View 32-01-T4C-4PRB09_4737627.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 1 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee lead (pb) free product - rohs compliant feature ? rohs compliant. ? piranha package. ? colorless clear resin. ? low thermal resistance ? packaged in tubes for automatic insertion equipment. ? total flux: 2850 to 5650 mlm at 30ma. ? typical chromaticity coordinates x=0.30, y=0.29 ? according to cie1931. applications ? electronic signs and signals ? general lighting application device selection guide chip material emitted color resin color ingan white water clear
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 2 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 110 mw operating temperature t opr -40 ~ +85 storage temperature tstg -40 ~ +100 thermal resistance rth j-a 220 k/w esd hbm 4000 v esd (classification acc. aec q101) esd mm 200 v soldering temperature t sol wave soldering : 260 for 5 sec. hand soldering : 350 for 3 sec. .
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 3 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition total flux v 2850 --- 5650 mlm i f =30ma viewing angle 2 1/2 --- 130 --- deg i f =30ma x ---- 0.30 ---- ---- i f =30ma chromaticity coordinates y ---- 0.29 ---- ---- i f =30ma forward voltage v f 2.8 --- 3.8 v i f =30ma reverse current i r --- --- 10 a v r =5v note: 1. tolerance of total flux: 11% 2. tolerance of forward voltage: 0.1v 2. tolerance of color coordinates: 0.01
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 4 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee bin range of forward voltage (ta=25 ) bin code min. max. unit condition 0 2.8 3.0 1 3.0 3.2 2 3.2 3.4 3 3.4 3.6 4 3.6 3.8 v i f =30ma
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 5 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee cie chromaticity diagram 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.0 0.2 0.4 0.6 0.8 b5 ao b6 cie-y cie-x color ranks (if=30ma ta=25 ) color ranks cie x 0.264 0.283 0.296 0.28 a0 y 0.267 0.305 0.267 0.248 x 0.287 0.307 0.311 0.296 b5 y 0.295 0.315 0.294 0.276 x 0.307 0.33 0.33 0.311 b6 y 0.315 0.339 0.318 0.294
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 6 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee bin range of total flux (ta=25 ) bin code min. max. unit condition p 2850 3600 q 3600 4500 r 4500 5650 mlm i f =30ma
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 7 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee typical electro-optical characteristics curves typical curve of spectral distribution diagram characteristics of radiation 350 450 550 650 750 400 500 600 700 wavelength (nm) 0.2 0.6 1.0 0.0 0.4 0.8 1.2 r e l a t iv e in t e n s it y 0.0 0.2 0.4 0.6 0.8 1.0 viewing angle (degree) relative intensity (a.u.) -10 0 -30 0 -50 0 -70 0 -90 0 90 0 80 0 60 0 70 0 40 0 50 0 30 0 20 0 10 0 0 0
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 8 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee forward current vs. forward voltage (ta=25 ) chromaticity coordinate vs. forward current (ta=25 ) forward current (ma) chromaticity coordinates forward voltage (v) forward current (ma) relative luminous flux vs. forward current (ta=25 ) max. permissible forward current vs. ambient temperature relative luminous intensity forward current (ma) forward current (ma) ambient temperature ( ) 0 20406080100 5 15 25 35 0 10 20 30 40 10 20 30 40 50 0.24 0.26 0.28 0.30 0.32 0.34 y x 0 5 10 15 20 25 30 0.00 0.20 0.40 0.60 0.80 1.00 2.0 2.5 3.0 3.5 4.0 5 10 15 20 25 fdvl(v)
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 9 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee package dimension notes: 1. an epoxy meniscus may extend about 1.5mm(0.059") down the leads 2. tolerances unless dimensions 0.25mm 3. all dimensions are in millimeters
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 10 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee moisture resistant packing materials tube tube label explanation ? part no: product number ? qty: packing quantity ? lot no: lot number ? cat: rank of (vf)(note*)( v) note: d /cie/color temperature note: tolerances unless mentioned 2.0mm. unit = mm standard box tube label explanation ? cpn: customer?s product number ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note*)( v) note: d /cie/color temperature ? hue/ref: reference ? lot no: lot number note: tolerances unless mentioned 3.0mm. unit = mm part no: qty: lot no: cat: label area
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 11 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee packing quantity packing material length width height (mm) tube quantity (pcs) led quantity (pcs) tube 485 x 9.5 x 14.8 1 60 standard box 510 x 100 x 45 30 1800 large box 510 x 150 x 90 105 6300 note: 1. normal packing specification is use st andard box, unless already defined initially. 2. vacuum packing with anti-static bag after packing in standard box. 3. specifications are subject to change without prior notice.
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 12 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee notes 1. lead forming ? during lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming should be done before soldering. ? avoid stressing the led package during lead s forming. the stress to the base may damage the led?s characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperatures may cause failure of the leds. ? when mounting the leds onto a pcb, the pcb holes must be aligned exactly with the lead position of the led. if the leds are m ounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. storage ? the leds should be stored at 30c or less a nd 70%rh or less after being shipped from everlight and the storage life limits are 3 mont hs. if the leds are stored for 3 months or more, they can be stored for a year in a s ealed container with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. solder the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead fr ame while the leds are at high temperature particularly when soldering. ? recommended soldering conditions: hand soldering dip soldering temp. at tip of iron 300 max. (30w max.) preheat temp. 100 max. (60 sec max.) soldering time 3 sec max. bath temp. 260 max. distance no lower than 1.6mm from the base of stopper bath time. 5 sec max. distance no lower than 1.6mm
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 13 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee from the base of stopper ? dip and hand soldering should not be done more than one time ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or vibration until the leds return to room temperature. ? a rapid-rate process is not recommended for cooling the leds down from the peak temperature. ? although the recommended soldering conditions ar e specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only w ith isopropyl alcohol at room temperature for a duration of no more than one minute. dry at room temperature before use. ? do not clean the leds by the ultrasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the led 5. circuit protection ? below the zener reference voltage vz, all the current flows through led and as the voltage rises to vz, the zener diode ?breakdow n." if the voltage tries to rise above vz current flows through the zener branch to keep the voltage at exactly vz. ? when the led is connected using serial circu it, if either piece of led is no light up but current can?t flow through causing others to light down. in new design, the led is parallel with zener diode. if either piece of led is no light up but current can flow through causing others to light up.
everlight electronics co., ltd. technical data sheet flat power led 32-01/t4c-4prb everlight electronics co., ltd. http://www.everlight.com rev.: 3 page: 14 of 14 device no.: dle-302-032 published date: 24-nov.-2009 created by: ken lee 6. heat management ? heat management of leds must be taken in to consideration during the design stage of led application. the current should be de -rated appropriately by referring to the de-rating curve found in each product specification. ? the temperature surrounding the led in the application should be controlled. please refer to the data sheet de-rating curve. 7. esd (electrostatic discharge) ? electrostatic discharge (esd) or surge current (eos) can damage leds. ? an esd wrist strap, esd shoe strap or antista tic gloves must be worn whenever handling leds. ? all devices, equipment and machinery must be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic le ns as a result of friction between leds during storage and handing. 8. other ? above specification may be changed without notice. everlight will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of th e product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. these specification sheets include material s protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent.

▲Up To Search▲

Price & Availability of 32-01-T4C-4PRB09

	To Download 32-01-T4C-4PRB09 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .