-to-peak. output noise is measured across a 50mhz bandwidth using a 12 inch twisted pair, terminated with a 47f capacitor. 5 total regulation is defined as the static output regulation at 25c, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. 6 although the C5.2v return is electrically connected to the main return (terminals 3, 4 and 5, which are all connected together), artesyn technologies recommends that system cabling allow C5.2v return current flow to terminal 9. 7 the auxiliary output is floating, and can be referenced as either positive or negative. the return is the negative terminal of the pair. 8 any fan current must be subtracted from the total available +12.1v current. supplied fans draw 0.14a. 9 this product is only for installation by professional installers within other equipment and must not be operated as a stand alone product. 10 derating curve is application specific for ambient temperatures >50c, for optimum reliability no part of the heat sink should exceed 90c and no semi-conductor temperature should exceed 100c. international safety standard approvals vde0805/en60950/iec950/iec1010 file no. 10401-3336-1058 licence no. 3613 ul1950 file no. e136005 csa c22.2 no. 950 file no. lr41062c certificate no. ps/603176 200 watt ac/dc universal input switch mode power supplies low to medium power ac/dc power supplies | 200w ac/dc page 2 http://www.artesyn.com output output currents ripple (4) total model number (a) voltage min (1) peak (2) max (3) regulation (5) open frame cased +5.1v 5.0a 30a 30.0a 50mv 2% nfs200-7601 (6) nfs200-7601cf (6) +12.1v 0a 12a 8.0a 120mv 2.5% C12.1v 0a 5.0a 4.0a 120mv 2.5% C5.2v (6) 0a 6.0a 6.0a 50mv 2.5% +5.1v 5.0a 30a 30.0a 50mv 2% nfs200-7602 (7) nfs200-7602cf (7) +12.1v 0a 12a 8.0a 120mv 2.5% C12.1v 0a 5.0a 4.0a 120mv 2.5% 24.0v (7) 0a 3.0a 3.0a 240mv 2.5% +5.1v 5.0a 30a 30.0a 50mv 2% NFS200-7603 (7) NFS200-7603cf (7) +12.1v 0a 12a 8.0a 120mv 2.5% C12.1v 0a 5.0a 4.0a 120mv 2.5% 12.0v (7) 0a 4.0a 4.0a 120mv 2.5% +5.1v 5.0a 30a 30a 50mv 2.5% nfs200-7608 nfs200-7608cf +12.1v 0a 12.0a 8.0a 120mv 2.5% -12.1v 0a 5.0a 4.0a 120mv 2.5%
0.30 (7.62) 1.00 (25.4) 1.800 (45.72) 2.5 (63.5) 8-32 screw thread (4 places) 0.79 (20.07) 1.00 (25.4) 3.530 (89.66) 5.00 (127) ref. 8-32 screw thread (4 places) max. screw penetration from bottom of chassis 0.250 (6.35) 7.00 (177.8) 9.00 (229) ref preferred air-flow direction tb2 term. 1 + 5v adjust j1 pin 1 on top tb1 term 1 line neutral ground l2 f1 c7 c6 all dimensions in inches (mm) t1 ac (tb1) connector kulka p/n 4597a-6/32-03 or equivalent dc (tb2) connector kulka p/n 4597a-6/32-09 or equivalent j1 mating connector molex 22-01-1043 or equivalent with 4809 series or equivalent crimp terminal mechanical notes a a standard cover and fan assembly can be added during manufacturing. details are on page 84. to order, add suffix cf to the model number. e.g. nfs200-7601cf. power fail detect signal 50ms t1 200ms t2 will vary with line and load t3 3 5ms pout: 200w pfd output is an open collector which will sink 40ma in the low state high t1 t2 t3 4.75v 3.5v min 0-4 max low 4.75v 5v output pfd signal ac input 25w minimum load required 200w 0w 25w 100w forced air cooling 0 c 10 c 20 c 30 c 40 c 50 c 60 c 70 c derating curve output power (watts) page 3 200 watt ac/dc universal input switch mode power supplies 200w ac/dc | low to medium power ac/dc power supplies
page 4 http://www.artesyn.com ds_nfs200_19980401.pdf data sheet ? artesyn technologies, reg. u.s. pat. & tm. off, 2000 the information and specifications contained in this data sheet are believed to be correct at time of publication. however, ar tesyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompa ny the sale of any such product(s) or information contained herein.
|
