? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 two-way power divider, 10 - 500 mhz rev. v3 ds-109 / ds-319 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? 1 o phase balance maximum ? 35 db typical midband isolation ? 1.1 typical midband vswr ? vswr: 1.2:1 typical midband ? impedance: 50 ohms nominal ? maximum power rating or input power: 1w max. ? internal load dissipation: 0.05 mw max. ? mil-std-202 screening available description a power divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. fp-2 (ds-109) to-8-2 (ds-319) pin configuration (ds-319) pin no. function pin no. function 1 gnd 7 gnd 2 output d 8 output c 3 gnd 9 gnd 4 gnd 10 gnd 5 ? 11 gnd 6 gnd 12 gnd pin configuration (ds-109) pin no. function pin no. function 1 5 gnd 2 gnd 6 gnd 3 gnd 7 gnd 4 output c 8 output d
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 two-way power divider, 10 - 500 mhz rev. v3 ds-109 / ds-319 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ds-109 electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max insertion loss less coupling 10 - 500 mhz db ? ? 0.6 isolation ? 10 - 500 mhz db 25 ? ? amplitude balance ? 10 - 500 mhz db ? ? 0.15 phase balance ? 10 - 500 mhz ? ? 1 vswr all ports 10 - 500 mhz ratio ? ? 1.3:1 1. all specifications apply with 50 ohm source and load impedance. ds-319 electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max insertion loss less coupling 10 - 200 mhz 10 - 500 mhz db db ? ? ? ? 0.6 0.9 isolation ? 10 - 500 mhz db 25 ? ? amplitude balance ? 10 - 200 mhz 10 - 500 mhz db db ? ? ? ? 0.15 0.2 phase balance ? 10 - 500 mhz ? ? 1 vswr all ports 10 - 200 mhz 10 - 500 mhz ratio ratio ? ? ? ? 1.3:1 1.6:1
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 two-way power divider, 10 - 500 mhz rev. v3 ds-109 / ds-319 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves ordering information isolation - ports c-d insertion loss - ports -c, ? d vswr part number package ds-109 pin fp-2 ds-319 pin to-8-2
|