symbol v ds v gs i dm t j , t stg symbol ty p max 50 62.5 73 110 r jl 31 40 w junction and storage temperature range a p d c 2 1.28 -55 to 150 t a =70c i d continuous drain current a maximum units parameter t a =25c t a =70c 60 maximum junction-to-ambient a steady-state 6.3 5 40 c/w absolute maximum ratings t a =25c unless otherwise noted v v 20 pulsed drain current b power dissipation t a =25c gate-source voltage drain-source voltage maximum junction-to-lead c steady-state c/w thermal characteristics parameter units maximum junction-to-ambient a t 10s r ja c/w AO4826 features v ds (v) = 60v i d = 6.3a (v gs = 10v) r ds(on) < 25m ? (v gs = 10v) r ds(on) < 30m ? (v gs = 4.5v) the AO4826 uses advanced trench technology to provide excellent r ds(on) and low gate charge. this device is suitable for use as a load switch or in pwm applications. standard product AO4826 is pb-free (meets rohs & sony 259 specifications). AO4826l is a green product ordering option. AO4826 and a o4826l are electrically identical. g1 d1 s1 g2 d2 s2 g1 s1 g2 s2 d1 d1 d2 d2 1 2 3 4 8 7 6 5 soic-8 effect transistor n-channel enhancement mode field general description www.freescale.net.cn 1 / 4
AO4826 symbol min typ max units bv dss 60 v 1 t j =55c 5 i gss 100 na v gs(th) 1 2.1 3 v i d(on) 40 a 20 25 t j =125c 34 42 22 30 m ? g fs 27 s v sd 0.74 1 v i s 3a c iss 1920 2300 pf c oss 155 pf c rss 116 pf r g 0.65 0.8 ? q g (10v) 47.6 58 nc q g (4.5v) 24.2 30 nc q gs 6nc q gd 14.4 nc t d(on) 7.6 ns t r 5ns t d(off) 28.9 ns t f 5.5 ns t rr 33.2 40 ns q rr 43 nc this product has been designed and qualified for the consumer market. applications or uses as critical components in life support devices or systems are not authorized. aos does not assume any liability arising out of such applications or uses of its products. aos reserves the right to improve product design, functions and reliability without notice. body diode reverse recovery time body diode reverse recovery charge i f =6.3a, di/dt=100a/ s drain-source breakdown voltage on state drain current i d =250 a, v gs =0v v gs =10v, v ds =5v v gs =10v, i d =6.3a reverse transfer capacitance i f =6.3a, di/dt=100a/ s electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions i dss a gate threshold voltage v ds =v gs i d =250 a v ds =48v, v gs =0v v ds =0v, v gs = 20v zero gate voltage drain current gate-body leakage current r ds(on) static drain-source on-resistance forward transconductance diode forward voltage m ? v gs =4.5v, i d =5.7a i s =1a,v gs =0v v ds =5v, i d =6.3a total gate charge gate source charge gate resistance v gs =0v, v ds =0v, f=1mhz turn-on rise time turn-off delaytime v gs =10v, v ds =30v, r l =4.7 ? , r gen =3 ? turn-off fall time maximum body-diode continuous current input capacitance output capacitance turn-on delaytime dynamic parameters v gs =10v, v ds =30v, i d =6.3a total gate charge gate drain charge v gs =0v, v ds =30v, f=1mhz switching parameters a: the value of r ja is measured with the device mounted on 1in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. the value in any given application depends on the user's specific board design. the current rating is based on the t 10s thermal resistance rating. b: repetitive rating, pulse width limited by junction temperature. c. the r ja is the sum of the thermal impedence from junction to lead r jl and lead to ambient. d. the static characteristics in figures 1 to 6 are obtained using 80 s pulses, duty cycle 0.5% max. e. these tests are performed with the device mounted on 1 in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. the soa curve provides a single pulse rating. rev 4 : aug 2005 www.freescale.net.cn 2 / 4
AO4826 typical electrical and thermal characteristics 0 10 20 30 40 012345 v ds (volts) fig 1: on-region characteristics i d (a) v gs =3v 3.5v 4v 4.5v 10v 0 5 10 15 20 25 30 1.5 2 2.5 3 3.5 4 v gs (volts) figure 2: transfer characteristics i d (a) 16 18 20 22 24 0 5 10 15 20 i d (a) figure 3: on-resistance vs. drain current and gate voltage r ds(on) (m ? ) 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 0.0 0.2 0.4 0.6 0.8 1.0 v sd (volts) figure 6: body-diode characteristics i s (a) 25c 125c 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 25 50 75 100 125 150 175 temperature (c) figure 4: on-resistance vs. junction temperature normalized on-resistance v gs =10v v gs =4.5v i d =5.7a 10 20 30 40 50 246810 v gs (volts) figure 5: on-resistance vs. gate-source voltage r ds(on) (m ? ) 25c 125c v ds =5v v gs =4.5v v gs =10v i d =6.3a 25c 125c i d =6.3a www.freescale.net.cn 3 / 4
AO4826 typical electrical and thermal characteristic s 0 2 4 6 8 10 0 1020304050 q g (nc) figure 7: gate-charge characteristics v gs (volts) 0 500 1000 1500 2000 2500 3000 3500 0 5 10 15 20 25 30 v ds (volts) figure 8: capacitance characteristics capacitance (pf) c iss 0 10 20 30 40 0.001 0.01 0.1 1 10 100 1000 pulse width (s) figure 10: single pulse power rating junction-to- ambient (note e) power (w) 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 pulse width (s) figure 11: normalized maximum transient thermal impedance z ja normalized transient thermal resistance c oss c rss 0.1 1.0 10.0 100.0 0.1 1 10 100 v ds (volts) i d (amps) figure 9: maximum forward biased safe operating area (note e) 100 s 10ms 1m s 0 .1 s 1 s 10s d c t j(max) =150c t a =25c r ds(on) limited v ds =15v i d =6.3a single pulse d=t on /t t j,pk =t a +p dm .z ja .r ja r ja =62.5c/w t o n t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse t j(max) =150c t a =25c 10 s www.freescale.net.cn 4 / 4
|
