grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com pushbutton switches butt contact pushbutton switches series 30 and 46 snap-in panel mount features ? sleek black matte bezel ? convenient snap-in front mount ? choice of 6 button colors ? spst, spdt or dpdt circuitry ? alternate action, positive feel and overtravel versions ? printed button option butt contact switches - series 30 spst-n.o. .205 (5,21) 1.119 (28,42) .062 .010 (1,57 0,25) 10 4 oz. 30-001-a-* spst-n.o., overtravel .205 (5,21) 1.204 (30,58) .125 .020 (3,18 0,51) 8 4 oz. 30-015-a-* spst-n.o., overtravel & positive feel adjustable** adjustable** .156 .015 (3,96 0,38) 18 4 oz. 30-017-a-* spst-n.o., economical .205 (5,21) 1.119 (28,42) .062 .010 (1,57 0,25) 10 4 oz. 30-601-a-* spst-n.c. .205 (5,21) 1.132 (28,75) .065 .015 (1,65 0,38) 8 4 oz. 30-002-a-* wiping contact switches - series 46 spdt, bbm .205 (5,21) 1.417 (35,99) .180 (4,57) min. 1.1 .25 lbs. 46-102-a-* spdt, mbb .205 (5,21) 1.417 (35,99) .180 (4,57) min. 1.1 .25 lbs. 46-111-a-* spdt, bbm, alternate action .293 (7,44) 1.448 (36,78) .180 (4,57) min. 1.5 .25 lbs. 46-502-a-* dpdt, bbm .205 (5,21) 1.448 (36,78) .180 (4,57) min. 2.2 .5 lbs. 46-200-a-* dpdt, mbb .205 (5,21) 1.448 (36,78) .180 (4,57) min. 2.2 .5 lbs. 46-201-a-* dpdt, bbm, alternate action .293 (7,44) 1.448 (36,78) .180 (4,57) min. 1.8 .5 lbs. 46-402-a-* additional dimensions and part numbers *partial part number, complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see ordering information. circuitry switches have momentary action unless otherwise indicated in the chart below. **adjustable from dim. a .170 (4,32) minimum, dim. b 1.285 (32,64) maximum to dim. a .290 (7,37) maximum, dim. b 1.165 (29,59) minimum with hex nut below bezel. dimensions in inches (and millimeters) .800 (20,32) sq. .600 (15,24) .180 (4,57) typ. dim. a: dim. b: button height behind panel ( .015) length ( .040) circuitry and total actuating partial features travel force part no.* tolerances are .010 (0,25) unless otherwise specified. for bottom views and terminal markings, see series 30 and 46 switches without bezels. hex nut for 30-017-a is 9/16" (14,29) across flats and .094 (2,38) thick. .485 (12,32) sq. .063 (1,60) .527 (13,39) dim. a see chart .015 (0,38) dim. b see chart .040 (1,02) .738 (18,75) 1.016 (25,81) ref. label* *part number and e.i.a. date code label spdt - bbm n.c. n.o. c. dpdt bbm n.c. n.o. c1 n.c. n.o. c2 n.o. n.c. c. spdt mbb dpdt mbb n.o. n.c. c. n.o. n.c. c. pushbutton 48
grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com pushbutton switches butt contact pushbutton switches specifications life limiting criteria?series 30 & 46 contact resistance: less than 25 milliohms on a new switch voltage breakdown : 1,000 vac between mutually insulated parts insulation resistance: 1,000 megohms minimum ratings?series 30 current rating: 30-601 150 ma, 5 vdc resistive and 20 ma, 20 vdc resistive all others 1 a, 115 vac resistive, or 0.5 a, 220 vac resistive life expectancy: 30-015 500,000 operations 30-017 200,000 operations all others 1,000,000 operations ratings?series 46 current rating: 250 ma, 115 vac resistive or 125 ma, 220 vac resistive life expectancy: 250,000 operations materials and finishes?series 30 bezel: nylon button cap: abs plastic switch bushing: brass, tin zinc base: thermoset plastic spring: tinned music wire plunger: polycarbonate shorting bar: 30-601 brass, gold-plated over nickel all others brass with fine silver contact area base contacts: 30-601 brass, gold-plated over nickel 30-002 brass with fine silver contact area all others bronze with fine silver contact area terminals: 30-002 brass, silver-plated 30-601 bronze, gold-plated over nickel all others bronze, silver-plated nut: provided only