www.clare.com ds-cpc1726-r02 1 rohs 2002/95/ec e 3 pb cpc1726 single-pole, normally open dc power sip relay part # description cpc1726y 4-pin (8-pin body) power sip package (25 per tube) parameter rating units blocking voltage 250 v p load current 1 a dc on-resistance 0.75 applications features description ordering information pin configuration ? industrial controls ? motor control ? robotics ? medical equipment?patient/equipment isolation ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? ic equipment ? home appliances ? handle load currents up to 1a dc ? 2500v rms input/output isolation ? power sip package ? high reliability ? no moving parts ? low drive power requirements (ttl/cmos compatible) ? arc-free with no snubbing circuits ? no emi/rfi generation ? machine insertable, wave solderable clare and ixys have combined to bring optomos ? technology, reliability and compact size to a new family of high power solid state relays. as part of that family, the cpc1726 is a 1-form-a solid state relay. the cpc1726 employs optically coupled mosfet technology to provide 2500v rms of input to output isolation. the efficient mosfet switches and photovoltaic die use clare?s patented optomos architecture while the highly efficient gaalas infrared led provides the optically coupled control. the combination of low on resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications. cpc1726 pinout switching characteristics of normally open devices approvals ? ul 508 certified component: file e69938 ? csa certified component: certificate 1172007 form-a i f i load 10% 90% t on t off
www.clare.com 2 r02 cpc1726 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc parameter ratings units blocking voltage 250 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 1600 mw isolation voltage, input to output 2500 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 3.33 mw / oc 2 derate linearly 16.667 mw / oc parameter conditions symbol min typ max units output characteristics load current, continuous free air i l --1a dc peak load current t=10ms i lpk --3a on-resistance 1 i l =1a r on - 0.64 0.75 off-state leakage current v l =250v p i leak --1a switching speeds turn-on i f =10ma, v l =10v t on - 0.67 5 ms turn-off t off - 0.04 2 output capacitance v l =50v, f=1mhz c off -60 -pf input characteristics input control current i l =1a i f - 1.8 10 ma input dropout current - i f 0.6 - - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r - - 10 a input/output characteristics input to output capacitance f=1mhz c i/o -2 -pf 1 measurement taken within 1 second of on-time. electrical characteristics @ 25oc parameter conditions symbol min typ max units thermal resistance (junction to case) - r jc - 1.5 - c/w thermal characteristics
cpc1726 www.clare.com 3 r02 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. turn-on time (ms) 0.49 0.55 0.61 0.67 0.73 0.79 0.85 device count (n) 0 5 10 15 20 typical turn-ontime distribution (n=50, i f =10ma, v l =10v, t a =25oc) turn off time (ms) 0.035 0.038 0.041 0.044 0.047 0.050 device count (n) 0 5 10 15 20 25 typical turn-off time distribution (n=50, i f =10ma, v l =10v, t a =25oc) on resistance ( ) 0.61 0.62 0.63 0.64 0.65 0.66 0.67 device count (n) 0 5 10 15 20 25 typical on-resistance distribution (n=50, i f =10ma, i l =1a, t a =25oc) blocking voltage (v p ) 285 288 291 294 297 300 device count (n) 0 5 10 15 20 25 30 typical blocking voltage distribution (n=50, t a =25oc) led forward voltage (v) 1.230 1.235 1.240 1.245 1.250 device count (n) 0 5 10 15 20 25 30 typical led forward voltage drop (n=50, i f =5ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage (v) 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage vs. temperature i f =50ma i f =10ma i f =20ma led forward current (ma) 0 1020304050 turn-on time ( s) 100 200 300 400 500 600 700 typical turn-on time vs. led forward current (v l =10v, r l =1k ) temperature (oc) -40 -20 0 20 40 60 80 100 turn-on time (ms) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 typical turn-on time vs. temperature (i f =10ma, v l =10v, r l =1k ) temperature (oc) -40 -20 0 20 40 60 80 100 led current (ma) 1.6 2.0 2.4 2.8 3.2 3.6 typical i f for switch operation vs. temperature (i l =500ma) led forward current (ma) 0 1020304050 turn-off time ( s) 40 45 50 55 60 typical turn-off time vs. led forward current (v l =10v, r l =1k ) temperature (oc) -40 -20 0 20 40 60 80 100 turn-off time (ms) 0.025 0.030 0.035 0.040 0.045 0.050 0.055 typical turn-off time vs. temperature (i f =10ma, v l =10v, r l =1k ) temperature (oc) -40 -20 0 20 40 60 80 100 led current (ma) 1.6 1.7 1.8 1.9 2.0 2.1 2.2 typical i f for switch dropout vs. temperature
www.clare.com 4 r02 cpc1726 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. load voltage (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 load current (ma) 0 200 400 600 800 1000 1200 typical load current vs. load voltage (i f =10ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 load current (ma dc ) 500 600 700 800 900 1000 1100 typical load current vs. temperature (i f =10ma) temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( ) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 typical on-resistance vs. temperature (i f =10ma, i l =500ma) temperature (oc) -40 -20 0 20 40 60 80 100 blocking voltage (v p ) 275 280 285 290 295 300 305 310 315 typical blocking voltage vs. temperature temperature (oc) -40 -20 0 20 40 60 80 100 leakage current (na) 0 5 10 15 20 25 30 leakage current vs. temperature measured across pins 3 & 4 (v l =250v) energy rating curve free air, no heat sink time load current (a) 8 7 6 5 4 3 2 1 0 1ms 100ms 10s 10ms 1s 100s 10 s 100 s
cpc1726 www.clare.com 5 r02 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating cpc1726y msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time cpc1726y 245oc for 30 seconds board wash clare recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. rohs 2002/95/ec e 3 pb
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-cpc1726-r02 ?copyright 2010, clare, inc. optomos ? is a registered trademark of clare, inc. all rights reserved. printed in usa. 11/1/2010 for additional information please visit our website at: www.clare.com 6 cpc1726 mechanical dimensions dimensions mm (inches) 1.150 dia. x4 (0.045 dia. x4) 2.540 (0.100) pin 1 10.160 (0.400) 5.080 (0.200) 1.75 (0.069) 10.1600.127 (0.4000.005) 21.0820.381 (0.8300.015) 4.5720.127 (0.1800.005) 1.0160.127 (0.0400.005) 10.1600.127 (0.4000.005) 1.778 (0.070) 5.0800.127 (0.2000.005) 2.5400.127 (0.1000.005) 0.7620.076 (0.0300.003) 1.6510.102 (0.0650.004) 7o typ 4 places 7o typ 4 places 3.3020.051 (0.1300.002) 0.3810.013 (0.0150.0005) 1.778 (0.070) pcb hole pattern cpc1726y
|