on 30-017; allows button height adjustment. brass, zinc trivalent chromate-plated. materials and finishes?series 46 bezel: nylon button cap: abs plastic switch bushing: brass, zinc trivalent chromate-plated. base: thermoset plastic spring: tinned music wire plunger: 46-402/502 nickel-plated brass all others polycarbonate shorting bar: phosphor bronze, silver-plated base contacts: phosphor bronze with silver contact area terminals: phosphor bronze,tin/silver plating covers (46-200/201): brass, zinc trivalent chromate-plated just snap into pre-cut panel hole. plastic wings lock switch in place. panel cutout recommended panel cut switch will fit panels .049" (1,24) to .125" (3,18) thick. recommended panel thickness is 18 gauge. mounting easy snap-in mounting standard options epoxy-sealed terminals and wire leads, see page e-35. ordering information 01 = white 03 = red 04 = green 05 = blue 06 = yellow 07 = black 46-200-a-03 use the partial part number you have selected from the dimensions and part number chart, and add the button color suffix. example: color: 01, 03, 04, 05, 06, 07 .005 (0,13) maximum radius .750" (19,05) square legending option contact grayhill a button legend can be printed in epoxy ink which bonds to the surface of the button cap. any type style or design which can be photographed can be used to produce the legend. there is a per-button printing charge. a nominal set up charge per legend applies to orders of 1 to 99 pieces. non-standard legends are subject to one time artwork and tooling charges. consult grayhill for help with actual legend. pushbutton 50
pushbutton switches grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com butt contact pushbutton switches series 30 and 46 decorator line features ? attractive front panel bezels (6 choices) ? space-saving: only 5/8" diameter (spst & spdt) and 3/4" diameter (dpdt) round bezels ? spst with option of positive feel ? spdt, dpdt with momentary contact or alternate action ? sturdy metal sleeve or bushing and nut provide secure mounting ? ul recognized version spdtCbreak before make spstCnormally open partial part no. feature dim. f dim. a momentary 46-05-05-502-* .992 (25,20) alt. action 46-05-07-502-* 1.278 (32,46) partial part no. feature dim. a momentary 30-05-01-502-* .710 (18,03) pos. feel 30-05-04-502-* .910 (23,11) partial part no. feature dim. a 46-05-05-502-* 46-05-07-502-* 30-05-01-502-* 30-05-04-502-* circuitry dimensions in inches (and millimeters) *partial part number; complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see ordering information. ** contact grayhill for part number. mounting hardware for 46-05-08-502 & 46-05-09-502: one internal tooth lockwasher one knurled ring nut .765 .010 (19,43 0,25) dia. .094 .010 (2,39 0,25) thk. for spst & spdt switches one internal tooth lockwasher one knurled ring nut .640 .010 (16,26 0,25) dia. .094 .010 (2,39 0,25) thk. recommended panel cutout and mounting hardware note: all switches fit panels up to .250 (6,35) thick, except 46-05-08-502 which fits panels up to .187 (4,75) thick. front and back panel access required for installation. .440 (11,17) min. across flats .516 (13,10) min. dia. .565 (14,35) min. across flats .641 (16,28) min. dia. spst and spdt version dpdt version momentary 46-05-08-502-* 1.001 (25,43) .314 (7,98) alt. action 46-05-09-502-* 1.130 (28,70) .355 (9,02) terminals are marked on switch. terminals are marked on switch. dpdtCbreak before make 46-05-08-502-* (ul)** 46-05-09-502-* nc no c .430 .005 (10,92 0,13) across flats 1/2-32 un-2a thread b = .375 .010 (9,53 0,25) dia. c = .625 .005 (15,88 0,13) dia. d = .255 .032 (6,48 0,81) e = .093 .010 (2,36 0,25) f = .355 .015 (9,02 0,38) g = .150 .010 (3,81 0,25) dim a .015 (0,38) (see chart) f d e g .187 .015 (4,75 0,38) insulating barrier b c label* *part number and e.i.a. date code label .555 .005 (14,10 0,13) across flats 5/8-32 un-2a thread insulating barrier b = .375 .010 (9,35 0,25) dia. c = .750 .005 (19,05 0,13) dia. d = .255 .032 (6,48 0,81) f = see chart .015 (0,38) e = .093 .010 (2,36 0,25) g = .150 .010 (3,81 0,25) dim a .015 (0,38) (see chart) f d e g .187 .015 (4,75 0,38) no no c c nc nc b c label* *part number and e.i.a. date code label .100 .005 (2,54 0,13) .430 .005 (10,92 0,13) across flats 1/2-32 un-2a thread b = .375 .010 (9,53 0,25) dia. c = .625 .005 (15,88 0,13) dia. d = .255 .032 (6,48 0,81) e = .093 .010 (2,36 0,25) f = .355 .015 (9,02 0,38) g = .220 .025 (5,59 0,64) dim a .020 (0,51) (see chart) f g d e c b label* *part number and e.i.a. date code label .186 (4,72) ref. c l c l spst n.o. spdt - bbm n.c. n.o. c. dpdt bbm n.c. n.o. c1 n.c. n.o. c2 pushbutton 51
grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com pushbutton switches butt contact pushbutton switches series 30 and 46 decorator line features ? attractive front panel bezels (6 choices) ? space-saving: only 11/16" square ? spst with option of positive feel ? spdt, dpdt with momentary contact or alternate action ? sturdy metal sleeve or bushing and nut provide secure mounting circuitry spstCnormally open spdtCbreak before make dpdtCbreak before make 46-01-05-500-* 46-01-07-500-* 46-01-08-500-* 46-01-09-500-* 30-01-01-500-* 30-01-04-500-* momentary 46-01-08-500-* alt. action 46-01-09-500-* partial part no. feature momentary 30-01-01-500-* .880 (22,35) pos. feel 30-01-04-500-* 1.037 (26,34) partial part no. feature dim. a dimensions in inches (and millimeters) *partial part number; complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see ordering information. mounting hardware for 46-01-08-500 & 46-01-09-500 (see drawing aboveCmounting hardware shipped loose.) for spst & spdt switches one internal tooth lockwasher one knurled ring nut .640 .010 (16,26 0,25) dia. .094 .010 (2,39 0,25) thk. front views and mounting momentary 46-01-05-500-* 1.174 (29,82) alt. action 46-01-07-500-* 1.264 (32,11) partial part no. feature dim. a terminals are marked on switch. 1/2-32 un-2a thread .100 .005 ( 2 , 54 0 , 13 ) .220 .025 (5,59 0,64) dim. a .015 (0,38) see chart .255 .032 (6,48 0,81) .093 .005 (2,36 0,13) .590 .003 (14.99 0,08) square will fit panel .020 (0,51) min. to .125 (3,18) max. label* *part number and e.i.a. date code label terminals are marked on switch. will fit panel .020 (0,51) min. to .125 (3,18) max. 1/2-32 un-2a thread dim. a .015 (0,38) see chart .255 .032 (6,48 0,81) .093 .005 (2,36 0,13) .590 .003 (14.99 0,08) square nc no c insulating barrier .150 .010 (3,81 0,25) .187 .015 (4,75 , 0,38) label* *part number and e.i.a. date code label .150 .010 (3,81 0,25) 1.194 .031 (30,33 0,79) .281 .032 (7,14 0,81) .093 .010 (2,36 0,25) .605 (15,37) square max. insulating barrier will fit panel .010 (0,25) min. to .218 (5,54) max. nc no c c nc no mounting sleeve .187 .015 (4,75 0,38) e.i.a. date code label spst n.o. spdt - bbm n.c. n.o. c. dpdt bbm n.c. n.o. c1 n.c. n.o. c2 .485 .010 (12,32 0,25) .687 (17,45) max. .610 .004 (15,49 0,02) sq. .610 .004 (15,49 0,02) wide slot .031 (0,79) max. radius single stacked recommended panel cutout for square bezel switches note: all switches fit panels up to .250 (6,35) thick. front and back panel access required for installation. pushbutton 52
pushbutton switches grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com butt contact pushbutton switches contacts butt type wiping type rating at 115 vac res. 1 amp 0.25 amp rating at 220 vac res. 0.5 amp 0.125 amp circuitry spstCn.o. (standard); spdt, dpdt spstCn.o. (w/overtravel), break before make spstCn.o. (w/positive feel) life expectancy spstCn.o. (standar d): 250,000 1,000,000 operations operations spstCn.o. (w/positive feel): 200,000 operations; spstCn.o. (w/overtravel): 500,000 operations contact resistance 25 milliohms or less on a new switch voltage breakdown 1000 vac between mutually insulated parts insulation resistance 1000 megohms minimum operating temperature -40c to +85c ratings electrical ratings series 46 series 30 specifications material and finishes lockwasher (round bezel): steel, zinc trivalent chromate-plated behind panel plate (square bezel): steel, zinc trivalent chromate-plated mounting sleeve and screws (46-01-08- 500, 46-01-09-500 only): steel, zinc trivalent chromate-plated. base: phenolic per mil-m- 14, type cfg square bezel: abs (spst, spdt), thermoset plastic (dpdt) mounting nut, bushing, and round bezel: brass, tin zinc button cap: abs (ul version is pps) shorting bar: series 30Cfine silver contact area series 46Cphosphor bronze, silver-plated terminals: series 30Cfine silver contact area with silver-plated terminal ends series 46Csilver contact surface with tin/silver clad terminal ends spring: tinned music wire plunger: polyphenylene sulfide (pps) for 30- 01-01-500-x and 46-01-05-500-x. nickel-plated brass for 46-01-07-500-x, 46-05-07-502-x, 46- 01-09-500-x and 46-05-09-502-x. zinc trivalent chromate-plated brass for 46-01-08-500-x. polycarbonate for all others. operating temperature: -40c to +85c legends all button caps can be printed in epoxy ink. any type style or design can be used to produce the legend. if news gothic condensed style is used, limits can be approximated from the chart below; actual limits depend on specific legend. grayhill type identification no. round button character and line limitation 4gh088 1gh125 3gh187 2gh250 15 off tab n/a 3 char. 1 line 3 char. 1 line 2 char. 1 line n/a square button character and line limitation tab locate index off 15 6 char. 2 lines 5 char. 1 lines 3 char. 1 line 2 char. 1 line sample style and sizes abcdefghij abcdefghij abcdef abcd character height (typ.) .083 (2,1) .138 (3,5) .207 (5,3) .276 (7,0) there is a per-button impression charge. a nominal set up charge per legend applies to orders of 1 to 99 pieces. (non-standard legends are subject to a one time tooling charge. contact grayhill for more specifics.) .080 .015 (2,03 0,38) positive feel & .156 .015 overtravel (3,96 0,38) 46-01-05-500-* 46-05-05-502-* spdt momentary .180 min. (4,57) 1.1 .25 lbs. .210 .015 (5,33 0,38) 46-01-08-500-* 46-05-08-502-* dpdt momentary .180 min. (4,57) 1.6 .5 lbs. .210 .015 (5,33 0,38) ordering information & operating features butt contact square bezel round bezel circuitry feature total travel overtravel actuating force bottoming force *partial part number; complete the part number by adding a dash for button color: white C01; red C03; green C04; blue C05; yellow C06 or black C07. 30-01-01-500-* 30-05-01-502-* spstCn.o. momentary 10 4 oz. 46-01-09-500-* 46-05-09-502-* dpdt alternate action 1.8 .5 lbs. wiping contact 46-01-07-500-* 46-05-07-502-* spdt alternate action 1.5 .25 lbs. available from your local grayhill distributor. for prices and discounts, contact a local sales office, an authorized local distributor or grayhill. standard options epoxy-sealed terminals and wire leads, see page e-35. 30-01-04-500-* 30-05-04-502-* spstCn.o. 18 4 oz. .046 min. alternate action (push-push) operating sequence part number* 46-05-07-502, 46-05-09-502, 46-01-07-500, 46-01-09-500 alternate action (push-push) switches provide a maintained actuated position until the button is pushed again to release. lock down position c. & n.o. shorted n.c. open up position c. & n.c. shorted n.o. open push to actuate 13/64 (5,16) approx. 3/32 (2,38) approx. pushbutton 53
|
